[PATCH v2 6/6] drm/meson: add support for MIPI-DSI transceiver

[Jagan Teki]

On Thu, Jan 20, 2022 at 10:00 PM Neil Armstrong <narmstrong at baylibre.com> wrote:
>
> Hi,
>
> On 20/01/2022 15:24, Jagan Teki wrote:
> > On Thu, Jan 20, 2022 at 2:04 PM Neil Armstrong <narmstrong at baylibre.com> wrote:
> >>
> >> The Amlogic G12A/G12B/SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
> >> with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI
> >> Glue on other Amlogic SoCs.
> >>
> >> This adds support for the Glue managing the transceiver, mimicing the init flow provided
> >> by Amlogic to setup the ENCL encoder, the glue, the transceiver, the digital D-PHY and the
> >> Analog PHY in the proper way.
> >>
> >> An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the
> >> DW-MIPI-DSI transceiver.
> >>
> >> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> >> ---
> >>  drivers/gpu/drm/meson/Kconfig             |   7 +
> >>  drivers/gpu/drm/meson/Makefile            |   1 +
> >>  drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 357 ++++++++++++++++++++++
> >>  drivers/gpu/drm/meson/meson_dw_mipi_dsi.h | 160 ++++++++++
> >>  4 files changed, 525 insertions(+)
> >>  create mode 100644 drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
> >>  create mode 100644 drivers/gpu/drm/meson/meson_dw_mipi_dsi.h
> >>
> >> diff --git a/drivers/gpu/drm/meson/Kconfig b/drivers/gpu/drm/meson/Kconfig
> >> index 6c70fc3214af..71a1364b51e1 100644
> >> --- a/drivers/gpu/drm/meson/Kconfig
> >> +++ b/drivers/gpu/drm/meson/Kconfig
> >> @@ -17,3 +17,10 @@ config DRM_MESON_DW_HDMI
> >>         default y if DRM_MESON
> >>         select DRM_DW_HDMI
> >>         imply DRM_DW_HDMI_I2S_AUDIO
> >> +
> >> +config DRM_MESON_DW_MIPI_DSI
> >> +       tristate "MIPI DSI Synopsys Controller support for Amlogic Meson Display"
> >> +       depends on DRM_MESON
> >> +       default y if DRM_MESON
> >> +       select DRM_DW_MIPI_DSI
> >> +       select GENERIC_PHY_MIPI_DPHY
> >> diff --git a/drivers/gpu/drm/meson/Makefile b/drivers/gpu/drm/meson/Makefile
> >> index 833e18c20603..43071bdbd4b9 100644
> >> --- a/drivers/gpu/drm/meson/Makefile
> >> +++ b/drivers/gpu/drm/meson/Makefile
> >> @@ -6,3 +6,4 @@ meson-drm-y += meson_encoder_hdmi.o meson_encoder_dsi.o
> >>
> >>  obj-$(CONFIG_DRM_MESON) += meson-drm.o
> >>  obj-$(CONFIG_DRM_MESON_DW_HDMI) += meson_dw_hdmi.o
> >> +obj-$(CONFIG_DRM_MESON_DW_MIPI_DSI) += meson_dw_mipi_dsi.o
> >
> > Can the naming convention prefix with dw-mipi-dsi like other glue
> > drivers follow?
>
> Seems only rockchip names their glue like that:
>
> $ find drivers/gpu/drm/ -name "*dw*mipi*dsi*.c"
> drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>
> If you look at dw-hdmi it's even worse:
>
> $ find drivers/gpu/drm/ -name "*dw*hdmi*.c" | grep -v mod
> drivers/gpu/drm/meson/meson_dw_hdmi.c
> drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c
> drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
> drivers/gpu/drm/imx/dw_hdmi-imx.c
> drivers/gpu/drm/rcar-du/rcar_dw_hdmi.c

Look like there is no standard naming, thanks.

Jagan.