[PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Robin Murphy]

On 2022-01-26 16:04, Peter Geis wrote:
> On Wed, Jan 26, 2022 at 9:58 AM Sascha Hauer <s.hauer at pengutronix.de> wrote:
>>
>> Add support for the HDMI port found on RK3568.
>>
>> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk356x.dtsi | 37 +++++++++++++++++++++++-
>>   1 file changed, 36 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> index 4008bd666d01..e38fb223e9b8 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
>> @@ -10,7 +10,6 @@
>>   #include <dt-bindings/pinctrl/rockchip.h>
>>   #include <dt-bindings/power/rk3568-power.h>
>>   #include <dt-bindings/soc/rockchip,boot-mode.h>
>> -#include <dt-bindings/soc/rockchip,vop2.h>
>>   #include <dt-bindings/thermal/thermal.h>
>>
>>   / {
>> @@ -502,6 +501,42 @@ vop_mmu: iommu at fe043e00 {
>>                  status = "disabled";
>>          };
>>
>> +       hdmi: hdmi at fe0a0000 {
>> +               compatible = "rockchip,rk3568-dw-hdmi";
>> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
>> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>> +               clocks = <&cru PCLK_HDMI_HOST>,
>> +                        <&cru CLK_HDMI_SFR>,
>> +                        <&cru CLK_HDMI_CEC>,
>> +                        <&pmucru CLK_HDMI_REF>,
>> +                        <&cru HCLK_VOP>;
>> +               clock-names = "iahb", "isfr", "cec", "ref", "hclk";
>> +               pinctrl-names = "default";
>> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> 
> I looked into CEC support here, and it seems that it does work with one change.
> Please add the two following lines to your patch:
> assigned-clocks = <&cru CLK_HDMI_CEC>;
> assigned-clock-rates = <32768>;
> 
> The issue is the clk_rtc32k_frac clock that feeds clk_rtc_32k which
> feeds clk_hdmi_cec is 24mhz at boot, which is too high for CEC to
> function.

Wouldn't it make far more sense to just stick a suitable clk_set_rate() 
call in the driver? AFAICS it's already explicitly aware of the CEC clock.

Robin.

>> +               power-domains = <&power RK3568_PD_VO>;
>> +               reg-io-width = <4>;
>> +               rockchip,grf = <&grf>;
>> +               #sound-dai-cells = <0>;
>> +               status = "disabled";
>> +
>> +               ports {
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +
>> +                       hdmi_in: port at 0 {
>> +                               reg = <0>;
>> +                               #address-cells = <1>;
>> +                               #size-cells = <0>;
>> +                       };
>> +
>> +                       hdmi_out: port at 1 {
>> +                               reg = <1>;
>> +                               #address-cells = <1>;
>> +                               #size-cells = <0>;
>> +                       };
>> +               };
>> +       };
>> +
>>          qos_gpu: qos at fe128000 {
>>                  compatible = "rockchip,rk3568-qos", "syscon";
>>                  reg = <0x0 0xfe128000 0x0 0x20>;
>> --
>> 2.30.2
>>
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip