[PATCH v2] drm/edid: Support type 7 timings
Jani Nikula
jani.nikula at linux.intel.com
Tue Jan 25 07:02:00 UTC 2022
On Sun, 23 Jan 2022, Yaroslav Bolyukin <iam at lach.pw> wrote:
> Per VESA DisplayID Standard v2.0: Type VII Timing – Detailed Timing Data
>
> Definitions were already provided as type I, but not used
>
> Signed-off-by: Yaroslav Bolyukin <iam at lach.pw>
Reviewed-by: Jani Nikula <jani.nikula at intel.com>
> ---
> drivers/gpu/drm/drm_edid.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 12893e7be..5f2ae5bfa 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -5405,7 +5405,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
> }
>
> static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *dev,
> - struct displayid_detailed_timings_1 *timings)
> + struct displayid_detailed_timings_1 *timings,
> + bool type_7)
> {
> struct drm_display_mode *mode;
> unsigned pixel_clock = (timings->pixel_clock[0] |
> @@ -5426,7 +5427,8 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d
> if (!mode)
> return NULL;
>
> - mode->clock = pixel_clock * 10;
> + /* resolution is kHz for type VII, and 10 kHz for type I */
> + mode->clock = type_7 ? pixel_clock : pixel_clock * 10;
> mode->hdisplay = hactive;
> mode->hsync_start = mode->hdisplay + hsync;
> mode->hsync_end = mode->hsync_start + hsync_width;
> @@ -5457,6 +5459,7 @@ static int add_displayid_detailed_1_modes(struct drm_connector *connector,
> int num_timings;
> struct drm_display_mode *newmode;
> int num_modes = 0;
> + bool type_7 = block->tag == DATA_BLOCK_2_TYPE_7_DETAILED_TIMING;
> /* blocks must be multiple of 20 bytes length */
> if (block->num_bytes % 20)
> return 0;
> @@ -5465,7 +5468,7 @@ static int add_displayid_detailed_1_modes(struct drm_connector *connector,
> for (i = 0; i < num_timings; i++) {
> struct displayid_detailed_timings_1 *timings = &det->timings[i];
>
> - newmode = drm_mode_displayid_detailed(connector->dev, timings);
> + newmode = drm_mode_displayid_detailed(connector->dev, timings, type_7);
> if (!newmode)
> continue;
>
> @@ -5484,7 +5487,8 @@ static int add_displayid_detailed_modes(struct drm_connector *connector,
>
> displayid_iter_edid_begin(edid, &iter);
> displayid_iter_for_each(block, &iter) {
> - if (block->tag == DATA_BLOCK_TYPE_1_DETAILED_TIMING)
> + if (block->tag == DATA_BLOCK_TYPE_1_DETAILED_TIMING ||
> + block->tag == DATA_BLOCK_2_TYPE_7_DETAILED_TIMING)
> num_modes += add_displayid_detailed_1_modes(connector, block);
> }
> displayid_iter_end(&iter);
>
> base-commit: 99613159ad749543621da8238acf1a122880144e
--
Jani Nikula, Intel Open Source Graphics Center
More information about the dri-devel
mailing list