[PATCH v2 3/9] arm64: dts: qcom: sc7280: split register block for DP controller

[Dmitry Baryshkov]

Follow the schema for the DP controller and declare 5 register regions
instead of using a single region for all the registers. Note, this
extends the dts by adding p1 region to the DP node (to be used for DP
MST).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index a3def1022ea2..e54c2000b098 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3810,7 +3810,11 @@ mdss_edp_phy: phy at aec2a00 {
 			mdss_dp: displayport-controller at ae90000 {
 				compatible = "qcom,sc7280-dp";
 
-				reg = <0 0x0ae90000 0 0x1400>;
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0xc00>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <12>;
-- 
2.35.1