[PATCH] drm: Fix EDID firmware load on resume
Matthieu CHARETTE
matthieu.charette at gmail.com
Wed Jul 6 14:58:08 UTC 2022
Loading an EDID using drm.edid_firmware parameter makes resume to fail
after firmware cache is being cleaned. This is because edid_load() use a
temporary device to request the firmware. This cause the EDID firmware
not to be cached from suspend. And, requesting the EDID firmware return
an error during resume.
So the request_firmware() call should use a permanent device for each
connector. Also, we should cache the EDID even if no monitor is
connected, in case it's plugged while suspended.
Signed-off-by: Matthieu CHARETTE <matthieu.charette at gmail.com>
---
drivers/gpu/drm/drm_connector.c | 9 ++++
drivers/gpu/drm/drm_edid_load.c | 81 ++++++++++++++++++++++++++++-----
include/drm/drm_connector.h | 12 +++++
include/drm/drm_edid.h | 3 ++
4 files changed, 94 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/drm_connector.c
b/drivers/gpu/drm/drm_connector.c
index 1c48d162c77e..e8819ebf1c4b 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -31,6 +31,7 @@
#include <drm/drm_privacy_screen_consumer.h>
#include <drm/drm_sysfs.h>
+#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include "drm_crtc_internal.h"
@@ -289,6 +290,9 @@ int drm_connector_init(struct drm_device *dev,
drm_connector_get_cmdline_mode(connector);
+ connector->edid_load_pdev = NULL;
+ drm_cache_edid_firmware(connector);
+
/* We should add connectors at the end to avoid upsetting the
connector
* index too much.
*/
@@ -473,6 +477,11 @@ void drm_connector_cleanup(struct drm_connector
*connector)
connector->tile_group = NULL;
}
+ if (connector->edid_load_pdev) {
+ platform_device_unregister(connector->edid_load_pdev);
+ connector->edid_load_pdev = NULL;
+ }
+
list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
drm_mode_remove(connector, mode);
diff --git a/drivers/gpu/drm/drm_edid_load.c
b/drivers/gpu/drm/drm_edid_load.c
index 37d8ba3ddb46..5a82be9917ec 100644
--- a/drivers/gpu/drm/drm_edid_load.c
+++ b/drivers/gpu/drm/drm_edid_load.c
@@ -167,6 +167,19 @@ static int edid_size(const u8 *edid, int data_size)
return (edid[0x7e] + 1) * EDID_LENGTH;
}
+static struct platform_device *edid_pdev(const char *connector_name)
+{
+ struct platform_device *pdev =
platform_device_register_simple(connector_name, -1, NULL, 0);
+
+ if (IS_ERR(pdev)) {
+ DRM_ERROR("Failed to register EDID firmware platform device "
+ "for connector \"%s\"\n", connector_name);
+ return ERR_CAST(pdev);
+ }
+
+ return pdev;
+}
+
static void *edid_load(struct drm_connector *connector, const char
*name,
const char *connector_name)
{
@@ -182,18 +195,17 @@ static void *edid_load(struct drm_connector
*connector, const char *name,
fwdata = generic_edid[builtin];
fwsize = sizeof(generic_edid[builtin]);
} else {
- struct platform_device *pdev;
+ struct platform_device *pdev = connector->edid_load_pdev;
int err;
- pdev = platform_device_register_simple(connector_name, -1, NULL, 0);
- if (IS_ERR(pdev)) {
- DRM_ERROR("Failed to register EDID firmware platform device "
- "for connector \"%s\"\n", connector_name);
- return ERR_CAST(pdev);
+ if (WARN_ON(!pdev)) {
+ pdev = edid_pdev(connector_name);
+ if (IS_ERR(pdev))
+ return ERR_CAST(pdev);
+ connector->edid_load_pdev = pdev;
}
err = request_firmware(&fw, name, &pdev->dev);
- platform_device_unregister(pdev);
if (err) {
DRM_ERROR("Requesting EDID firmware \"%s\" failed (err=%d)\n",
name, err);
@@ -263,11 +275,9 @@ static void *edid_load(struct drm_connector
*connector, const char *name,
return edid;
}
-struct edid *drm_load_edid_firmware(struct drm_connector *connector)
+static char *edid_name(const char *connector_name)
{
- const char *connector_name = connector->name;
char *edidname, *last, *colon, *fwstr, *edidstr, *fallback = NULL;
- struct edid *edid;
if (edid_firmware[0] == '\0')
return ERR_PTR(-ENOENT);
@@ -310,8 +320,57 @@ struct edid *drm_load_edid_firmware(struct
drm_connector *connector)
if (*last == '\n')
*last = '\0';
- edid = edid_load(connector, edidname, connector_name);
+ edidname = kstrdup(edidname, GFP_KERNEL);
+ if (!edidname) {
+ kfree(fwstr);
+ return ERR_PTR(-ENOMEM);
+ }
+
kfree(fwstr);
+ return edidname;
+}
+
+void drm_cache_edid_firmware(struct drm_connector *connector)
+{
+ const char *connector_name = connector->name;
+ const char *edidname = edid_name(connector_name);
+ struct platform_device *pdev;
+ int err;
+
+ if (IS_ERR(edidname))
+ return;
+
+ if (match_string(generic_edid_name, GENERIC_EDIDS, edidname) >= 0) {
+ kfree(edidname);
+ return;
+ }
+
+ pdev = edid_pdev(connector_name);
+ if (IS_ERR(pdev)) {
+ kfree(edidname);
+ return;
+ }
+ connector->edid_load_pdev = pdev;
+
+ err = firmware_request_cache(&pdev->dev, edidname);
+ if (err)
+ DRM_ERROR("Requesting EDID firmware cache \"%s\" failed (err=%d)\n",
+ edidname, err);
+
+ kfree(edidname);
+}
+
+struct edid *drm_load_edid_firmware(struct drm_connector *connector)
+{
+ const char *connector_name = connector->name;
+ const char *edidname = edid_name(connector_name);
+ struct edid *edid;
+
+ if (IS_ERR(edidname))
+ return ERR_CAST(edidname);
+
+ edid = edid_load(connector, edidname, connector_name);
+ kfree(edidname);
return edid;
}
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 3ac4bf87f257..47c84741517e 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1573,6 +1573,18 @@ struct drm_connector {
*/
struct i2c_adapter *ddc;
+ /**
+ * @edid_load_pdev: Platform device for loading EDID via firmware.
+ *
+ * The platform device is registered in drm_connector_init() in case a
+ * custom EDID firmware is used with `edid_firmware` parameter.
Otherwise,
+ * it is set to NULL.
+ *
+ * Platform device is unregistered in drm_connector_cleanup() if it
+ * is not NULL.
+ */
+ struct platform_device *edid_load_pdev;
+
/**
* @null_edid_counter: track sinks that give us all zeros for the
EDID.
* Needed to workaround some HW bugs where we get all 0s
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index b2756753370b..b54cea3f1107 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -378,10 +378,13 @@ int drm_av_sync_delay(struct drm_connector
*connector,
const struct drm_display_mode *mode);
#ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE
+void drm_cache_edid_firmware(struct drm_connector *connector);
struct edid *drm_load_edid_firmware(struct drm_connector *connector);
int __drm_set_edid_firmware_path(const char *path);
int __drm_get_edid_firmware_path(char *buf, size_t bufsize);
#else
+static inline void
+drm_cache_edid_firmware(struct drm_connector *connector);
static inline struct edid *
drm_load_edid_firmware(struct drm_connector *connector)
{
--
2.36.1
More information about the dri-devel
mailing list