[PATCH v12 2/9] drm/ingenic: Add support for JZ4780 and HDMI output
H. Nikolaus Schaller
hns at goldelico.com
Mon Jan 31 12:26:48 UTC 2022
From: Paul Boddie <paul at boddie.org.uk>
Add support for the LCD controller present on JZ4780 SoCs.
This SoC uses 8-byte descriptors which extend the current
4-byte descriptors used for other Ingenic SoCs.
Tested on MIPS Creator CI20 board.
Signed-off-by: Paul Boddie <paul at boddie.org.uk>
Signed-off-by: Ezequiel Garcia <ezequiel at collabora.com>
Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 61 ++++++++++++++++++++++-
drivers/gpu/drm/ingenic/ingenic-drm.h | 38 ++++++++++++++
2 files changed, 98 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index 9c60fc4605e4b..ccdb9eedd9247 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -6,6 +6,7 @@
#include "ingenic-drm.h"
+#include <linux/bitfield.h>
#include <linux/component.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
@@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
u32 addr;
u32 id;
u32 cmd;
+ /* extended hw descriptor for jz4780 */
+ u32 offsize;
+ u32 pagewidth;
+ u32 cpos;
+ u32 dessize;
} __aligned(16);
struct ingenic_dma_hwdescs {
@@ -59,7 +65,9 @@ struct ingenic_dma_hwdescs {
struct jz_soc_info {
bool needs_dev_clk;
bool has_osd;
+ bool has_alpha;
bool map_noncoherent;
+ bool use_extended_hwdesc;
unsigned int max_width, max_height;
const u32 *formats_f0, *formats_f1;
unsigned int num_formats_f0, num_formats_f1;
@@ -446,6 +454,9 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
if (!crtc)
return 0;
+ if (plane == &priv->f0)
+ return -EINVAL;
+
crtc_state = drm_atomic_get_existing_crtc_state(state,
crtc);
if (WARN_ON(!crtc_state))
@@ -662,6 +673,33 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
hwdesc->next = dma_hwdesc_addr(priv, next_id);
+ if (priv->soc_info->use_extended_hwdesc) {
+ hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
+
+ /* Extended 8-byte descriptor */
+ hwdesc->cpos = 0;
+ hwdesc->offsize = 0;
+ hwdesc->pagewidth = 0;
+
+ switch (newstate->fb->format->format) {
+ case DRM_FORMAT_XRGB1555:
+ hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
+ fallthrough;
+ case DRM_FORMAT_RGB565:
+ hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
+ break;
+ case DRM_FORMAT_XRGB8888:
+ hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
+ break;
+ }
+ hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
+ JZ_LCD_CPOS_COEFFICIENT_OFFSET);
+ hwdesc->dessize =
+ (0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
+ FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
+ FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
+ }
+
if (drm_atomic_crtc_needs_modeset(crtc_state)) {
fourcc = newstate->fb->format->format;
@@ -693,6 +731,9 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
| JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
}
+ if (priv->soc_info->use_extended_hwdesc)
+ cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
+
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
@@ -1015,6 +1056,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
long parent_rate;
unsigned int i, clone_mask = 0;
int ret, irq;
+ u32 osdc = 0;
soc_info = of_device_get_match_data(dev);
if (!soc_info) {
@@ -1272,7 +1314,10 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
/* Enable OSD if available */
if (soc_info->has_osd)
- regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
+ osdc |= JZ_LCD_OSDC_OSDEN;
+ if (soc_info->has_alpha)
+ osdc |= JZ_LCD_OSDC_ALPHAEN;
+ regmap_write(priv->map, JZ_REG_LCD_OSDC, osdc);
mutex_init(&priv->clk_mutex);
priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
@@ -1468,10 +1513,24 @@ static const struct jz_soc_info jz4770_soc_info = {
.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
};
+static const struct jz_soc_info jz4780_soc_info = {
+ .needs_dev_clk = true,
+ .has_osd = true,
+ .has_alpha = true,
+ .use_extended_hwdesc = true,
+ .max_width = 4096,
+ .max_height = 2048,
+ .formats_f1 = jz4770_formats_f1,
+ .num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
+ .formats_f0 = jz4770_formats_f0,
+ .num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
+};
+
static const struct of_device_id ingenic_drm_of_match[] = {
{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
+ { .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
index 22654ac1dde1c..cb1d09b625881 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm.h
+++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
@@ -44,8 +44,11 @@
#define JZ_REG_LCD_XYP1 0x124
#define JZ_REG_LCD_SIZE0 0x128
#define JZ_REG_LCD_SIZE1 0x12c
+#define JZ_REG_LCD_PCFG 0x2c0
#define JZ_LCD_CFG_SLCD BIT(31)
+#define JZ_LCD_CFG_DESCRIPTOR_8 BIT(28)
+#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN BIT(25)
#define JZ_LCD_CFG_PS_DISABLE BIT(23)
#define JZ_LCD_CFG_CLS_DISABLE BIT(22)
#define JZ_LCD_CFG_SPL_DISABLE BIT(21)
@@ -63,6 +66,7 @@
#define JZ_LCD_CFG_DE_ACTIVE_LOW BIT(9)
#define JZ_LCD_CFG_VSYNC_ACTIVE_LOW BIT(8)
#define JZ_LCD_CFG_18_BIT BIT(7)
+#define JZ_LCD_CFG_24_BIT BIT(6)
#define JZ_LCD_CFG_PDW (BIT(5) | BIT(4))
#define JZ_LCD_CFG_MODE_GENERIC_16BIT 0
@@ -132,6 +136,7 @@
#define JZ_LCD_CMD_SOF_IRQ BIT(31)
#define JZ_LCD_CMD_EOF_IRQ BIT(30)
#define JZ_LCD_CMD_ENABLE_PAL BIT(28)
+#define JZ_LCD_CMD_FRM_ENABLE BIT(26)
#define JZ_LCD_SYNC_MASK 0x3ff
@@ -153,6 +158,7 @@
#define JZ_LCD_RGBC_EVEN_BGR (0x5 << 0)
#define JZ_LCD_OSDC_OSDEN BIT(0)
+#define JZ_LCD_OSDC_ALPHAEN BIT(2)
#define JZ_LCD_OSDC_F0EN BIT(3)
#define JZ_LCD_OSDC_F1EN BIT(4)
@@ -176,6 +182,38 @@
#define JZ_LCD_SIZE01_WIDTH_LSB 0
#define JZ_LCD_SIZE01_HEIGHT_LSB 16
+#define JZ_LCD_DESSIZE_ALPHA_OFFSET 24
+#define JZ_LCD_DESSIZE_HEIGHT_MASK GENMASK(23, 12)
+#define JZ_LCD_DESSIZE_WIDTH_MASK GENMASK(11, 0)
+
+#define JZ_LCD_CPOS_BPP_15_16 (4 << 27)
+#define JZ_LCD_CPOS_BPP_18_24 (5 << 27)
+#define JZ_LCD_CPOS_BPP_30 (7 << 27)
+#define JZ_LCD_CPOS_RGB555 BIT(30)
+#define JZ_LCD_CPOS_PREMULTIPLY_LCD BIT(26)
+#define JZ_LCD_CPOS_COEFFICIENT_OFFSET 24
+#define JZ_LCD_CPOS_COEFFICIENT_0 0
+#define JZ_LCD_CPOS_COEFFICIENT_1 1
+#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1 2
+#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1 3
+
+#define JZ_LCD_RGBC_RGB_PADDING BIT(15)
+#define JZ_LCD_RGBC_RGB_PADDING_FIRST BIT(14)
+#define JZ_LCD_RGBC_422 BIT(8)
+#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE BIT(7)
+
+#define JZ_LCD_PCFG_PRI_MODE BIT(31)
+#define JZ_LCD_PCFG_HP_BST_4 (0 << 28)
+#define JZ_LCD_PCFG_HP_BST_8 (1 << 28)
+#define JZ_LCD_PCFG_HP_BST_16 (2 << 28)
+#define JZ_LCD_PCFG_HP_BST_32 (3 << 28)
+#define JZ_LCD_PCFG_HP_BST_64 (4 << 28)
+#define JZ_LCD_PCFG_HP_BST_16_CONT (5 << 28)
+#define JZ_LCD_PCFG_HP_BST_DISABLE (7 << 28)
+#define JZ_LCD_PCFG_THRESHOLD2_OFFSET 18
+#define JZ_LCD_PCFG_THRESHOLD1_OFFSET 9
+#define JZ_LCD_PCFG_THRESHOLD0_OFFSET 0
+
struct device;
struct drm_plane;
struct drm_plane_state;
--
2.33.0
More information about the dri-devel
mailing list