[PATCH v8 04/10] vgaarb: Move framebuffer detection to ADD_DEVICE path
Huacai Chen
chenhuacai at gmail.com
Wed Jan 26 02:25:14 UTC 2022
On Tue, Jan 25, 2022 at 11:39 PM Bjorn Helgaas <helgaas at kernel.org> wrote:
>
> [+cc Maarten, Maxime, Thomas; beginning of thread:
> https://lore.kernel.org/r/20220106000658.243509-1-helgaas@kernel.org]
>
> On Tue, Jan 25, 2022 at 10:51:15AM +0800, Huacai Chen wrote:
> > Hi, Bjorn,
> >
> > Why this series still missing in 5.17-rc1? :(
>
> 1) It was posted late in the cycle (Jan 6, when the merge window
> opened Jan 9), so it was too late to expect a significant change like
> this to be merged for v5.17. Right now is a good time to consider it
> again so it would some time in -next.
>
> 2) As of now, this code is still in drivers/gpu, and I don't maintain
> that area. It's up to the DRM folks, who are all cc'd here.
>
> I would like to move this from drivers/gpu to drivers/pci, but that
> requires a little more work to resolve the initcall ordering problem
> with respect to vga_arb_device_init() and misc_init() [1].
Hmm, to me, keep it in drivers/gpu is just OK.
Huacai
>
> Bjorn
>
> [1] https://lore.kernel.org/linux-pci/CAAhV-H7FhAjM-Ha42Z1dLrE4PvC9frfyeU27KHWcyWKkMftEsA@mail.gmail.com/
>
> > On Fri, Jan 7, 2022 at 12:21 AM Bjorn Helgaas <helgaas at kernel.org> wrote:
> > >
> > > On Thu, Jan 06, 2022 at 02:44:42PM +0800, Huacai Chen wrote:
> > > > On Thu, Jan 6, 2022 at 8:07 AM Bjorn Helgaas <helgaas at kernel.org> wrote:
> > > > > Previously we selected a device that owns the boot framebuffer as the
> > > > > default device in vga_arb_select_default_device(). This was only done in
> > > > > the vga_arb_device_init() subsys_initcall, so devices enumerated later,
> > > > > e.g., by pcibios_init(), were not eligible.
> > > > >
> > > > > Fix this by moving the framebuffer device selection from
> > > > > vga_arb_select_default_device() to vga_arbiter_add_pci_device(), which is
> > > > > called after every PCI device is enumerated, either by the
> > > > > vga_arb_device_init() subsys_initcall or as an ADD_DEVICE notifier.
> > > > >
> > > > > Note that if vga_arb_select_default_device() found a device owning the boot
> > > > > framebuffer, it unconditionally set it to be the default VGA device, and no
> > > > > subsequent device could replace it.
> > > > >
> > > > > Link: https://lore.kernel.org/r/20211015061512.2941859-7-chenhuacai@loongson.cn
> > > > > Based-on-patch-by: Huacai Chen <chenhuacai at loongson.cn>
> > > > > Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
> > > > > Cc: Bruno Prémont <bonbons at linux-vserver.org>
> > > > > ---
> > > > > drivers/gpu/vga/vgaarb.c | 37 +++++++++++++++++--------------------
> > > > > 1 file changed, 17 insertions(+), 20 deletions(-)
> > > > >
> > > > > diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
> > > > > index b0ae0f177c6f..aefa4f406f7d 100644
> > > > > --- a/drivers/gpu/vga/vgaarb.c
> > > > > +++ b/drivers/gpu/vga/vgaarb.c
> > > > > @@ -72,6 +72,7 @@ struct vga_device {
> > > > > unsigned int io_norm_cnt; /* normal IO count */
> > > > > unsigned int mem_norm_cnt; /* normal MEM count */
> > > > > bool bridge_has_one_vga;
> > > > > + bool is_framebuffer; /* BAR covers firmware framebuffer */
> > > > > unsigned int (*set_decode)(struct pci_dev *pdev, bool decode);
> > > > > };
> > > > >
> > > > > @@ -565,10 +566,9 @@ void vga_put(struct pci_dev *pdev, unsigned int rsrc)
> > > > > }
> > > > > EXPORT_SYMBOL(vga_put);
> > > > >
> > > > > -static void __init vga_select_framebuffer_device(struct pci_dev *pdev)
> > > > > +static bool vga_is_framebuffer_device(struct pci_dev *pdev)
> > > > > {
> > > > > #if defined(CONFIG_X86) || defined(CONFIG_IA64)
> > > > > - struct device *dev = &pdev->dev;
> > > > > u64 base = screen_info.lfb_base;
> > > > > u64 size = screen_info.lfb_size;
> > > > > u64 limit;
> > > > > @@ -583,15 +583,6 @@ static void __init vga_select_framebuffer_device(struct pci_dev *pdev)
> > > > >
> > > > > limit = base + size;
> > > > >
> > > > > - /*
> > > > > - * Override vga_arbiter_add_pci_device()'s I/O based detection
> > > > > - * as it may take the wrong device (e.g. on Apple system under
> > > > > - * EFI).
> > > > > - *
> > > > > - * Select the device owning the boot framebuffer if there is
> > > > > - * one.
> > > > > - */
> > > > > -
> > > > > /* Does firmware framebuffer belong to us? */
> > > > > for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
> > > > > flags = pci_resource_flags(pdev, i);
> > > > > @@ -608,13 +599,10 @@ static void __init vga_select_framebuffer_device(struct pci_dev *pdev)
> > > > > if (base < start || limit >= end)
> > > > > continue;
> > > > >
> > > > > - if (!vga_default_device())
> > > > > - vgaarb_info(dev, "setting as boot device\n");
> > > > > - else if (pdev != vga_default_device())
> > > > > - vgaarb_info(dev, "overriding boot device\n");
> > > > > - vga_set_default_device(pdev);
> > > > > + return true;
> > > > > }
> > > > > #endif
> > > > > + return false;
> > > > > }
> > > > >
> > > > > static bool vga_arb_integrated_gpu(struct device *dev)
> > > > > @@ -635,6 +623,7 @@ static bool vga_arb_integrated_gpu(struct device *dev)
> > > > > static bool vga_is_boot_device(struct vga_device *vgadev)
> > > > > {
> > > > > struct vga_device *boot_vga = vgadev_find(vga_default_device());
> > > > > + struct pci_dev *pdev = vgadev->pdev;
> > > > >
> > > > > /*
> > > > > * We select the default VGA device in this order:
> > > > > @@ -645,6 +634,18 @@ static bool vga_is_boot_device(struct vga_device *vgadev)
> > > > > * Other device (see vga_arb_select_default_device())
> > > > > */
> > > > >
> > > > > + /*
> > > > > + * We always prefer a firmware framebuffer, so if we've already
> > > > > + * found one, there's no need to consider vgadev.
> > > > > + */
> > > > > + if (boot_vga && boot_vga->is_framebuffer)
> > > > > + return false;
> > > > > +
> > > > > + if (vga_is_framebuffer_device(pdev)) {
> > > > > + vgadev->is_framebuffer = true;
> > > > > + return true;
> > > > > + }
> > > > Maybe it is better to rename vga_is_framebuffer_device() to
> > > > vga_is_firmware_device() and rename is_framebuffer to
> > > > is_fw_framebuffer?
> > >
> > > That's a great point, thanks!
> > >
> > > The "framebuffer" term is way too generic. *All* VGA devices have a
> > > framebuffer, so it adds no information. This is really about finding
> > > the device that was used by firmware.
> > >
> > > I renamed:
> > >
> > > vga_is_framebuffer_device() -> vga_is_firmware_default()
> > > vga_device.is_framebuffer -> vga_device.is_firmware_default
> > >
> > > I updated my local branch and pushed it to:
> > > https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/?h=pci/vga
> > > with head 0f4caffa1297 ("vgaarb: Replace full MIT license text with
> > > SPDX identifier").
> > >
> > > I don't maintain drivers/gpu/vga/vgaarb.c, so this branch is just for
> > > reference. It'll ultimately be up to the DRM folks to handle this.
> > >
> > > I'll wait for any other comments or testing reports before reposting.
> > >
> > > > > /*
> > > > > * A legacy VGA device has MEM and IO enabled and any bridges
> > > > > * leading to it have PCI_BRIDGE_CTL_VGA enabled so the legacy
> > > > > @@ -1531,10 +1532,6 @@ static void __init vga_arb_select_default_device(void)
> > > > > struct pci_dev *pdev, *found = NULL;
> > > > > struct vga_device *vgadev;
> > > > >
> > > > > - list_for_each_entry(vgadev, &vga_list, list) {
> > > > > - vga_select_framebuffer_device(vgadev->pdev);
> > > > > - }
> > > > > -
> > > > > if (!vga_default_device()) {
> > > > > list_for_each_entry_reverse(vgadev, &vga_list, list) {
> > > > > struct device *dev = &vgadev->pdev->dev;
> > > > > --
> > > > > 2.25.1
> > > > >
More information about the dri-devel
mailing list