[PATCH 1/3] drm/bridge: it6505: Modified power sequence

[Robert Foss]

Hi Allen,

On Thu, 7 Jul 2022 at 10:06, allen <allen.chen at ite.com.tw> wrote:
>
> From: allen chen <allen.chen at ite.com.tw>
>
> Change power sequence to meet it6505 data sheet requirement when boot on.
>
> Signed-off-by: Pin-Yen Lin <treapking at chromium.org>
> Signed-off-by: Allen Chen <allen.chen at ite.com.tw>
>
> ---
>  drivers/gpu/drm/bridge/ite-it6505.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
> index 2d119e3016b3..aa5e0aa1af85 100644
> --- a/drivers/gpu/drm/bridge/ite-it6505.c
> +++ b/drivers/gpu/drm/bridge/ite-it6505.c
> @@ -3029,7 +3029,7 @@ static int it6505_init_pdata(struct it6505 *it6505)
>                 return PTR_ERR(pdata->ovdd);
>         }
>
> -       pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> +       pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);

Making this change is problematic since it requires a corresponding
change in all of the device trees that use this device. It's against
policy to change this interface after it has been introduced.

Unless anyone thinks otherwise, I would like to see this patch dropped.

>         if (IS_ERR(pdata->gpiod_reset)) {
>                 dev_err(dev, "gpiod_reset gpio not found");
>                 return PTR_ERR(pdata->gpiod_reset);
> --
> 2.25.1
>