[PATCH v10 00/13] Clean up "mediatek,larb"
Yong Wu
yong.wu at mediatek.com
Mon Jan 17 07:04:57 UTC 2022
MediaTek IOMMU block diagram always like below:
M4U
|
smi-common
|
-------------
| | ...
| |
larb1 larb2
| |
vdec venc
All the consumer connect with smi-larb, then connect with smi-common.
When the consumer works, it should enable the smi-larb's power which also
need enable the smi-common's power firstly.
Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.
After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.
Base on the media branch [1] and a jpeg dtbinding patchset[2] that already got
the necessary R-b.
[1] git://linuxtv.org/hverkuil/media_tree.git tags/br-v5.18d
[2] https://lore.kernel.org/linux-mediatek/20211206130425.184420-1-hsinyi@chromium.org/
Change notes:
v10: a) Rebase on the media tree. Respin the "media: mtk-vcodec:" patches.
b) Add Joerg's Ack for iommu patches.
v9: https://lore.kernel.org/linux-mediatek/20211112105509.12010-1-yong.wu@mediatek.com/
1) Add return -ENODEV when the dev is null.
2) Add more strict about the case that a iommu consume device use the ports in
different larbs. Don't allow this case.
3) Remove two codec interface: mtk_vcodec_release_enc/dec_pm since it only has one
line now.
v8: https://lore.kernel.org/linux-mediatek/20210929013719.25120-1-yong.wu@mediatek.com/
1) Rebase on v5.15-rc1.
2) Don't rebase the below mdp patchset that may still need more discuss.
https://lore.kernel.org/linux-mediatek/20210709022324.1607884-1-eizan@chromium.org/
3) Add Frank's Tested-by. Remove Dafna's Tested-by as he requested.
v7: https://lore.kernel.org/linux-mediatek/20210730025238.22456-1-yong.wu@mediatek.com/
1) Fix a arm32 boot fail issue. reported from Frank.
2) Add a return fail in the mtk drm. suggested by Dafna.
v6: https://lore.kernel.org/linux-mediatek/20210714025626.5528-1-yong.wu@mediatek.com/
1) rebase on v5.14-rc1.
2) Fix the issue commented in v5 from Dafna and Hsin-Yi.
3) Remove the patches about using pm_runtime_resume_and_get since they have
already been merged by other patches.
v5: https://lore.kernel.org/linux-mediatek/20210410091128.31823-1-yong.wu@mediatek.com/
1) Base v5.12-rc2.
2) Remove changing the mtk-iommu to module_platform_driver patch, It have already been a
independent patch.
v4: https://lore.kernel.org/linux-mediatek/1590826218-23653-1-git-send-email-yong.wu@mediatek.com/
base on v5.7-rc1.
1) Move drm PM patch before smi patchs.
2) Change builtin_platform_driver to module_platform_driver since we may need
build as module.
3) Rebase many patchset as above.
v3: https://lore.kernel.org/linux-iommu/1567503456-24725-1-git-send-email-yong.wu@mediatek.com/
1) rebase on v5.3-rc1 and the latest mt8183 patchset.
2) Use device_is_bound to check whether the driver is ready from Matthias.
3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
reason in the commit message[3/14].
4) Add a display patch[12/14] into this series. otherwise it may affect
display HW fastlogo even though it don't happen in mt8183.
v2: https://lore.kernel.org/linux-iommu/1560171313-28299-1-git-send-email-yong.wu@mediatek.com/
1) rebase on v5.2-rc1.
2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
4) Remove the shutdown callback in iommu.
v1: https://lore.kernel.org/linux-iommu/1546318276-18993-1-git-send-email-yong.wu@mediatek.com/
Yong Wu (12):
dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
iommu/mediatek-v1: Free the existed fwspec if the master dev already
has
iommu/mediatek: Return ENODEV if the device is NULL
iommu/mediatek: Add probe_defer for smi-larb
iommu/mediatek: Add device_link between the consumer and the larb
devices
media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
media: mtk-mdp: Get rid of mtk_smi_larb_get/put
drm/mediatek: Get rid of mtk_smi_larb_get/put
media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
memory: mtk-smi: Get rid of mtk_smi_larb_get/put
arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes
Yongqiang Niu (1):
drm/mediatek: Add pm runtime support for ovl and rdma
.../display/mediatek/mediatek,disp.txt | 9 ----
.../media/mediatek,vcodec-decoder.yaml | 7 ---
.../media/mediatek,vcodec-encoder.yaml | 8 ----
.../bindings/media/mediatek-jpeg-decoder.yaml | 9 ----
.../bindings/media/mediatek-jpeg-encoder.yaml | 9 ----
.../bindings/media/mediatek-mdp.txt | 8 ----
arch/arm/boot/dts/mt2701.dtsi | 2 -
arch/arm/boot/dts/mt7623n.dtsi | 5 ---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 16 -------
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 6 ---
drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 8 +++-
drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 9 +++-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 15 ++++---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 36 +--------------
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 -
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 5 +--
drivers/iommu/mtk_iommu.c | 34 ++++++++++++++
drivers/iommu/mtk_iommu_v1.c | 42 ++++++++++++++++-
.../media/platform/mtk-jpeg/mtk_jpeg_core.c | 45 +------------------
.../media/platform/mtk-jpeg/mtk_jpeg_core.h | 2 -
drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 40 -----------------
drivers/media/platform/mtk-mdp/mtk_mdp_comp.h | 2 -
drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 1 -
.../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 2 -
.../platform/mtk-vcodec/mtk_vcodec_dec_hw.c | 1 -
.../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 41 +++--------------
.../platform/mtk-vcodec/mtk_vcodec_drv.h | 3 --
.../platform/mtk-vcodec/mtk_vcodec_enc.c | 1 -
.../platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 2 -
.../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 45 +++----------------
drivers/memory/mtk-smi.c | 14 ------
include/soc/mediatek/smi.h | 20 ---------
32 files changed, 115 insertions(+), 333 deletions(-)
--
2.18.0
More information about the dri-devel
mailing list