[PATCH v8 04/10] vgaarb: Move framebuffer detection to ADD_DEVICE path
Bjorn Helgaas
helgaas at kernel.org
Thu Jan 6 16:20:58 UTC 2022
On Thu, Jan 06, 2022 at 02:44:42PM +0800, Huacai Chen wrote:
> On Thu, Jan 6, 2022 at 8:07 AM Bjorn Helgaas <helgaas at kernel.org> wrote:
> > Previously we selected a device that owns the boot framebuffer as the
> > default device in vga_arb_select_default_device(). This was only done in
> > the vga_arb_device_init() subsys_initcall, so devices enumerated later,
> > e.g., by pcibios_init(), were not eligible.
> >
> > Fix this by moving the framebuffer device selection from
> > vga_arb_select_default_device() to vga_arbiter_add_pci_device(), which is
> > called after every PCI device is enumerated, either by the
> > vga_arb_device_init() subsys_initcall or as an ADD_DEVICE notifier.
> >
> > Note that if vga_arb_select_default_device() found a device owning the boot
> > framebuffer, it unconditionally set it to be the default VGA device, and no
> > subsequent device could replace it.
> >
> > Link: https://lore.kernel.org/r/20211015061512.2941859-7-chenhuacai@loongson.cn
> > Based-on-patch-by: Huacai Chen <chenhuacai at loongson.cn>
> > Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
> > Cc: Bruno Prémont <bonbons at linux-vserver.org>
> > ---
> > drivers/gpu/vga/vgaarb.c | 37 +++++++++++++++++--------------------
> > 1 file changed, 17 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
> > index b0ae0f177c6f..aefa4f406f7d 100644
> > --- a/drivers/gpu/vga/vgaarb.c
> > +++ b/drivers/gpu/vga/vgaarb.c
> > @@ -72,6 +72,7 @@ struct vga_device {
> > unsigned int io_norm_cnt; /* normal IO count */
> > unsigned int mem_norm_cnt; /* normal MEM count */
> > bool bridge_has_one_vga;
> > + bool is_framebuffer; /* BAR covers firmware framebuffer */
> > unsigned int (*set_decode)(struct pci_dev *pdev, bool decode);
> > };
> >
> > @@ -565,10 +566,9 @@ void vga_put(struct pci_dev *pdev, unsigned int rsrc)
> > }
> > EXPORT_SYMBOL(vga_put);
> >
> > -static void __init vga_select_framebuffer_device(struct pci_dev *pdev)
> > +static bool vga_is_framebuffer_device(struct pci_dev *pdev)
> > {
> > #if defined(CONFIG_X86) || defined(CONFIG_IA64)
> > - struct device *dev = &pdev->dev;
> > u64 base = screen_info.lfb_base;
> > u64 size = screen_info.lfb_size;
> > u64 limit;
> > @@ -583,15 +583,6 @@ static void __init vga_select_framebuffer_device(struct pci_dev *pdev)
> >
> > limit = base + size;
> >
> > - /*
> > - * Override vga_arbiter_add_pci_device()'s I/O based detection
> > - * as it may take the wrong device (e.g. on Apple system under
> > - * EFI).
> > - *
> > - * Select the device owning the boot framebuffer if there is
> > - * one.
> > - */
> > -
> > /* Does firmware framebuffer belong to us? */
> > for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
> > flags = pci_resource_flags(pdev, i);
> > @@ -608,13 +599,10 @@ static void __init vga_select_framebuffer_device(struct pci_dev *pdev)
> > if (base < start || limit >= end)
> > continue;
> >
> > - if (!vga_default_device())
> > - vgaarb_info(dev, "setting as boot device\n");
> > - else if (pdev != vga_default_device())
> > - vgaarb_info(dev, "overriding boot device\n");
> > - vga_set_default_device(pdev);
> > + return true;
> > }
> > #endif
> > + return false;
> > }
> >
> > static bool vga_arb_integrated_gpu(struct device *dev)
> > @@ -635,6 +623,7 @@ static bool vga_arb_integrated_gpu(struct device *dev)
> > static bool vga_is_boot_device(struct vga_device *vgadev)
> > {
> > struct vga_device *boot_vga = vgadev_find(vga_default_device());
> > + struct pci_dev *pdev = vgadev->pdev;
> >
> > /*
> > * We select the default VGA device in this order:
> > @@ -645,6 +634,18 @@ static bool vga_is_boot_device(struct vga_device *vgadev)
> > * Other device (see vga_arb_select_default_device())
> > */
> >
> > + /*
> > + * We always prefer a firmware framebuffer, so if we've already
> > + * found one, there's no need to consider vgadev.
> > + */
> > + if (boot_vga && boot_vga->is_framebuffer)
> > + return false;
> > +
> > + if (vga_is_framebuffer_device(pdev)) {
> > + vgadev->is_framebuffer = true;
> > + return true;
> > + }
> Maybe it is better to rename vga_is_framebuffer_device() to
> vga_is_firmware_device() and rename is_framebuffer to
> is_fw_framebuffer?
That's a great point, thanks!
The "framebuffer" term is way too generic. *All* VGA devices have a
framebuffer, so it adds no information. This is really about finding
the device that was used by firmware.
I renamed:
vga_is_framebuffer_device() -> vga_is_firmware_default()
vga_device.is_framebuffer -> vga_device.is_firmware_default
I updated my local branch and pushed it to:
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/?h=pci/vga
with head 0f4caffa1297 ("vgaarb: Replace full MIT license text with
SPDX identifier").
I don't maintain drivers/gpu/vga/vgaarb.c, so this branch is just for
reference. It'll ultimately be up to the DRM folks to handle this.
I'll wait for any other comments or testing reports before reposting.
> > /*
> > * A legacy VGA device has MEM and IO enabled and any bridges
> > * leading to it have PCI_BRIDGE_CTL_VGA enabled so the legacy
> > @@ -1531,10 +1532,6 @@ static void __init vga_arb_select_default_device(void)
> > struct pci_dev *pdev, *found = NULL;
> > struct vga_device *vgadev;
> >
> > - list_for_each_entry(vgadev, &vga_list, list) {
> > - vga_select_framebuffer_device(vgadev->pdev);
> > - }
> > -
> > if (!vga_default_device()) {
> > list_for_each_entry_reverse(vgadev, &vga_list, list) {
> > struct device *dev = &vgadev->pdev->dev;
> > --
> > 2.25.1
> >
More information about the dri-devel
mailing list