[PATCH 3/3] drm/bridge: fsl-ldb: Drop DE signal polarity inversion

Liu Ying victor.liu at nxp.com
Fri Jul 1 06:56:34 UTC 2022


It's unnecessary to invert input data enable signal polarity
according to the output one. Let's drop the inversion.
Since ->atomic_check() does nothing more than the inversion,
it can be dropped entirely as well.

Without this patch, 'koe,tx26d202vm0bwa' LVDS panel connected
with i.MX8MP EVK board does not show any data on screen.

Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge")
Cc: Andrzej Hajda <andrzej.hajda at intel.com>
Cc: Neil Armstrong <narmstrong at baylibre.com>
Cc: Robert Foss <robert.foss at linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
Cc: Jonas Karlman <jonas at kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec at gmail.com>
Cc: David Airlie <airlied at linux.ie>
Cc: Daniel Vetter <daniel at ffwll.ch>
Cc: Sam Ravnborg <sam at ravnborg.org>
Cc: Marek Vasut <marex at denx.de>
Cc: NXP Linux Team <linux-imx at nxp.com>
Signed-off-by: Liu Ying <victor.liu at nxp.com>
---
 drivers/gpu/drm/bridge/fsl-ldb.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/gpu/drm/bridge/fsl-ldb.c b/drivers/gpu/drm/bridge/fsl-ldb.c
index d4f005eef6f6..4b503c544256 100644
--- a/drivers/gpu/drm/bridge/fsl-ldb.c
+++ b/drivers/gpu/drm/bridge/fsl-ldb.c
@@ -74,22 +74,6 @@ static int fsl_ldb_attach(struct drm_bridge *bridge,
 				 bridge, flags);
 }
 
-static int fsl_ldb_atomic_check(struct drm_bridge *bridge,
-				struct drm_bridge_state *bridge_state,
-				struct drm_crtc_state *crtc_state,
-				struct drm_connector_state *conn_state)
-{
-	/* Invert DE signal polarity. */
-	bridge_state->input_bus_cfg.flags &= ~(DRM_BUS_FLAG_DE_LOW |
-					       DRM_BUS_FLAG_DE_HIGH);
-	if (bridge_state->output_bus_cfg.flags & DRM_BUS_FLAG_DE_LOW)
-		bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_HIGH;
-	else if (bridge_state->output_bus_cfg.flags & DRM_BUS_FLAG_DE_HIGH)
-		bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_LOW;
-
-	return 0;
-}
-
 static void fsl_ldb_atomic_enable(struct drm_bridge *bridge,
 				  struct drm_bridge_state *old_bridge_state)
 {
@@ -241,7 +225,6 @@ fsl_ldb_mode_valid(struct drm_bridge *bridge,
 
 static const struct drm_bridge_funcs funcs = {
 	.attach = fsl_ldb_attach,
-	.atomic_check = fsl_ldb_atomic_check,
 	.atomic_enable = fsl_ldb_atomic_enable,
 	.atomic_disable = fsl_ldb_atomic_disable,
 	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
-- 
2.25.1



More information about the dri-devel mailing list