[PATCH v6 09/10] drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver

[Dmitry Baryshkov]

On 11/07/2022 15:57, Vinod Polimera wrote:
> Enable PSR on eDP interface using drm self-refresh librabry.
> This patch uses a trigger from self-refresh library to enter/exit
> into PSR, when there are no updates from framework.
> 
> Signed-off-by: Kalyan Thota <quic_kalyant at quicinc.com>
> Signed-off-by: Vinod Polimera <quic_vpolimer at quicinc.com>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    | 13 ++++++++++++-
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 14 ++++++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     |  2 +-
>   3 files changed, 27 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index f91e3d1..eb3915a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -18,6 +18,7 @@
>   #include <drm/drm_probe_helper.h>
>   #include <drm/drm_rect.h>
>   #include <drm/drm_vblank.h>
> +#include <drm/drm_self_refresh_helper.h>
>   
>   #include "dpu_kms.h"
>   #include "dpu_hw_lm.h"
> @@ -961,6 +962,9 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
>   
>   	DRM_DEBUG_KMS("crtc%d\n", crtc->base.id);
>   
> +	if (old_crtc_state->self_refresh_active)
> +		return;
> +
>   	/* Disable/save vblank irq handling */
>   	drm_crtc_vblank_off(crtc);
>   
> @@ -1521,7 +1525,7 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
>   {
>   	struct drm_crtc *crtc = NULL;
>   	struct dpu_crtc *dpu_crtc = NULL;
> -	int i;
> +	int i, ret;
>   
>   	dpu_crtc = kzalloc(sizeof(*dpu_crtc), GFP_KERNEL);
>   	if (!dpu_crtc)
> @@ -1558,6 +1562,13 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
>   	/* initialize event handling */
>   	spin_lock_init(&dpu_crtc->event_lock);
>   
> +	ret = drm_self_refresh_helper_init(crtc);
> +	if (ret) {
> +		DPU_ERROR("Failed to initialize %s with self-refresh helpers %d\n",
> +			crtc->name, ret);
> +		return ERR_PTR(ret);
> +	}
> +
>   	DRM_DEBUG_KMS("%s: successfully initialized crtc\n", dpu_crtc->name);
>   	return crtc;
>   }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 3156efb..5dfb56a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -12,6 +12,7 @@
>   #include <linux/kthread.h>
>   #include <linux/seq_file.h>
>   
> +#include <drm/drm_atomic.h>
>   #include <drm/drm_crtc.h>
>   #include <drm/drm_file.h>
>   #include <drm/drm_probe_helper.h>
> @@ -1170,11 +1171,24 @@ static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc,
>   					struct drm_atomic_state *state)
>   {
>   	struct dpu_encoder_virt *dpu_enc = NULL;
> +	struct drm_crtc *crtc;
> +	struct drm_crtc_state *old_state = NULL;
>   	int i = 0;
>   
>   	dpu_enc = to_dpu_encoder_virt(drm_enc);
>   	DPU_DEBUG_ENC(dpu_enc, "\n");
>   
> +	crtc = drm_atomic_get_old_crtc_for_encoder(state, drm_enc);
> +	if (crtc)
> +		old_state = drm_atomic_get_old_crtc_state(state, crtc);
> +
> +	/*
> +	 * The encoder is already disabled if self refresh mode was set earlier,
> +	 * in the old_state for the corresponding crtc.
> +	 */
> +	if (old_state && old_state->self_refresh_active)
> +		return;
> +
>   	mutex_lock(&dpu_enc->enc_lock);
>   	dpu_enc->enabled = false;
>   
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index bce4764..cc0a674 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -507,7 +507,7 @@ static void dpu_kms_wait_for_commit_done(struct msm_kms *kms,
>   		return;
>   	}
>   
> -	if (!crtc->state->active) {
> +	if (!drm_atomic_crtc_effectively_active(crtc->state)) {
>   		DPU_DEBUG("[crtc:%d] not active\n", crtc->base.id);
>   		return;
>   	}


-- 
With best wishes
Dmitry