[PATCH 3/5] drm/simpledrm: Request memory region in driver

[Thomas Zimmermann]

Requesting the framebuffer memory in simpledrm marks the memory
range as busy. This used to be done by the firmware sysfb code,
but the driver is the correct place.

v2:
	* use I/O memory if request_mem_region() fails (Jocelyn)

Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Reviewed-by: Javier Martinez Canillas <javierm at redhat.com>
---
 drivers/gpu/drm/tiny/simpledrm.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
index 04146da2d1d8..d191e87a37b5 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -526,21 +526,33 @@ static int simpledrm_device_init_mm(struct simpledrm_device *sdev)
 {
 	struct drm_device *dev = &sdev->dev;
 	struct platform_device *pdev = sdev->pdev;
-	struct resource *mem;
+	struct resource *res, *mem;
 	void __iomem *screen_base;
 	int ret;
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem)
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
 		return -EINVAL;
 
-	ret = devm_aperture_acquire_from_firmware(dev, mem->start, resource_size(mem));
+	ret = devm_aperture_acquire_from_firmware(dev, res->start, resource_size(res));
 	if (ret) {
 		drm_err(dev, "could not acquire memory range %pr: error %d\n",
-			mem, ret);
+			res, ret);
 		return ret;
 	}
 
+	mem = devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
+				      sdev->dev.driver->name);
+	if (!mem) {
+		/*
+		 * We cannot make this fatal. Sometimes this comes from magic
+		 * spaces our resource handlers simply don't know about. Use
+		 * the I/O-memory resource as-is and try to map that instead.
+		 */
+		drm_warn(dev, "could not acquire memory region %pr\n", res);
+		mem = res;
+	}
+
 	screen_base = devm_ioremap_wc(&pdev->dev, mem->start,
 				      resource_size(mem));
 	if (!screen_base)
-- 
2.34.1