[PATCH v15 13/16] drm/mediatek: dpi: Add YUV422 output support
Rex-BC Chen
rex-bc.chen at mediatek.com
Tue Jul 5 08:39:56 UTC 2022
On Tue, 2022-07-05 at 13:21 +0800, CK Hu wrote:
> Hi, Bo-Chen:
>
> On Fri, 2022-07-01 at 11:58 +0800, Bo-Chen Chen wrote:
> > Dp_intf supports YUV422 as output format. In MT8195 Chrome project,
> > YUV422 output format is used for 4K resolution.
> >
> > To support this, it is also needed to support color format
> > transfer.
> > Color format transfer is a new feature for both dpi and dpintf of
> > MT8195.
> >
> > The input format could be RGB888 and output format for dp_intf
> > should
> > be
> > YUV422. Therefore, we add a mtk_dpi_matrix_sel() helper to update
> > the
> > DPI_MATRIX_SET register depending on the color format.
> >
> > Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> > Signed-off-by: Bo-Chen Chen <rex-bc.chen at mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno at collabora.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_dpi.c | 61 +++++++++++++++++++++
> > ----
> > drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 6 +++
> > 2 files changed, 59 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index 3085033becbd..0a604bf68b1b 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -54,7 +54,8 @@ enum mtk_dpi_out_channel_swap {
> > };
> >
> > enum mtk_dpi_out_color_format {
> > - MTK_DPI_COLOR_FORMAT_RGB
> > + MTK_DPI_COLOR_FORMAT_RGB,
> > + MTK_DPI_COLOR_FORMAT_YCBCR_422
> > };
> >
> > struct mtk_dpi {
> > @@ -122,6 +123,7 @@ struct mtk_dpi_yc_limit {
> > * @num_output_fmts: Quantity of supported output formats.
> > * @is_ck_de_pol: Support CK/DE polarity.
> > * @swap_input_support: Support input swap function.
> > + * @color_fmt_trans_support: Enable color format transfer.
> > * @dimension_mask: Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and
> > VSYNC_PORCH
> > * (no shift).
> > * @hvsize_mask: Mask of HSIZE and VSIZE mask (no shift).
> > @@ -138,6 +140,7 @@ struct mtk_dpi_conf {
> > u32 num_output_fmts;
> > bool is_ck_de_pol;
> > bool swap_input_support;
> > + bool color_fmt_trans_support;
> > u32 dimension_mask;
> > u32 hvsize_mask;
> > u32 channel_swap_shift;
> > @@ -406,15 +409,54 @@ static void
> > mtk_dpi_config_disable_edge(struct
> > mtk_dpi *dpi)
> > mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0,
> > EDGE_SEL_EN);
> > }
> >
> > +static void mtk_dpi_matrix_sel(struct mtk_dpi *dpi,
> > + enum mtk_dpi_out_color_format format)
>
> The format would only be MTK_DPI_COLOR_FORMAT_YCBCR_422, so drop the
> parameter format.
>
> > +{
> > + u32 matrix_sel;
> > +
> > + if (!dpi->conf->color_fmt_trans_support) {
>
> Only YUV format would call this function, and I think YUV support
> would
> imply that color_fmt_trans_support is true. So drop
> color_fmt_trans_support.
>
> > + dev_info(dpi->dev, "matrix_sel is not supported.\n");
> > + return;
> > + }
> > +
> > + switch (format) {
> > + case MTK_DPI_COLOR_FORMAT_YCBCR_422:
> > + /*
> > + * If height is smaller than 720, we need to use
> > RGB_TO_BT601
> > + * to transfer to yuv422. Otherwise, we use
> > RGB_TO_JPEG.
> > + */
> > + if (dpi->mode.hdisplay <= 720)
> > + matrix_sel = MATRIX_SEL_RGB_TO_BT601;
> > + else
> > + matrix_sel = MATRIX_SEL_RGB_TO_JPEG;
> > + break;
> > + default:
> > + matrix_sel = MATRIX_SEL_RGB_TO_JPEG;
> > + break;
> > + }
> > + mtk_dpi_mask(dpi, DPI_MATRIX_SET, matrix_sel,
> > INT_MATRIX_SEL_MASK);
>
> it seems that we could drop this function and write register as:
>
> mtk_dpi_mask(dpi, DPI_MATRIX_SET, dpi->mode.hdisplay <= 720
> ? MATRIX_SEL_RGB_TO_BT601 : MATRIX_SEL_RGB_TO_JPEG,
> INT_MATRIX_SEL_MASK);
>
Hello CK,
ok, I will drop this function and config.
> > +}
> > +
> > static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> > enum mtk_dpi_out_color_format
> > format)
> > {
> > - /* only support RGB888 */
> > - mtk_dpi_config_yuv422_enable(dpi, false);
> > - mtk_dpi_config_csc_enable(dpi, false);
> > - if (dpi->conf->swap_input_support)
> > - mtk_dpi_config_swap_input(dpi, false);
> > - mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> > + if (format == MTK_DPI_COLOR_FORMAT_YCBCR_422) {
> > + mtk_dpi_config_yuv422_enable(dpi, true);
> > + mtk_dpi_config_csc_enable(dpi, true);
> > + mtk_dpi_matrix_sel(dpi, format);
> > + if (dpi->conf->swap_input_support)
>
> This would never be true because only MT8195 support
> MTK_DPI_COLOR_FORMAT_YCBCR_422 and swap_input_support of MT8195 is
> false.
>
I think for mt8195, it should be support output format yuv422 and
rgb888.
please refer to [16/16]
+static const u32 mt8195_output_fmts[] = {
+ MEDIA_BUS_FMT_RGB888_1X24,
+ MEDIA_BUS_FMT_YUYV8_1X16,
+};
BRs,
Bo-Chen
> Regards,
> CK
>
> > + mtk_dpi_config_swap_input(dpi, true);
> > + else
> > + dev_warn(dpi->dev,
> > + "Failed to swap input, hw is not
> > supported.\n");
> > + mtk_dpi_config_channel_swap(dpi,
> > MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> > + } else {
> > + mtk_dpi_config_yuv422_enable(dpi, false);
> > + mtk_dpi_config_csc_enable(dpi, false);
> > + if (dpi->conf->swap_input_support)
> > + mtk_dpi_config_swap_input(dpi, false);
> > + mtk_dpi_config_channel_swap(dpi,
> > MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> > + }
> > }
> >
> > static void mtk_dpi_dual_edge(struct mtk_dpi *dpi)
> > @@ -649,7 +691,10 @@ static int mtk_dpi_bridge_atomic_check(struct
> > drm_bridge *bridge,
> > dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> > dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> > dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> > - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> > + if (out_bus_format == MEDIA_BUS_FMT_YUYV8_1X16)
> > + dpi->color_format = MTK_DPI_COLOR_FORMAT_YCBCR_422;
> > + else
> > + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> >
> > return 0;
> > }
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > index 3a02fabe1662..9ce300313f3e 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > @@ -217,4 +217,10 @@
> >
> > #define EDGE_SEL_EN BIT(5)
> > #define H_FRE_2N BIT(25)
> > +
> > +#define DPI_MATRIX_SET 0xB4
> > +#define INT_MATRIX_SEL_MASK GENMASK(4, 0)
> > +#define MATRIX_SEL_RGB_TO_JPEG 0
> > +#define MATRIX_SEL_RGB_TO_BT601 2
> > +
> > #endif /* __MTK_DPI_REGS_H */
>
>
More information about the dri-devel
mailing list