[RFC 21/28] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings

Rob Herring robh at kernel.org
Sat Jan 22 01:05:00 UTC 2022


On Wed, Jan 12, 2022 at 05:46:05PM +0000, Biju Das wrote:
> The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. It
> can operate in DSI mode, with up to four data lanes.
> 
> Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
> ---
>  .../bindings/display/bridge/renesas,dsi.yaml  | 143 ++++++++++++++++++
>  1 file changed, 143 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> new file mode 100644
> index 000000000000..8e56a9c53cc5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> @@ -0,0 +1,143 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas R-Car MIPI DSI Encoder
> +
> +maintainers:
> +  - Biju Das <biju.das.jz at bp.renesas.com>
> +
> +description: |
> +  This binding describes the MIPI DSI encoder embedded in the Renesas
> +  RZ/G2L family of SoC's. The encoder can operate in DSI mode with up
> +  to four data lanes.

Need a ref to dsi-controller.yaml.

> +
> +properties:
> +  compatible:
> +    enum:
> +      - renesas,r9a07g044-mipi-dsi    # for RZ/G2L
> +
> +  reg:
> +    items:
> +      - description: Link register
> +      - description: D-PHY register

D-PHY isn't a separate block?

> +
> +  clocks:
> +    items:
> +      - description: DSI D-PHY PLL multiplied clock
> +      - description: DSI D-PHY system clock
> +      - description: DSI AXI bus clock
> +      - description: DSI Register access clock
> +      - description: DSI Video clock
> +      - description: DSI D_PHY Escape mode Receive clock
> +
> +  clock-names:
> +    items:
> +      - const: pllclk
> +      - const: sysclk
> +      - const: aclk
> +      - const: pclk
> +      - const: vclk
> +      - const: lpclk
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: MIPI_DSI_CMN_RSTB
> +      - description: MIPI_DSI_ARESET_N
> +      - description: MIPI_DSI_PRESET_N
> +
> +  reset-names:
> +    items:
> +      - const: rst
> +      - const: arst
> +      - const: prst
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Parallel input port
> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description: DSI output port
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +    required:
> +      - port at 0
> +      - port at 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +  - reset-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> +
> +    dsi0: dsi at 10860000 {
> +        compatible = "renesas,r9a07g044-mipi-dsi";
> +        reg = <0x10860000 0x10000>,
> +              <0x10850000 0x10000>;
> +        power-domains = <&cpg>;
> +        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
> +                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
> +        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
> +        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
> +                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
> +                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
> +        reset-names = "rst", "arst", "prst";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port at 0 {
> +                reg = <0>;
> +                dsi0_in: endpoint {
> +                    remote-endpoint = <&du_out_dsi0>;
> +                };
> +            };
> +
> +            port at 1 {
> +                reg = <1>;
> +                dsi0_out: endpoint {
> +                    data-lanes = <1 2 3 4>;
> +                    remote-endpoint = <&adv7535_in>;
> +                };
> +            };
> +        };
> +    };
> +...
> -- 
> 2.17.1
> 
> 


More information about the dri-devel mailing list