[PATCH v13 01/10] dt-bindings: mediatek,dp: Add Display Port binding

[Rob Herring]

On Fri, Jul 01, 2022 at 02:27:59PM +0800, Bo-Chen Chen wrote:
> From: Markus Schneider-Pargmann <msp at baylibre.com>
> 
> This controller is present on several mediatek hardware. Currently
> mt8195 and mt8395 have this controller without a functional difference,
> so only one compatible field is added.
> 
> The controller can have two forms, as a normal display port and as an
> embedded display port.

I'm sure you answered this before, but I'll keep asking until the 
information is contained within this patch. Otherwise, I won't remember. 
Is there a h/w difference in the 2 blocks? Different registers? Why 
can't you just look at what the output is connected to?

> 
> Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> Signed-off-by: Bo-Chen Chen <rex-bc.chen at mediatek.com>
> ---
>  .../display/mediatek/mediatek,dp.yaml         | 108 ++++++++++++++++++
>  1 file changed, 108 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
> new file mode 100644
> index 000000000000..26047fc65e7d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek Display Port Controller
> +
> +maintainers:
> +  - Chun-Kuang Hu <chunkuang.hu at kernel.org>
> +  - Jitao shi <jitao.shi at mediatek.com>
> +
> +description: |
> +  Device tree bindings for the MediaTek display port and
> +  embedded display port controller present on some MediaTek SoCs.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - mediatek,mt8195-dp-tx
> +      - mediatek,mt8195-edp-tx
> +
> +  reg:
> +    maxItems: 1
> +
> +  nvmem-cells:
> +    maxItems: 1
> +    description: efuse data for display port calibration
> +
> +  nvmem-cell-names:
> +    const: dp_calibration_data
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Input endpoint of the controller, usually dp_intf
> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Output endpoint of the controller
> +
> +    required:
> +      - port at 0
> +      - port at 1
> +
> +  data-lanes:

This is not where data-lanes belongs. It goes in port at 1 endpoint. Look 
at other users.

> +    $ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes

Generally, not how references look in DT bindings.

> +    description: |
> +      number of lanes supported by the hardware.
> +      The possible values:
> +      0       - For 1 lane enabled in IP.
> +      0 1     - For 2 lanes enabled in IP.
> +      0 1 2 3 - For 4 lanes enabled in IP.
> +    minItems: 1
> +    maxItems: 4
> +
> +  max-linkrate-mhz:
> +    enum: [ 1620, 2700, 5400, 8100 ]
> +    description: maximum link rate supported by the hardware.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - ports
> +  - data-lanes
> +  - max-linkrate-mhz
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/mt8195-power.h>
> +    dp_tx at 1c600000 {
> +        compatible = "mediatek,mt8195-dp-tx";
> +        reg = <0x1c600000 0x8000>;
> +        power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
> +        interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
> +        data-lanes = <0 1 2 3>;
> +        max-linkrate-mhz = <8100>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port at 0 {
> +                reg = <0>;
> +                edp_in: endpoint {
> +                    remote-endpoint = <&dp_intf0_out>;
> +                };
> +            };
> +            port at 1 {
> +                reg = <1>;
> +                edp_out: endpoint {
> +                    remote-endpoint = <&panel_in>;
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.18.0
> 
>