[PATCH v15 05/16] drm/mediatek: dpi: Add support for quantization range
CK Hu
ck.hu at mediatek.com
Tue Jul 5 03:49:33 UTC 2022
Hi, Bo-Chen:
On Fri, 2022-07-01 at 11:58 +0800, Bo-Chen Chen wrote:
> For RGB colorimetry, CTA-861 support both limited and full range data
> when receiving video with RGB color space.
> We use drm_default_rgb_quant_range() to determine the correct
> setting.
Applied to mediatek-drm-next [1], thanks.
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next
Regards,
CK
>
> Signed-off-by: Bo-Chen Chen <rex-bc.chen at mediatek.com>
> Reviewed-by: CK Hu <ck.hu at mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 34 ++++++++++++++++++--------
> ----
> 1 file changed, 21 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 3473ee18ad97..0855bbdfe4e1 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -238,16 +238,30 @@ static void mtk_dpi_config_fb_size(struct
> mtk_dpi *dpi, u32 width, u32 height)
> mtk_dpi_mask(dpi, DPI_SIZE, height << VSIZE, VSIZE_MASK);
> }
>
> -static void mtk_dpi_config_channel_limit(struct mtk_dpi *dpi,
> - struct mtk_dpi_yc_limit
> *limit)
> +static void mtk_dpi_config_channel_limit(struct mtk_dpi *dpi)
> {
> - mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit->y_bottom << Y_LIMINT_BOT,
> + struct mtk_dpi_yc_limit limit;
> +
> + if (drm_default_rgb_quant_range(&dpi->mode) ==
> + HDMI_QUANTIZATION_RANGE_LIMITED) {
> + limit.y_bottom = 0x10;
> + limit.y_top = 0xfe0;
> + limit.c_bottom = 0x10;
> + limit.c_top = 0xfe0;
> + } else {
> + limit.y_bottom = 0;
> + limit.y_top = 0xfff;
> + limit.c_bottom = 0;
> + limit.c_top = 0xfff;
> + }
> +
> + mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit.y_bottom << Y_LIMINT_BOT,
> Y_LIMINT_BOT_MASK);
> - mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit->y_top << Y_LIMINT_TOP,
> + mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit.y_top << Y_LIMINT_TOP,
> Y_LIMINT_TOP_MASK);
> - mtk_dpi_mask(dpi, DPI_C_LIMIT, limit->c_bottom << C_LIMIT_BOT,
> + mtk_dpi_mask(dpi, DPI_C_LIMIT, limit.c_bottom << C_LIMIT_BOT,
> C_LIMIT_BOT_MASK);
> - mtk_dpi_mask(dpi, DPI_C_LIMIT, limit->c_top << C_LIMIT_TOP,
> + mtk_dpi_mask(dpi, DPI_C_LIMIT, limit.c_top << C_LIMIT_TOP,
> C_LIMIT_TOP_MASK);
> }
>
> @@ -439,7 +453,6 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
> static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
> struct drm_display_mode *mode)
> {
> - struct mtk_dpi_yc_limit limit;
> struct mtk_dpi_polarities dpi_pol;
> struct mtk_dpi_sync_param hsync;
> struct mtk_dpi_sync_param vsync_lodd = { 0 };
> @@ -474,11 +487,6 @@ static int mtk_dpi_set_display_mode(struct
> mtk_dpi *dpi,
> dev_dbg(dpi->dev, "Got PLL %lu Hz, pixel clock %lu Hz\n",
> pll_rate, vm.pixelclock);
>
> - limit.c_bottom = 0x0010;
> - limit.c_top = 0x0FE0;
> - limit.y_bottom = 0x0010;
> - limit.y_top = 0x0FE0;
> -
> dpi_pol.ck_pol = MTK_DPI_POLARITY_FALLING;
> dpi_pol.de_pol = MTK_DPI_POLARITY_RISING;
> dpi_pol.hsync_pol = vm.flags & DISPLAY_FLAGS_HSYNC_HIGH ?
> @@ -526,7 +534,7 @@ static int mtk_dpi_set_display_mode(struct
> mtk_dpi *dpi,
> else
> mtk_dpi_config_fb_size(dpi, vm.hactive, vm.vactive);
>
> - mtk_dpi_config_channel_limit(dpi, &limit);
> + mtk_dpi_config_channel_limit(dpi);
> mtk_dpi_config_bit_num(dpi, dpi->bit_num);
> mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
> mtk_dpi_config_yc_map(dpi, dpi->yc_map);
More information about the dri-devel
mailing list