dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")
Neil Armstrong
narmstrong at baylibre.com
Fri Jan 14 13:56:29 UTC 2022
Hi,
On 14/01/2022 12:08, Biju Das wrote:
> Hi Neil,
>
>> Subject: Re: dw_hdmi is showing wrong colour after commit
>> 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts
>> callbacks")
>>
>> On 14/01/2022 09:29, Biju Das wrote:
>>> Hi Neil,
>>>
>>> + renesas-soc
>>>
>>>> Subject: Re: dw_hdmi is showing wrong colour after commit
>>>> 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts
>>>> callbacks")
>>>>
>>>> Hi,
>>>>
>>>> On 13/01/2022 21:01, Fabio Estevam wrote:
>>>>> Hi Biju,
>>>>>
>>>>> On Thu, Jan 13, 2022 at 2:45 PM Biju Das
>>>>> <biju.das.jz at bp.renesas.com>
>>>> wrote:
>>>>>>
>>>>>> Hi All,
>>>>>>
>>>>>> RZ/G2{H, M, N} SoC has dw_hdmi IP and it was working ok(colour)
>>>>>> till the commit
>>>>>> 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts
>>>> callbacks").
>>>>>>
>>>>>> After this patch, the screen becomes greenish(may be it is setting
>>>>>> it
>>>> into YUV format??).
>>>>>>
>>>>>> By checking the code, previously it used to call get_input_fmt
>>>>>> callback
>>>> and set colour as RGB24.
>>>>>>
>>>>>> After this commit, it calls get_output_fmt_callbck and returns 3
>>>>>> outputformats(YUV16, YUV24 and RGB24) And get_input_fmt callback, I
>>>>>> see
>>>> the outputformat as YUV16 instead of RGB24.
>>>>>>
>>>>>> Not sure, I am the only one seeing this issue with dw_HDMI driver.
>>>>
>>>> This patch was introduced to maintain the bridge color format
>>>> negotiation after using DRM_BRIDGE_ATTACH_NO_CONNECTOR, but it seems
>>>> it behaves incorrectly if the first bridge doesn't implement the
>>>> negotiation callbacks.
>>>>
>>>> Let me check the code to see how to fix that.
>>>
>>> Thanks for the information, I am happy to test the patch/fix.
>>>
>>> Cheers,
>>> Biju
>>>
>>>>
>>>>>
>>>>> I have tested linux-next 20220112 on a imx6q-sabresd board, which
>> shows:
>>>>>
>>>>> dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP
>>>>> (DWC HDMI 3D TX PHY)
>>>>>
>>>>> The colors are shown correctly here.
>>>>>
>>>>
>>>> The imx doesn't use DRM_BRIDGE_ATTACH_NO_CONNECTOR so the negotiation
>>>> fails and use the RGB fallback input & output format.
>>>>
>>>> Anyway thanks for testing
>>>>
>>>> Neil
>>
>> Can you test :
>>
>> ==><===============================
>> diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
>> index c96847fc0ebc..7019acd37716 100644
>> --- a/drivers/gpu/drm/drm_bridge.c
>> +++ b/drivers/gpu/drm/drm_bridge.c
>> @@ -955,7 +955,14 @@ drm_atomic_bridge_chain_select_bus_fmts(struct
>> drm_bridge *bridge,
>> last_bridge_state = drm_atomic_get_new_bridge_state(crtc_state-
>>> state,
>> last_bridge);
>>
>> - if (last_bridge->funcs->atomic_get_output_bus_fmts) {
>> + /*
>> + * Only negociate with real values if both end of the bridge chain
>> + * support negociation callbacks, otherwise you can end in a
>> situation
>> + * where the selected output format doesn't match with the first
>> bridge
>> + * output format.
>> + */
>> + if (bridge->funcs->atomic_get_input_bus_fmts &&
>> + last_bridge->funcs->atomic_get_output_bus_fmts) {
>> const struct drm_bridge_funcs *funcs = last_bridge->funcs;
>>
>> /*
>> @@ -980,7 +987,12 @@ drm_atomic_bridge_chain_select_bus_fmts(struct
>> drm_bridge *bridge,
>> if (!out_bus_fmts)
>> return -ENOMEM;
>>
>> - if (conn->display_info.num_bus_formats &&
>> + /*
>> + * If first bridge doesn't support negociation, use
>> MEDIA_BUS_FMT_FIXED
>> + * as a safe value for the whole bridge chain
>> + */
>> + if (bridge->funcs->atomic_get_input_bus_fmts &&
>> + conn->display_info.num_bus_formats &&
>> conn->display_info.bus_formats)
>> out_bus_fmts[0] = conn-
>>> display_info.bus_formats[0];
>> else
>> ==><===============================
>>
>> This should exclude your situation where the first bridge doesn't support
>> negociation.
>
> I have tested this fix with Linux next-20220114. Still I see colour issue.
>
> It is still negotiating and it is calling get_output_fmt_callbck
>
> [ 3.460155] ########dw_hdmi_bridge_atomic_get_output_bus_fmts MEDIA_BUS_FMT_UYVY8_1X16=0#########
> [ 3.460180] ########dw_hdmi_bridge_atomic_get_output_bus_fmts MEDIA_BUS_FMT_YUV8_1X24=1#########
> [ 3.460202] ########dw_hdmi_bridge_atomic_get_output_bus_fmts MEDIA_BUS_FMT_RGB888_1X24=2#########
>
> And In get_input_fmt callback, I See the outputformat as YUV16 instead of RGB24.
>
> [ 3.460319] ########dw_hdmi_bridge_atomic_get_input_bus_fmts MEDIA_BUS_FMT_UYVY8_1X16#########
> [ 3.473644] ########hdmi_video_sample MEDIA_BUS_FMT_UYVY8_1X16#########
OK, looking at rcar-du, the dw-hdmi bridge is directly connected to the encoder.
Let me figure that out, no sure I can find a clean solution except putting back RGB24 before YUV.
Anyway please test that:
==><===============================
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 54d8fdad395f..68f79094f648 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2589,45 +2589,44 @@ static u32 *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
}
/*
- * Order bus formats from 16bit to 8bit and from YUV422 to RGB
+ * Order bus formats from 16bit to 8bit and from RGB to YUV422
* if supported. In any case the default RGB888 format is added
*/
if (max_bpc >= 16 && info->bpc == 16) {
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
+
if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
output_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
-
- output_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
}
if (max_bpc >= 12 && info->bpc >= 12) {
- if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
- output_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
output_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
- output_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ output_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
}
if (max_bpc >= 10 && info->bpc >= 10) {
- if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
- output_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
output_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
- output_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ output_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
}
- if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
- output_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
+ output_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
output_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
- /* Default 8bit RGB fallback */
- output_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
+ if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+ output_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
*num_output_fmts = i;
==><===============================
Neil
>
> Regards,
> Biju
>
More information about the dri-devel
mailing list