[PATCH] drm/panfrost: Check for error num after setting mask

[Jiasheng Jiang]

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.

Fixes: d9b631f0a0c4 ("drm/panfrost: Set DMA masks earlier")
Signed-off-by: Jiasheng Jiang <jiasheng at iscas.ac.cn>
---
 drivers/gpu/drm/panfrost/panfrost_gpu.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c b/drivers/gpu/drm/panfrost/panfrost_gpu.c
index 2aae636f1cf5..107ad2d764ec 100644
--- a/drivers/gpu/drm/panfrost/panfrost_gpu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_gpu.c
@@ -359,8 +359,11 @@ int panfrost_gpu_init(struct panfrost_device *pfdev)
 
 	panfrost_gpu_init_features(pfdev);
 
-	dma_set_mask_and_coherent(pfdev->dev,
+	err = dma_set_mask_and_coherent(pfdev->dev,
 		DMA_BIT_MASK(FIELD_GET(0xff00, pfdev->features.mmu_features)));
+	if (err)
+		return err;
+
 	dma_set_max_seg_size(pfdev->dev, UINT_MAX);
 
 	irq = platform_get_irq_byname(to_platform_device(pfdev->dev), "gpu");
-- 
2.25.1