[v3 2/3] drm/msm/dsi: Add dsi phy tuning configuration support

[Dmitry Baryshkov]

On 18/01/2022 23:38, Rajeev Nandan wrote:
> Add support for MSM DSI PHY tuning configuration. Current design is
> to support drive strength and drive level/amplitude tuning for
> 10nm PHY version, but this can be extended to other PHY versions.
> 
> Signed-off-by: Rajeev Nandan <quic_rajeevny at quicinc.com>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

> ---
> 
> Changes in v2:
>   - New.
>   - Split into generic code and 10nm-specific part (Dmitry Baryshkov)
> 
> Changes in v3:
>   - s/ops.tuning_cfg_init/ops.parse_dt_properties
>     To parse phy version specific DT properties (Dmitry Baryshkov)
>   - Address comments for phy tuning data structure (Dmitry Baryshkov)
> 
> 
>   drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 6 ++++++
>   drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 4 ++++
>   2 files changed, 10 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> index 8c65ef6..fcbca76 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> @@ -739,6 +739,12 @@ static int dsi_phy_driver_probe(struct platform_device *pdev)
>   		}
>   	}
>   
> +	if (phy->cfg->ops.parse_dt_properties) {
> +		ret = phy->cfg->ops.parse_dt_properties(phy);
> +		if (ret)
> +			goto fail;
> +	}
> +
>   	ret = dsi_phy_regulator_init(phy);
>   	if (ret)
>   		goto fail;
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> index b91303a..9e08081 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> @@ -25,6 +25,7 @@ struct msm_dsi_phy_ops {
>   	void (*save_pll_state)(struct msm_dsi_phy *phy);
>   	int (*restore_pll_state)(struct msm_dsi_phy *phy);
>   	bool (*set_continuous_clock)(struct msm_dsi_phy *phy, bool enable);
> +	int (*parse_dt_properties)(struct msm_dsi_phy *phy);
>   };
>   
>   struct msm_dsi_phy_cfg {
> @@ -81,6 +82,8 @@ struct msm_dsi_dphy_timing {
>   #define DSI_PIXEL_PLL_CLK		1
>   #define NUM_PROVIDED_CLKS		2
>   
> +#define DSI_LANE_MAX			5
> +
>   struct msm_dsi_phy {
>   	struct platform_device *pdev;
>   	void __iomem *base;
> @@ -98,6 +101,7 @@ struct msm_dsi_phy {
>   
>   	struct msm_dsi_dphy_timing timing;
>   	const struct msm_dsi_phy_cfg *cfg;
> +	void *tuning_cfg;
>   
>   	enum msm_dsi_phy_usecase usecase;
>   	bool regulator_ldo_mode;


-- 
With best wishes
Dmitry