[i-g-t 04/14] tests/kms_color: New subtests for Plane gamma
Harry Wentland
harry.wentland at amd.com
Tue Jan 4 21:19:01 UTC 2022
On 2022-01-02 23:05, Modem, Bhanuprakash wrote:
>> From: Harry Wentland <harry.wentland at amd.com>
>> Sent: Friday, November 26, 2021 10:25 PM
>> To: Modem, Bhanuprakash <bhanuprakash.modem at intel.com>; igt-
>> dev at lists.freedesktop.org; dri-devel at lists.freedesktop.org
>> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>; Juha-Pekka Heikkila
>> <juhapekka.heikkila at gmail.com>; Shankar, Uma <uma.shankar at intel.com>
>> Subject: Re: [i-g-t 04/14] tests/kms_color: New subtests for Plane gamma
>>
>> On 2021-11-15 04:47, Bhanuprakash Modem wrote:
>>> To verify Plane gamma, draw 3 gradient rectangles in red, green and blue,
>>> with a maxed out gamma LUT and verify we have the same CRC as drawing solid
>>> color rectangles.
>>>
>>> Cc: Harry Wentland <harry.wentland at amd.com>
>>> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
>>> Cc: Juha-Pekka Heikkila <juhapekka.heikkila at gmail.com>
>>> Cc: Uma Shankar <uma.shankar at intel.com>
>>> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
>>> ---
>>> tests/kms_color.c | 179 +++++++++++++++++++++++++++++++++++++++++++++-
>>> 1 file changed, 178 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/tests/kms_color.c b/tests/kms_color.c
>>> index 775f35964f..b45d66762f 100644
>>> --- a/tests/kms_color.c
>>> +++ b/tests/kms_color.c
>>> @@ -24,7 +24,34 @@
>>>
>>> #include "kms_color_helper.h"
>>>
>>> -IGT_TEST_DESCRIPTION("Test Color Features at Pipe level");
>>> +IGT_TEST_DESCRIPTION("Test Color Features at Pipe & Plane level");
>>> +
>>> +#define MAX_SUPPORTED_PLANES 7
>>> +#define SDR_PLANE_BASE 3
>>> +
>>> +typedef bool (*test_t)(data_t*, igt_plane_t*);
>>> +
>>> +static bool is_hdr_plane(const igt_plane_t *plane)
>>> +{
>>> + return plane->index >= 0 && plane->index < SDR_PLANE_BASE;
>>> +}
>>> +
>>> +static bool is_valid_plane(igt_plane_t *plane)
>>> +{
>>> + int index = plane->index;
>>> +
>>> + if (plane->type != DRM_PLANE_TYPE_PRIMARY)
>>> + return false;
>>> +
>>> + /*
>>> + * Test 1 HDR plane, 1 SDR plane.
>>> + *
>>> + * 0,1,2 HDR planes
>>> + * 3,4,5,6 SDR planes
>>> + *
>>> + */
>>
>> This seems to be about Intel HW. AMD HW for example does
>> not have HDR or SDR planes, only one generic plane.
>>
>>> + return index >= 0 && index < MAX_SUPPORTED_PLANES;
>>> +}
>>>
>>> static void test_pipe_degamma(data_t *data,
>>> igt_plane_t *primary)
>>> @@ -638,6 +665,122 @@ static void test_pipe_limited_range_ctm(data_t *data,
>>> }
>>> #endif
>>>
>>> +static bool plane_gamma_test(data_t *data, igt_plane_t *plane)
>>> +{
>>> + igt_output_t *output;
>>> + igt_display_t *display = &data->display;
>>> + drmModeModeInfo *mode;
>>> + struct igt_fb fb;
>>> + drmModePropertyPtr gamma_mode = NULL;
>>> + uint32_t i;
>>> + bool ret = true;
>>> + igt_pipe_crc_t *pipe_crc = NULL;
>>> + color_t red_green_blue[] = {
>>> + { 1.0, 0.0, 0.0 },
>>> + { 0.0, 1.0, 0.0 },
>>> + { 0.0, 0.0, 1.0 }
>>> + };
>>> +
>>> + igt_info("Plane gamma test is running on pipe-%s plane-%s(%s)\n",
>>> + kmstest_pipe_name(plane->pipe->pipe),
>>> + kmstest_plane_type_name(plane->type),
>>> + is_hdr_plane(plane) ? "hdr":"sdr");
>>> +
>>
>> is_hdr_plane is Intel-specific.
>>
>>> + igt_require(igt_plane_has_prop(plane, IGT_PLANE_GAMMA_MODE));
>>> + igt_require(igt_plane_has_prop(plane, IGT_PLANE_GAMMA_LUT));
>>> +
>>> + pipe_crc = igt_pipe_crc_new(data->drm_fd,
>>> + plane->pipe->pipe,
>>> + INTEL_PIPE_CRC_SOURCE_AUTO);
>>> +
>>> + output = igt_get_single_output_for_pipe(display, plane->pipe->pipe);
>>> + igt_assert(output);
>>> +
>>> + igt_output_set_pipe(output, plane->pipe->pipe);
>>> + mode = igt_output_get_mode(output);
>>> +
>>> + /* Create a framebuffer at the size of the output. */
>>> + igt_assert(igt_create_fb(data->drm_fd,
>>> + mode->hdisplay,
>>> + mode->vdisplay,
>>> + DRM_FORMAT_XRGB8888,
>>> + DRM_FORMAT_MOD_LINEAR,
>>> + &fb));
>>> + igt_plane_set_fb(plane, &fb);
>>> +
>>> + /* Disable Pipe color props. */
>>> + disable_ctm(plane->pipe);
>>> + disable_degamma(plane->pipe);
>>> + disable_gamma(plane->pipe);
>>> +
>>> + disable_plane_ctm(plane);
>>> + disable_plane_degamma(plane);
>>> + igt_display_commit2(display, display->is_atomic ?
>>> + COMMIT_ATOMIC : COMMIT_LEGACY);
>>> +
>>> + gamma_mode = get_plane_gamma_degamma_mode(plane, IGT_PLANE_GAMMA_MODE);
>>> +
>>> + /* Iterate all supported gamma modes. */
>>> + for (i = 0; i < gamma_mode->count_enums; i++) {
>>> + igt_crc_t crc_gamma, crc_fullcolors;
>>> + segment_data_t *segment_info = NULL;
>>> + struct drm_color_lut_ext *lut = NULL;
>>> + uint32_t lut_size = 0;
>>> +
>>> + /* Ignore 'no gamma' from enum list. */
>>> + if (!strcmp(gamma_mode->enums[i].name, "no gamma"))
>>> + continue;
>>> +
>>
>> It might still make sense to test that this is doing bypass.
>
> As we know gamma_mode->enum[i].name represents the name of the
> gamma mode and gamma_mode->enum[i].value would be the LUT blob
> address of that particular gamma_mode.
>
> For "no gamma" case the blob address is NULL, so we can't commit
> this mode. Hence skipping this mode.
>
I was thinking it'd be good to test the "no gamma" case as well
here, i.e. the case were we set a NULL blob. I'm not sure what
you mean when you say "we can't commit this mode."
Harry
>>
>>> + igt_info("Trying to use gamma mode: \'%s\'\n", gamma_mode-
>>> enums[i].name);
>>> +
>>> + /* Draw solid colors with no gamma transformation. */
>>> + disable_plane_gamma(plane);
>>> + paint_rectangles(data, mode, red_green_blue, &fb);
>>> + igt_plane_set_fb(plane, &fb);
>>> + igt_display_commit2(display, display->is_atomic ?
>>> + COMMIT_ATOMIC : COMMIT_LEGACY);
>>> + igt_wait_for_vblank(data->drm_fd,
>>> + display->pipes[plane->pipe->pipe].crtc_offset);
>>> + igt_pipe_crc_collect_crc(pipe_crc, &crc_fullcolors);
>>> +
>>> + /* Draw gradient colors with gamma LUT to remap all
>>> + * values to max red/green/blue.
>>> + */
>>> + segment_info = get_segment_data(data, gamma_mode->enums[i].value,
>>> + gamma_mode->enums[i].name);
>>> + lut_size = sizeof(struct drm_color_lut_ext) * segment_info-
>>> entries_count;
>>> + lut = create_max_lut(segment_info);
>>> + set_plane_gamma(plane, gamma_mode->enums[i].name, lut, lut_size);
>>> +
>>> + paint_gradient_rectangles(data, mode, red_green_blue, &fb);
>>> + igt_plane_set_fb(plane, &fb);
>>> + igt_display_commit2(display, display->is_atomic ?
>>> + COMMIT_ATOMIC : COMMIT_LEGACY);
>>> + igt_wait_for_vblank(data->drm_fd,
>>> + display->pipes[plane->pipe->pipe].crtc_offset);
>>> + igt_pipe_crc_collect_crc(pipe_crc, &crc_gamma);
>>> +
>>> + /* Verify that the CRC of the software computed output is
>>> + * equal to the CRC of the gamma LUT transformation output.
>>> + */
>>> + ret &= igt_check_crc_equal(&crc_gamma, &crc_fullcolors);
>>> +
>>> + free(lut);
>>> + clear_segment_data(segment_info);
>>> + }
>>> +
>>> + disable_plane_gamma(plane);
>>> + igt_plane_set_fb(plane, NULL);
>>> + igt_output_set_pipe(output, PIPE_NONE);
>>> + igt_display_commit2(display, display->is_atomic ?
>>> + COMMIT_ATOMIC : COMMIT_LEGACY);
>>> +
>>> + igt_pipe_crc_free(pipe_crc);
>>> + drmModeFreeProperty(gamma_mode);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> static void
>>> prep_pipe(data_t *data, enum pipe p)
>>> {
>>> @@ -890,6 +1033,37 @@ run_invalid_tests_for_pipe(data_t *data, enum pipe p)
>>> invalid_ctm_matrix_sizes(data, p);
>>> }
>>>
>>> +static void run_plane_color_test(data_t *data, enum pipe pipe, test_t test)
>>> +{
>>> + igt_plane_t *plane;
>>> + int count = 0;
>>> +
>>> + for_each_plane_on_pipe(&data->display, pipe, plane) {
>>> + if (!is_valid_plane(plane))
>>> + continue;
>>> +
>>> + igt_assert(test(data, plane));
>>> +
>>> + count++;
>>> + }
>>> +
>>> + igt_require_f(count, "No valid planes found.\n");
>>> +}
>>> +
>>> +static void run_tests_for_plane(data_t *data, enum pipe pipe)
>>> +{
>>> + igt_fixture {
>>> + igt_require_pipe(&data->display, pipe);
>>> + igt_require_pipe_crc(data->drm_fd);
>>> + igt_require(data->display.pipes[pipe].n_planes > 0);
>>> + igt_display_require_output_on_pipe(&data->display, pipe);
>>> + }
>>> +
>>> + igt_describe("Compare maxed out plane gamma LUT and solid color linear
>> LUT");
>>
>> I can't seem to see the linear LUT test. This only seems to test
>> the max LUT.
>>
>> Harry
>>
>>> + igt_subtest_f("pipe-%s-plane-gamma", kmstest_pipe_name(pipe))
>>> + run_plane_color_test(data, pipe, plane_gamma_test);
>>> +}
>>> +
>>> igt_main
>>> {
>>> data_t data = {};
>>> @@ -910,6 +1084,9 @@ igt_main
>>>
>>> igt_subtest_group
>>> run_invalid_tests_for_pipe(&data, pipe);
>>> +
>>> + igt_subtest_group
>>> + run_tests_for_plane(&data, pipe);
>>> }
>>>
>>> igt_fixture {
>>>
>
More information about the dri-devel
mailing list