[PATCH v2 07/13] drm/via: Embed via_dmablit in via_dri1
Sam Ravnborg
sam at ravnborg.org
Wed Jul 13 17:01:56 UTC 2022
Embed some of the header file in via_drv.h and
the rest in via_dri1.c
While embedding deleted extra empty lines and functions that
has no external users are made static.
Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann at suse.de>
Cc: Kevin Brace <kevinbrace at bracecomputerlab.com>
---
drivers/gpu/drm/via/Makefile | 2 +-
drivers/gpu/drm/via/via_dmablit.c | 807 ------------------------------
drivers/gpu/drm/via/via_dmablit.h | 140 ------
drivers/gpu/drm/via/via_dri1.c | 786 +++++++++++++++++++++++++++++
drivers/gpu/drm/via/via_drv.h | 56 ++-
5 files changed, 835 insertions(+), 956 deletions(-)
delete mode 100644 drivers/gpu/drm/via/via_dmablit.c
delete mode 100644 drivers/gpu/drm/via/via_dmablit.h
diff --git a/drivers/gpu/drm/via/Makefile b/drivers/gpu/drm/via/Makefile
index dd75ea8a1423..66125b150478 100644
--- a/drivers/gpu/drm/via/Makefile
+++ b/drivers/gpu/drm/via/Makefile
@@ -3,6 +3,6 @@
# Makefile for the drm device driver. This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
-via-y := via_dri1.o via_verifier.o via_dmablit.o
+via-y := via_dri1.o via_verifier.o
obj-$(CONFIG_DRM_VIA) +=via.o
diff --git a/drivers/gpu/drm/via/via_dmablit.c b/drivers/gpu/drm/via/via_dmablit.c
deleted file mode 100644
index e016a4d62090..000000000000
--- a/drivers/gpu/drm/via/via_dmablit.c
+++ /dev/null
@@ -1,807 +0,0 @@
-/* via_dmablit.c -- PCI DMA BitBlt support for the VIA Unichrome/Pro
- *
- * Copyright (C) 2005 Thomas Hellstrom, All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sub license,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the
- * next paragraph) shall be included in all copies or substantial portions
- * of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
- * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
- * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
- * USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Hellstrom.
- * Partially based on code obtained from Digeo Inc.
- */
-
-
-/*
- * Unmaps the DMA mappings.
- * FIXME: Is this a NoOp on x86? Also
- * FIXME: What happens if this one is called and a pending blit has previously done
- * the same DMA mappings?
- */
-
-#include <linux/pagemap.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include <drm/drm_device.h>
-#include <drm/via_drm.h>
-
-#include "via_dmablit.h"
-#include "via_drv.h"
-
-#define VIA_PGDN(x) (((unsigned long)(x)) & PAGE_MASK)
-#define VIA_PGOFF(x) (((unsigned long)(x)) & ~PAGE_MASK)
-#define VIA_PFN(x) ((unsigned long)(x) >> PAGE_SHIFT)
-
-typedef struct _drm_via_descriptor {
- uint32_t mem_addr;
- uint32_t dev_addr;
- uint32_t size;
- uint32_t next;
-} drm_via_descriptor_t;
-
-
-/*
- * Unmap a DMA mapping.
- */
-
-
-
-static void
-via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
-{
- int num_desc = vsg->num_desc;
- unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page;
- unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page;
- drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] +
- descriptor_this_page;
- dma_addr_t next = vsg->chain_start;
-
- while (num_desc--) {
- if (descriptor_this_page-- == 0) {
- cur_descriptor_page--;
- descriptor_this_page = vsg->descriptors_per_page - 1;
- desc_ptr = vsg->desc_pages[cur_descriptor_page] +
- descriptor_this_page;
- }
- dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE);
- dma_unmap_page(&pdev->dev, desc_ptr->mem_addr, desc_ptr->size, vsg->direction);
- next = (dma_addr_t) desc_ptr->next;
- desc_ptr--;
- }
-}
-
-/*
- * If mode = 0, count how many descriptors are needed.
- * If mode = 1, Map the DMA pages for the device, put together and map also the descriptors.
- * Descriptors are run in reverse order by the hardware because we are not allowed to update the
- * 'next' field without syncing calls when the descriptor is already mapped.
- */
-
-static void
-via_map_blit_for_device(struct pci_dev *pdev,
- const drm_via_dmablit_t *xfer,
- drm_via_sg_info_t *vsg,
- int mode)
-{
- unsigned cur_descriptor_page = 0;
- unsigned num_descriptors_this_page = 0;
- unsigned char *mem_addr = xfer->mem_addr;
- unsigned char *cur_mem;
- unsigned char *first_addr = (unsigned char *)VIA_PGDN(mem_addr);
- uint32_t fb_addr = xfer->fb_addr;
- uint32_t cur_fb;
- unsigned long line_len;
- unsigned remaining_len;
- int num_desc = 0;
- int cur_line;
- dma_addr_t next = 0 | VIA_DMA_DPR_EC;
- drm_via_descriptor_t *desc_ptr = NULL;
-
- if (mode == 1)
- desc_ptr = vsg->desc_pages[cur_descriptor_page];
-
- for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) {
-
- line_len = xfer->line_length;
- cur_fb = fb_addr;
- cur_mem = mem_addr;
-
- while (line_len > 0) {
-
- remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len);
- line_len -= remaining_len;
-
- if (mode == 1) {
- desc_ptr->mem_addr =
- dma_map_page(&pdev->dev,
- vsg->pages[VIA_PFN(cur_mem) -
- VIA_PFN(first_addr)],
- VIA_PGOFF(cur_mem), remaining_len,
- vsg->direction);
- desc_ptr->dev_addr = cur_fb;
-
- desc_ptr->size = remaining_len;
- desc_ptr->next = (uint32_t) next;
- next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr),
- DMA_TO_DEVICE);
- desc_ptr++;
- if (++num_descriptors_this_page >= vsg->descriptors_per_page) {
- num_descriptors_this_page = 0;
- desc_ptr = vsg->desc_pages[++cur_descriptor_page];
- }
- }
-
- num_desc++;
- cur_mem += remaining_len;
- cur_fb += remaining_len;
- }
-
- mem_addr += xfer->mem_stride;
- fb_addr += xfer->fb_stride;
- }
-
- if (mode == 1) {
- vsg->chain_start = next;
- vsg->state = dr_via_device_mapped;
- }
- vsg->num_desc = num_desc;
-}
-
-/*
- * Function that frees up all resources for a blit. It is usable even if the
- * blit info has only been partially built as long as the status enum is consistent
- * with the actual status of the used resources.
- */
-
-
-static void
-via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
-{
- int i;
-
- switch (vsg->state) {
- case dr_via_device_mapped:
- via_unmap_blit_from_device(pdev, vsg);
- fallthrough;
- case dr_via_desc_pages_alloc:
- for (i = 0; i < vsg->num_desc_pages; ++i) {
- if (vsg->desc_pages[i] != NULL)
- free_page((unsigned long)vsg->desc_pages[i]);
- }
- kfree(vsg->desc_pages);
- fallthrough;
- case dr_via_pages_locked:
- unpin_user_pages_dirty_lock(vsg->pages, vsg->num_pages,
- (vsg->direction == DMA_FROM_DEVICE));
- fallthrough;
- case dr_via_pages_alloc:
- vfree(vsg->pages);
- fallthrough;
- default:
- vsg->state = dr_via_sg_init;
- }
- vfree(vsg->bounce_buffer);
- vsg->bounce_buffer = NULL;
- vsg->free_on_sequence = 0;
-}
-
-/*
- * Fire a blit engine.
- */
-
-static void
-via_fire_dmablit(struct drm_device *dev, drm_via_sg_info_t *vsg, int engine)
-{
- drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
-
- via_write(dev_priv, VIA_PCI_DMA_MAR0 + engine*0x10, 0);
- via_write(dev_priv, VIA_PCI_DMA_DAR0 + engine*0x10, 0);
- via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD |
- VIA_DMA_CSR_DE);
- via_write(dev_priv, VIA_PCI_DMA_MR0 + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE);
- via_write(dev_priv, VIA_PCI_DMA_BCR0 + engine*0x10, 0);
- via_write(dev_priv, VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start);
- wmb();
- via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS);
- via_read(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04);
-}
-
-/*
- * Obtain a page pointer array and lock all pages into system memory. A segmentation violation will
- * occur here if the calling user does not have access to the submitted address.
- */
-
-static int
-via_lock_all_dma_pages(drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer)
-{
- int ret;
- unsigned long first_pfn = VIA_PFN(xfer->mem_addr);
- vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) -
- first_pfn + 1;
-
- vsg->pages = vzalloc(array_size(sizeof(struct page *), vsg->num_pages));
- if (NULL == vsg->pages)
- return -ENOMEM;
- ret = pin_user_pages_fast((unsigned long)xfer->mem_addr,
- vsg->num_pages,
- vsg->direction == DMA_FROM_DEVICE ? FOLL_WRITE : 0,
- vsg->pages);
- if (ret != vsg->num_pages) {
- if (ret < 0)
- return ret;
- vsg->state = dr_via_pages_locked;
- return -EINVAL;
- }
- vsg->state = dr_via_pages_locked;
- DRM_DEBUG("DMA pages locked\n");
- return 0;
-}
-
-/*
- * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the
- * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be
- * quite large for some blits, and pages don't need to be contiguous.
- */
-
-static int
-via_alloc_desc_pages(drm_via_sg_info_t *vsg)
-{
- int i;
-
- vsg->descriptors_per_page = PAGE_SIZE / sizeof(drm_via_descriptor_t);
- vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) /
- vsg->descriptors_per_page;
-
- if (NULL == (vsg->desc_pages = kcalloc(vsg->num_desc_pages, sizeof(void *), GFP_KERNEL)))
- return -ENOMEM;
-
- vsg->state = dr_via_desc_pages_alloc;
- for (i = 0; i < vsg->num_desc_pages; ++i) {
- if (NULL == (vsg->desc_pages[i] =
- (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL)))
- return -ENOMEM;
- }
- DRM_DEBUG("Allocated %d pages for %d descriptors.\n", vsg->num_desc_pages,
- vsg->num_desc);
- return 0;
-}
-
-static void
-via_abort_dmablit(struct drm_device *dev, int engine)
-{
- drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
-
- via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TA);
-}
-
-static void
-via_dmablit_engine_off(struct drm_device *dev, int engine)
-{
- drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
-
- via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD);
-}
-
-
-
-/*
- * The dmablit part of the IRQ handler. Trying to do only reasonably fast things here.
- * The rest, like unmapping and freeing memory for done blits is done in a separate workqueue
- * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while
- * the workqueue task takes care of processing associated with the old blit.
- */
-
-void
-via_dmablit_handler(struct drm_device *dev, int engine, int from_irq)
-{
- drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
- drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
- int cur;
- int done_transfer;
- unsigned long irqsave = 0;
- uint32_t status = 0;
-
- DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n",
- engine, from_irq, (unsigned long) blitq);
-
- if (from_irq)
- spin_lock(&blitq->blit_lock);
- else
- spin_lock_irqsave(&blitq->blit_lock, irqsave);
-
- done_transfer = blitq->is_active &&
- ((status = via_read(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD);
- done_transfer = done_transfer || (blitq->aborting && !(status & VIA_DMA_CSR_DE));
-
- cur = blitq->cur;
- if (done_transfer) {
-
- blitq->blits[cur]->aborted = blitq->aborting;
- blitq->done_blit_handle++;
- wake_up(blitq->blit_queue + cur);
-
- cur++;
- if (cur >= VIA_NUM_BLIT_SLOTS)
- cur = 0;
- blitq->cur = cur;
-
- /*
- * Clear transfer done flag.
- */
-
- via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD);
-
- blitq->is_active = 0;
- blitq->aborting = 0;
- schedule_work(&blitq->wq);
-
- } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) {
-
- /*
- * Abort transfer after one second.
- */
-
- via_abort_dmablit(dev, engine);
- blitq->aborting = 1;
- blitq->end = jiffies + HZ;
- }
-
- if (!blitq->is_active) {
- if (blitq->num_outstanding) {
- via_fire_dmablit(dev, blitq->blits[cur], engine);
- blitq->is_active = 1;
- blitq->cur = cur;
- blitq->num_outstanding--;
- blitq->end = jiffies + HZ;
- if (!timer_pending(&blitq->poll_timer))
- mod_timer(&blitq->poll_timer, jiffies + 1);
- } else {
- if (timer_pending(&blitq->poll_timer))
- del_timer(&blitq->poll_timer);
- via_dmablit_engine_off(dev, engine);
- }
- }
-
- if (from_irq)
- spin_unlock(&blitq->blit_lock);
- else
- spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
-}
-
-
-
-/*
- * Check whether this blit is still active, performing necessary locking.
- */
-
-static int
-via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_queue_head_t **queue)
-{
- unsigned long irqsave;
- uint32_t slot;
- int active;
-
- spin_lock_irqsave(&blitq->blit_lock, irqsave);
-
- /*
- * Allow for handle wraparounds.
- */
-
- active = ((blitq->done_blit_handle - handle) > (1 << 23)) &&
- ((blitq->cur_blit_handle - handle) <= (1 << 23));
-
- if (queue && active) {
- slot = handle - blitq->done_blit_handle + blitq->cur - 1;
- if (slot >= VIA_NUM_BLIT_SLOTS)
- slot -= VIA_NUM_BLIT_SLOTS;
- *queue = blitq->blit_queue + slot;
- }
-
- spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
-
- return active;
-}
-
-/*
- * Sync. Wait for at least three seconds for the blit to be performed.
- */
-
-static int
-via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine)
-{
-
- drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
- drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
- wait_queue_head_t *queue;
- int ret = 0;
-
- if (via_dmablit_active(blitq, engine, handle, &queue)) {
- VIA_WAIT_ON(ret, *queue, 3 * HZ,
- !via_dmablit_active(blitq, engine, handle, NULL));
- }
- DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n",
- handle, engine, ret);
-
- return ret;
-}
-
-
-/*
- * A timer that regularly polls the blit engine in cases where we don't have interrupts:
- * a) Broken hardware (typically those that don't have any video capture facility).
- * b) Blit abort. The hardware doesn't send an interrupt when a blit is aborted.
- * The timer and hardware IRQ's can and do work in parallel. If the hardware has
- * irqs, it will shorten the latency somewhat.
- */
-
-
-
-static void
-via_dmablit_timer(struct timer_list *t)
-{
- drm_via_blitq_t *blitq = from_timer(blitq, t, poll_timer);
- struct drm_device *dev = blitq->dev;
- int engine = (int)
- (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues);
-
- DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine,
- (unsigned long) jiffies);
-
- via_dmablit_handler(dev, engine, 0);
-
- if (!timer_pending(&blitq->poll_timer)) {
- mod_timer(&blitq->poll_timer, jiffies + 1);
-
- /*
- * Rerun handler to delete timer if engines are off, and
- * to shorten abort latency. This is a little nasty.
- */
-
- via_dmablit_handler(dev, engine, 0);
-
- }
-}
-
-
-
-
-/*
- * Workqueue task that frees data and mappings associated with a blit.
- * Also wakes up waiting processes. Each of these tasks handles one
- * blit engine only and may not be called on each interrupt.
- */
-
-
-static void
-via_dmablit_workqueue(struct work_struct *work)
-{
- drm_via_blitq_t *blitq = container_of(work, drm_via_blitq_t, wq);
- struct drm_device *dev = blitq->dev;
- struct pci_dev *pdev = to_pci_dev(dev->dev);
- unsigned long irqsave;
- drm_via_sg_info_t *cur_sg;
- int cur_released;
-
-
- DRM_DEBUG("Workqueue task called for blit engine %ld\n", (unsigned long)
- (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues));
-
- spin_lock_irqsave(&blitq->blit_lock, irqsave);
-
- while (blitq->serviced != blitq->cur) {
-
- cur_released = blitq->serviced++;
-
- DRM_DEBUG("Releasing blit slot %d\n", cur_released);
-
- if (blitq->serviced >= VIA_NUM_BLIT_SLOTS)
- blitq->serviced = 0;
-
- cur_sg = blitq->blits[cur_released];
- blitq->num_free++;
-
- spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
-
- wake_up(&blitq->busy_queue);
-
- via_free_sg_info(pdev, cur_sg);
- kfree(cur_sg);
-
- spin_lock_irqsave(&blitq->blit_lock, irqsave);
- }
-
- spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
-}
-
-
-/*
- * Init all blit engines. Currently we use two, but some hardware have 4.
- */
-
-
-void
-via_init_dmablit(struct drm_device *dev)
-{
- int i, j;
- drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
- struct pci_dev *pdev = to_pci_dev(dev->dev);
- drm_via_blitq_t *blitq;
-
- pci_set_master(pdev);
-
- for (i = 0; i < VIA_NUM_BLIT_ENGINES; ++i) {
- blitq = dev_priv->blit_queues + i;
- blitq->dev = dev;
- blitq->cur_blit_handle = 0;
- blitq->done_blit_handle = 0;
- blitq->head = 0;
- blitq->cur = 0;
- blitq->serviced = 0;
- blitq->num_free = VIA_NUM_BLIT_SLOTS - 1;
- blitq->num_outstanding = 0;
- blitq->is_active = 0;
- blitq->aborting = 0;
- spin_lock_init(&blitq->blit_lock);
- for (j = 0; j < VIA_NUM_BLIT_SLOTS; ++j)
- init_waitqueue_head(blitq->blit_queue + j);
- init_waitqueue_head(&blitq->busy_queue);
- INIT_WORK(&blitq->wq, via_dmablit_workqueue);
- timer_setup(&blitq->poll_timer, via_dmablit_timer, 0);
- }
-}
-
-/*
- * Build all info and do all mappings required for a blit.
- */
-
-
-static int
-via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer)
-{
- struct pci_dev *pdev = to_pci_dev(dev->dev);
- int draw = xfer->to_fb;
- int ret = 0;
-
- vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
- vsg->bounce_buffer = NULL;
-
- vsg->state = dr_via_sg_init;
-
- if (xfer->num_lines <= 0 || xfer->line_length <= 0) {
- DRM_ERROR("Zero size bitblt.\n");
- return -EINVAL;
- }
-
- /*
- * Below check is a driver limitation, not a hardware one. We
- * don't want to lock unused pages, and don't want to incoporate the
- * extra logic of avoiding them. Make sure there are no.
- * (Not a big limitation anyway.)
- */
-
- if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) {
- DRM_ERROR("Too large system memory stride. Stride: %d, "
- "Length: %d\n", xfer->mem_stride, xfer->line_length);
- return -EINVAL;
- }
-
- if ((xfer->mem_stride == xfer->line_length) &&
- (xfer->fb_stride == xfer->line_length)) {
- xfer->mem_stride *= xfer->num_lines;
- xfer->line_length = xfer->mem_stride;
- xfer->fb_stride = xfer->mem_stride;
- xfer->num_lines = 1;
- }
-
- /*
- * Don't lock an arbitrary large number of pages, since that causes a
- * DOS security hole.
- */
-
- if (xfer->num_lines > 2048 || (xfer->num_lines*xfer->mem_stride > (2048*2048*4))) {
- DRM_ERROR("Too large PCI DMA bitblt.\n");
- return -EINVAL;
- }
-
- /*
- * we allow a negative fb stride to allow flipping of images in
- * transfer.
- */
-
- if (xfer->mem_stride < xfer->line_length ||
- abs(xfer->fb_stride) < xfer->line_length) {
- DRM_ERROR("Invalid frame-buffer / memory stride.\n");
- return -EINVAL;
- }
-
- /*
- * A hardware bug seems to be worked around if system memory addresses start on
- * 16 byte boundaries. This seems a bit restrictive however. VIA is contacted
- * about this. Meanwhile, impose the following restrictions:
- */
-
-#ifdef VIA_BUGFREE
- if ((((unsigned long)xfer->mem_addr & 3) != ((unsigned long)xfer->fb_addr & 3)) ||
- ((xfer->num_lines > 1) && ((xfer->mem_stride & 3) != (xfer->fb_stride & 3)))) {
- DRM_ERROR("Invalid DRM bitblt alignment.\n");
- return -EINVAL;
- }
-#else
- if ((((unsigned long)xfer->mem_addr & 15) ||
- ((unsigned long)xfer->fb_addr & 3)) ||
- ((xfer->num_lines > 1) &&
- ((xfer->mem_stride & 15) || (xfer->fb_stride & 3)))) {
- DRM_ERROR("Invalid DRM bitblt alignment.\n");
- return -EINVAL;
- }
-#endif
-
- if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) {
- DRM_ERROR("Could not lock DMA pages.\n");
- via_free_sg_info(pdev, vsg);
- return ret;
- }
-
- via_map_blit_for_device(pdev, xfer, vsg, 0);
- if (0 != (ret = via_alloc_desc_pages(vsg))) {
- DRM_ERROR("Could not allocate DMA descriptor pages.\n");
- via_free_sg_info(pdev, vsg);
- return ret;
- }
- via_map_blit_for_device(pdev, xfer, vsg, 1);
-
- return 0;
-}
-
-
-/*
- * Reserve one free slot in the blit queue. Will wait for one second for one
- * to become available. Otherwise -EBUSY is returned.
- */
-
-static int
-via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine)
-{
- int ret = 0;
- unsigned long irqsave;
-
- DRM_DEBUG("Num free is %d\n", blitq->num_free);
- spin_lock_irqsave(&blitq->blit_lock, irqsave);
- while (blitq->num_free == 0) {
- spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
-
- VIA_WAIT_ON(ret, blitq->busy_queue, HZ, blitq->num_free > 0);
- if (ret)
- return (-EINTR == ret) ? -EAGAIN : ret;
-
- spin_lock_irqsave(&blitq->blit_lock, irqsave);
- }
-
- blitq->num_free--;
- spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
-
- return 0;
-}
-
-/*
- * Hand back a free slot if we changed our mind.
- */
-
-static void
-via_dmablit_release_slot(drm_via_blitq_t *blitq)
-{
- unsigned long irqsave;
-
- spin_lock_irqsave(&blitq->blit_lock, irqsave);
- blitq->num_free++;
- spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
- wake_up(&blitq->busy_queue);
-}
-
-/*
- * Grab a free slot. Build blit info and queue a blit.
- */
-
-
-static int
-via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer)
-{
- drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
- drm_via_sg_info_t *vsg;
- drm_via_blitq_t *blitq;
- int ret;
- int engine;
- unsigned long irqsave;
-
- if (dev_priv == NULL) {
- DRM_ERROR("Called without initialization.\n");
- return -EINVAL;
- }
-
- engine = (xfer->to_fb) ? 0 : 1;
- blitq = dev_priv->blit_queues + engine;
- if (0 != (ret = via_dmablit_grab_slot(blitq, engine)))
- return ret;
- if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) {
- via_dmablit_release_slot(blitq);
- return -ENOMEM;
- }
- if (0 != (ret = via_build_sg_info(dev, vsg, xfer))) {
- via_dmablit_release_slot(blitq);
- kfree(vsg);
- return ret;
- }
- spin_lock_irqsave(&blitq->blit_lock, irqsave);
-
- blitq->blits[blitq->head++] = vsg;
- if (blitq->head >= VIA_NUM_BLIT_SLOTS)
- blitq->head = 0;
- blitq->num_outstanding++;
- xfer->sync.sync_handle = ++blitq->cur_blit_handle;
-
- spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
- xfer->sync.engine = engine;
-
- via_dmablit_handler(dev, engine, 0);
-
- return 0;
-}
-
-/*
- * Sync on a previously submitted blit. Note that the X server use signals extensively, and
- * that there is a very big probability that this IOCTL will be interrupted by a signal. In that
- * case it returns with -EAGAIN for the signal to be delivered.
- * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock().
- */
-
-int
-via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv)
-{
- drm_via_blitsync_t *sync = data;
- int err;
-
- if (sync->engine >= VIA_NUM_BLIT_ENGINES)
- return -EINVAL;
-
- err = via_dmablit_sync(dev, sync->sync_handle, sync->engine);
-
- if (-EINTR == err)
- err = -EAGAIN;
-
- return err;
-}
-
-
-/*
- * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal
- * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should
- * be reissued. See the above IOCTL code.
- */
-
-int
-via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv)
-{
- drm_via_dmablit_t *xfer = data;
- int err;
-
- err = via_dmablit(dev, xfer);
-
- return err;
-}
diff --git a/drivers/gpu/drm/via/via_dmablit.h b/drivers/gpu/drm/via/via_dmablit.h
deleted file mode 100644
index 9b662a327cef..000000000000
--- a/drivers/gpu/drm/via/via_dmablit.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* via_dmablit.h -- PCI DMA BitBlt support for the VIA Unichrome/Pro
- *
- * Copyright 2005 Thomas Hellstrom.
- * All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sub license,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the
- * next paragraph) shall be included in all copies or substantial portions
- * of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
- * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
- * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
- * USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Hellstrom.
- * Register info from Digeo Inc.
- */
-
-#ifndef _VIA_DMABLIT_H
-#define _VIA_DMABLIT_H
-
-#include <linux/dma-mapping.h>
-
-#define VIA_NUM_BLIT_ENGINES 2
-#define VIA_NUM_BLIT_SLOTS 8
-
-struct _drm_via_descriptor;
-
-typedef struct _drm_via_sg_info {
- struct page **pages;
- unsigned long num_pages;
- struct _drm_via_descriptor **desc_pages;
- int num_desc_pages;
- int num_desc;
- enum dma_data_direction direction;
- unsigned char *bounce_buffer;
- dma_addr_t chain_start;
- uint32_t free_on_sequence;
- unsigned int descriptors_per_page;
- int aborted;
- enum {
- dr_via_device_mapped,
- dr_via_desc_pages_alloc,
- dr_via_pages_locked,
- dr_via_pages_alloc,
- dr_via_sg_init
- } state;
-} drm_via_sg_info_t;
-
-typedef struct _drm_via_blitq {
- struct drm_device *dev;
- uint32_t cur_blit_handle;
- uint32_t done_blit_handle;
- unsigned serviced;
- unsigned head;
- unsigned cur;
- unsigned num_free;
- unsigned num_outstanding;
- unsigned long end;
- int aborting;
- int is_active;
- drm_via_sg_info_t *blits[VIA_NUM_BLIT_SLOTS];
- spinlock_t blit_lock;
- wait_queue_head_t blit_queue[VIA_NUM_BLIT_SLOTS];
- wait_queue_head_t busy_queue;
- struct work_struct wq;
- struct timer_list poll_timer;
-} drm_via_blitq_t;
-
-
-/*
- * PCI DMA Registers
- * Channels 2 & 3 don't seem to be implemented in hardware.
- */
-
-#define VIA_PCI_DMA_MAR0 0xE40 /* Memory Address Register of Channel 0 */
-#define VIA_PCI_DMA_DAR0 0xE44 /* Device Address Register of Channel 0 */
-#define VIA_PCI_DMA_BCR0 0xE48 /* Byte Count Register of Channel 0 */
-#define VIA_PCI_DMA_DPR0 0xE4C /* Descriptor Pointer Register of Channel 0 */
-
-#define VIA_PCI_DMA_MAR1 0xE50 /* Memory Address Register of Channel 1 */
-#define VIA_PCI_DMA_DAR1 0xE54 /* Device Address Register of Channel 1 */
-#define VIA_PCI_DMA_BCR1 0xE58 /* Byte Count Register of Channel 1 */
-#define VIA_PCI_DMA_DPR1 0xE5C /* Descriptor Pointer Register of Channel 1 */
-
-#define VIA_PCI_DMA_MAR2 0xE60 /* Memory Address Register of Channel 2 */
-#define VIA_PCI_DMA_DAR2 0xE64 /* Device Address Register of Channel 2 */
-#define VIA_PCI_DMA_BCR2 0xE68 /* Byte Count Register of Channel 2 */
-#define VIA_PCI_DMA_DPR2 0xE6C /* Descriptor Pointer Register of Channel 2 */
-
-#define VIA_PCI_DMA_MAR3 0xE70 /* Memory Address Register of Channel 3 */
-#define VIA_PCI_DMA_DAR3 0xE74 /* Device Address Register of Channel 3 */
-#define VIA_PCI_DMA_BCR3 0xE78 /* Byte Count Register of Channel 3 */
-#define VIA_PCI_DMA_DPR3 0xE7C /* Descriptor Pointer Register of Channel 3 */
-
-#define VIA_PCI_DMA_MR0 0xE80 /* Mode Register of Channel 0 */
-#define VIA_PCI_DMA_MR1 0xE84 /* Mode Register of Channel 1 */
-#define VIA_PCI_DMA_MR2 0xE88 /* Mode Register of Channel 2 */
-#define VIA_PCI_DMA_MR3 0xE8C /* Mode Register of Channel 3 */
-
-#define VIA_PCI_DMA_CSR0 0xE90 /* Command/Status Register of Channel 0 */
-#define VIA_PCI_DMA_CSR1 0xE94 /* Command/Status Register of Channel 1 */
-#define VIA_PCI_DMA_CSR2 0xE98 /* Command/Status Register of Channel 2 */
-#define VIA_PCI_DMA_CSR3 0xE9C /* Command/Status Register of Channel 3 */
-
-#define VIA_PCI_DMA_PTR 0xEA0 /* Priority Type Register */
-
-/* Define for DMA engine */
-/* DPR */
-#define VIA_DMA_DPR_EC (1<<1) /* end of chain */
-#define VIA_DMA_DPR_DDIE (1<<2) /* descriptor done interrupt enable */
-#define VIA_DMA_DPR_DT (1<<3) /* direction of transfer (RO) */
-
-/* MR */
-#define VIA_DMA_MR_CM (1<<0) /* chaining mode */
-#define VIA_DMA_MR_TDIE (1<<1) /* transfer done interrupt enable */
-#define VIA_DMA_MR_HENDMACMD (1<<7) /* ? */
-
-/* CSR */
-#define VIA_DMA_CSR_DE (1<<0) /* DMA enable */
-#define VIA_DMA_CSR_TS (1<<1) /* transfer start */
-#define VIA_DMA_CSR_TA (1<<2) /* transfer abort */
-#define VIA_DMA_CSR_TD (1<<3) /* transfer done */
-#define VIA_DMA_CSR_DD (1<<4) /* descriptor done */
-#define VIA_DMA_DPR_EC (1<<1) /* end of chain */
-
-
-
-#endif
diff --git a/drivers/gpu/drm/via/via_dri1.c b/drivers/gpu/drm/via/via_dri1.c
index 32aae172c6f3..f8b1f837feb1 100644
--- a/drivers/gpu/drm/via/via_dri1.c
+++ b/drivers/gpu/drm/via/via_dri1.c
@@ -32,6 +32,7 @@
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/vmalloc.h>
#include <drm/drm_drv.h>
#include <drm/drm_file.h>
@@ -98,6 +99,62 @@ struct via_memblock {
#define VIA_IRQ_DMA1_DD_PENDING (1 << 6)
#define VIA_IRQ_DMA1_TD_PENDING (1 << 7)
+/*
+ * PCI DMA Registers
+ * Channels 2 & 3 don't seem to be implemented in hardware.
+ */
+
+#define VIA_PCI_DMA_MAR0 0xE40 /* Memory Address Register of Channel 0 */
+#define VIA_PCI_DMA_DAR0 0xE44 /* Device Address Register of Channel 0 */
+#define VIA_PCI_DMA_BCR0 0xE48 /* Byte Count Register of Channel 0 */
+#define VIA_PCI_DMA_DPR0 0xE4C /* Descriptor Pointer Register of Channel 0 */
+
+#define VIA_PCI_DMA_MAR1 0xE50 /* Memory Address Register of Channel 1 */
+#define VIA_PCI_DMA_DAR1 0xE54 /* Device Address Register of Channel 1 */
+#define VIA_PCI_DMA_BCR1 0xE58 /* Byte Count Register of Channel 1 */
+#define VIA_PCI_DMA_DPR1 0xE5C /* Descriptor Pointer Register of Channel 1 */
+
+#define VIA_PCI_DMA_MAR2 0xE60 /* Memory Address Register of Channel 2 */
+#define VIA_PCI_DMA_DAR2 0xE64 /* Device Address Register of Channel 2 */
+#define VIA_PCI_DMA_BCR2 0xE68 /* Byte Count Register of Channel 2 */
+#define VIA_PCI_DMA_DPR2 0xE6C /* Descriptor Pointer Register of Channel 2 */
+
+#define VIA_PCI_DMA_MAR3 0xE70 /* Memory Address Register of Channel 3 */
+#define VIA_PCI_DMA_DAR3 0xE74 /* Device Address Register of Channel 3 */
+#define VIA_PCI_DMA_BCR3 0xE78 /* Byte Count Register of Channel 3 */
+#define VIA_PCI_DMA_DPR3 0xE7C /* Descriptor Pointer Register of Channel 3 */
+
+#define VIA_PCI_DMA_MR0 0xE80 /* Mode Register of Channel 0 */
+#define VIA_PCI_DMA_MR1 0xE84 /* Mode Register of Channel 1 */
+#define VIA_PCI_DMA_MR2 0xE88 /* Mode Register of Channel 2 */
+#define VIA_PCI_DMA_MR3 0xE8C /* Mode Register of Channel 3 */
+
+#define VIA_PCI_DMA_CSR0 0xE90 /* Command/Status Register of Channel 0 */
+#define VIA_PCI_DMA_CSR1 0xE94 /* Command/Status Register of Channel 1 */
+#define VIA_PCI_DMA_CSR2 0xE98 /* Command/Status Register of Channel 2 */
+#define VIA_PCI_DMA_CSR3 0xE9C /* Command/Status Register of Channel 3 */
+
+#define VIA_PCI_DMA_PTR 0xEA0 /* Priority Type Register */
+
+/* Define for DMA engine */
+/* DPR */
+#define VIA_DMA_DPR_EC (1<<1) /* end of chain */
+#define VIA_DMA_DPR_DDIE (1<<2) /* descriptor done interrupt enable */
+#define VIA_DMA_DPR_DT (1<<3) /* direction of transfer (RO) */
+
+/* MR */
+#define VIA_DMA_MR_CM (1<<0) /* chaining mode */
+#define VIA_DMA_MR_TDIE (1<<1) /* transfer done interrupt enable */
+#define VIA_DMA_MR_HENDMACMD (1<<7) /* ? */
+
+/* CSR */
+#define VIA_DMA_CSR_DE (1<<0) /* DMA enable */
+#define VIA_DMA_CSR_TS (1<<1) /* transfer start */
+#define VIA_DMA_CSR_TA (1<<2) /* transfer abort */
+#define VIA_DMA_CSR_TD (1<<3) /* transfer done */
+#define VIA_DMA_CSR_DD (1<<4) /* descriptor done */
+#define VIA_DMA_DPR_EC (1<<1) /* end of chain */
+
/*
* Device-specific IRQs go here. This type might need to be extended with
* the register if there are multiple IRQ control registers.
@@ -127,6 +184,735 @@ static int via_num_unichrome = ARRAY_SIZE(via_unichrome_irqs);
static int via_irqmap_unichrome[] = {-1, -1, -1, 0, -1, 1};
+/*
+ * Unmaps the DMA mappings.
+ * FIXME: Is this a NoOp on x86? Also
+ * FIXME: What happens if this one is called and a pending blit has previously done
+ * the same DMA mappings?
+ */
+#define VIA_PGDN(x) (((unsigned long)(x)) & PAGE_MASK)
+#define VIA_PGOFF(x) (((unsigned long)(x)) & ~PAGE_MASK)
+#define VIA_PFN(x) ((unsigned long)(x) >> PAGE_SHIFT)
+
+typedef struct _drm_via_descriptor {
+ uint32_t mem_addr;
+ uint32_t dev_addr;
+ uint32_t size;
+ uint32_t next;
+} drm_via_descriptor_t;
+
+
+/*
+ * Unmap a DMA mapping.
+ */
+static void
+via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
+{
+ int num_desc = vsg->num_desc;
+ unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page;
+ unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page;
+ drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] +
+ descriptor_this_page;
+ dma_addr_t next = vsg->chain_start;
+
+ while (num_desc--) {
+ if (descriptor_this_page-- == 0) {
+ cur_descriptor_page--;
+ descriptor_this_page = vsg->descriptors_per_page - 1;
+ desc_ptr = vsg->desc_pages[cur_descriptor_page] +
+ descriptor_this_page;
+ }
+ dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE);
+ dma_unmap_page(&pdev->dev, desc_ptr->mem_addr, desc_ptr->size, vsg->direction);
+ next = (dma_addr_t) desc_ptr->next;
+ desc_ptr--;
+ }
+}
+
+/*
+ * If mode = 0, count how many descriptors are needed.
+ * If mode = 1, Map the DMA pages for the device, put together and map also the descriptors.
+ * Descriptors are run in reverse order by the hardware because we are not allowed to update the
+ * 'next' field without syncing calls when the descriptor is already mapped.
+ */
+static void
+via_map_blit_for_device(struct pci_dev *pdev,
+ const drm_via_dmablit_t *xfer,
+ drm_via_sg_info_t *vsg,
+ int mode)
+{
+ unsigned cur_descriptor_page = 0;
+ unsigned num_descriptors_this_page = 0;
+ unsigned char *mem_addr = xfer->mem_addr;
+ unsigned char *cur_mem;
+ unsigned char *first_addr = (unsigned char *)VIA_PGDN(mem_addr);
+ uint32_t fb_addr = xfer->fb_addr;
+ uint32_t cur_fb;
+ unsigned long line_len;
+ unsigned remaining_len;
+ int num_desc = 0;
+ int cur_line;
+ dma_addr_t next = 0 | VIA_DMA_DPR_EC;
+ drm_via_descriptor_t *desc_ptr = NULL;
+
+ if (mode == 1)
+ desc_ptr = vsg->desc_pages[cur_descriptor_page];
+
+ for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) {
+
+ line_len = xfer->line_length;
+ cur_fb = fb_addr;
+ cur_mem = mem_addr;
+
+ while (line_len > 0) {
+
+ remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len);
+ line_len -= remaining_len;
+
+ if (mode == 1) {
+ desc_ptr->mem_addr =
+ dma_map_page(&pdev->dev,
+ vsg->pages[VIA_PFN(cur_mem) -
+ VIA_PFN(first_addr)],
+ VIA_PGOFF(cur_mem), remaining_len,
+ vsg->direction);
+ desc_ptr->dev_addr = cur_fb;
+
+ desc_ptr->size = remaining_len;
+ desc_ptr->next = (uint32_t) next;
+ next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr),
+ DMA_TO_DEVICE);
+ desc_ptr++;
+ if (++num_descriptors_this_page >= vsg->descriptors_per_page) {
+ num_descriptors_this_page = 0;
+ desc_ptr = vsg->desc_pages[++cur_descriptor_page];
+ }
+ }
+
+ num_desc++;
+ cur_mem += remaining_len;
+ cur_fb += remaining_len;
+ }
+
+ mem_addr += xfer->mem_stride;
+ fb_addr += xfer->fb_stride;
+ }
+
+ if (mode == 1) {
+ vsg->chain_start = next;
+ vsg->state = dr_via_device_mapped;
+ }
+ vsg->num_desc = num_desc;
+}
+
+/*
+ * Function that frees up all resources for a blit. It is usable even if the
+ * blit info has only been partially built as long as the status enum is consistent
+ * with the actual status of the used resources.
+ */
+static void
+via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
+{
+ int i;
+
+ switch (vsg->state) {
+ case dr_via_device_mapped:
+ via_unmap_blit_from_device(pdev, vsg);
+ fallthrough;
+ case dr_via_desc_pages_alloc:
+ for (i = 0; i < vsg->num_desc_pages; ++i) {
+ if (vsg->desc_pages[i] != NULL)
+ free_page((unsigned long)vsg->desc_pages[i]);
+ }
+ kfree(vsg->desc_pages);
+ fallthrough;
+ case dr_via_pages_locked:
+ unpin_user_pages_dirty_lock(vsg->pages, vsg->num_pages,
+ (vsg->direction == DMA_FROM_DEVICE));
+ fallthrough;
+ case dr_via_pages_alloc:
+ vfree(vsg->pages);
+ fallthrough;
+ default:
+ vsg->state = dr_via_sg_init;
+ }
+ vfree(vsg->bounce_buffer);
+ vsg->bounce_buffer = NULL;
+ vsg->free_on_sequence = 0;
+}
+
+/*
+ * Fire a blit engine.
+ */
+static void
+via_fire_dmablit(struct drm_device *dev, drm_via_sg_info_t *vsg, int engine)
+{
+ drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
+
+ via_write(dev_priv, VIA_PCI_DMA_MAR0 + engine*0x10, 0);
+ via_write(dev_priv, VIA_PCI_DMA_DAR0 + engine*0x10, 0);
+ via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD |
+ VIA_DMA_CSR_DE);
+ via_write(dev_priv, VIA_PCI_DMA_MR0 + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE);
+ via_write(dev_priv, VIA_PCI_DMA_BCR0 + engine*0x10, 0);
+ via_write(dev_priv, VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start);
+ wmb();
+ via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS);
+ via_read(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04);
+}
+
+/*
+ * Obtain a page pointer array and lock all pages into system memory. A segmentation violation will
+ * occur here if the calling user does not have access to the submitted address.
+ */
+static int
+via_lock_all_dma_pages(drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer)
+{
+ int ret;
+ unsigned long first_pfn = VIA_PFN(xfer->mem_addr);
+ vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) -
+ first_pfn + 1;
+
+ vsg->pages = vzalloc(array_size(sizeof(struct page *), vsg->num_pages));
+ if (NULL == vsg->pages)
+ return -ENOMEM;
+ ret = pin_user_pages_fast((unsigned long)xfer->mem_addr,
+ vsg->num_pages,
+ vsg->direction == DMA_FROM_DEVICE ? FOLL_WRITE : 0,
+ vsg->pages);
+ if (ret != vsg->num_pages) {
+ if (ret < 0)
+ return ret;
+ vsg->state = dr_via_pages_locked;
+ return -EINVAL;
+ }
+ vsg->state = dr_via_pages_locked;
+ DRM_DEBUG("DMA pages locked\n");
+ return 0;
+}
+
+/*
+ * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the
+ * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be
+ * quite large for some blits, and pages don't need to be contiguous.
+ */
+static int
+via_alloc_desc_pages(drm_via_sg_info_t *vsg)
+{
+ int i;
+
+ vsg->descriptors_per_page = PAGE_SIZE / sizeof(drm_via_descriptor_t);
+ vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) /
+ vsg->descriptors_per_page;
+
+ if (NULL == (vsg->desc_pages = kcalloc(vsg->num_desc_pages, sizeof(void *), GFP_KERNEL)))
+ return -ENOMEM;
+
+ vsg->state = dr_via_desc_pages_alloc;
+ for (i = 0; i < vsg->num_desc_pages; ++i) {
+ if (NULL == (vsg->desc_pages[i] =
+ (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL)))
+ return -ENOMEM;
+ }
+ DRM_DEBUG("Allocated %d pages for %d descriptors.\n", vsg->num_desc_pages,
+ vsg->num_desc);
+ return 0;
+}
+
+static void
+via_abort_dmablit(struct drm_device *dev, int engine)
+{
+ drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
+
+ via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TA);
+}
+
+static void
+via_dmablit_engine_off(struct drm_device *dev, int engine)
+{
+ drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
+
+ via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD);
+}
+
+/*
+ * The dmablit part of the IRQ handler. Trying to do only reasonably fast things here.
+ * The rest, like unmapping and freeing memory for done blits is done in a separate workqueue
+ * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while
+ * the workqueue task takes care of processing associated with the old blit.
+ */
+static void
+via_dmablit_handler(struct drm_device *dev, int engine, int from_irq)
+{
+ drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
+ drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
+ int cur;
+ int done_transfer;
+ unsigned long irqsave = 0;
+ uint32_t status = 0;
+
+ DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n",
+ engine, from_irq, (unsigned long) blitq);
+
+ if (from_irq)
+ spin_lock(&blitq->blit_lock);
+ else
+ spin_lock_irqsave(&blitq->blit_lock, irqsave);
+
+ done_transfer = blitq->is_active &&
+ ((status = via_read(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD);
+ done_transfer = done_transfer || (blitq->aborting && !(status & VIA_DMA_CSR_DE));
+
+ cur = blitq->cur;
+ if (done_transfer) {
+
+ blitq->blits[cur]->aborted = blitq->aborting;
+ blitq->done_blit_handle++;
+ wake_up(blitq->blit_queue + cur);
+
+ cur++;
+ if (cur >= VIA_NUM_BLIT_SLOTS)
+ cur = 0;
+ blitq->cur = cur;
+
+ /*
+ * Clear transfer done flag.
+ */
+
+ via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD);
+
+ blitq->is_active = 0;
+ blitq->aborting = 0;
+ schedule_work(&blitq->wq);
+
+ } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) {
+
+ /*
+ * Abort transfer after one second.
+ */
+
+ via_abort_dmablit(dev, engine);
+ blitq->aborting = 1;
+ blitq->end = jiffies + HZ;
+ }
+
+ if (!blitq->is_active) {
+ if (blitq->num_outstanding) {
+ via_fire_dmablit(dev, blitq->blits[cur], engine);
+ blitq->is_active = 1;
+ blitq->cur = cur;
+ blitq->num_outstanding--;
+ blitq->end = jiffies + HZ;
+ if (!timer_pending(&blitq->poll_timer))
+ mod_timer(&blitq->poll_timer, jiffies + 1);
+ } else {
+ if (timer_pending(&blitq->poll_timer))
+ del_timer(&blitq->poll_timer);
+ via_dmablit_engine_off(dev, engine);
+ }
+ }
+
+ if (from_irq)
+ spin_unlock(&blitq->blit_lock);
+ else
+ spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
+}
+
+/*
+ * Check whether this blit is still active, performing necessary locking.
+ */
+static int
+via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_queue_head_t **queue)
+{
+ unsigned long irqsave;
+ uint32_t slot;
+ int active;
+
+ spin_lock_irqsave(&blitq->blit_lock, irqsave);
+
+ /*
+ * Allow for handle wraparounds.
+ */
+
+ active = ((blitq->done_blit_handle - handle) > (1 << 23)) &&
+ ((blitq->cur_blit_handle - handle) <= (1 << 23));
+
+ if (queue && active) {
+ slot = handle - blitq->done_blit_handle + blitq->cur - 1;
+ if (slot >= VIA_NUM_BLIT_SLOTS)
+ slot -= VIA_NUM_BLIT_SLOTS;
+ *queue = blitq->blit_queue + slot;
+ }
+
+ spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
+
+ return active;
+}
+
+/*
+ * Sync. Wait for at least three seconds for the blit to be performed.
+ */
+static int
+via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine)
+{
+
+ drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
+ drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
+ wait_queue_head_t *queue;
+ int ret = 0;
+
+ if (via_dmablit_active(blitq, engine, handle, &queue)) {
+ VIA_WAIT_ON(ret, *queue, 3 * HZ,
+ !via_dmablit_active(blitq, engine, handle, NULL));
+ }
+ DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n",
+ handle, engine, ret);
+
+ return ret;
+}
+
+/*
+ * A timer that regularly polls the blit engine in cases where we don't have interrupts:
+ * a) Broken hardware (typically those that don't have any video capture facility).
+ * b) Blit abort. The hardware doesn't send an interrupt when a blit is aborted.
+ * The timer and hardware IRQ's can and do work in parallel. If the hardware has
+ * irqs, it will shorten the latency somewhat.
+ */
+static void
+via_dmablit_timer(struct timer_list *t)
+{
+ drm_via_blitq_t *blitq = from_timer(blitq, t, poll_timer);
+ struct drm_device *dev = blitq->dev;
+ int engine = (int)
+ (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues);
+
+ DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine,
+ (unsigned long) jiffies);
+
+ via_dmablit_handler(dev, engine, 0);
+
+ if (!timer_pending(&blitq->poll_timer)) {
+ mod_timer(&blitq->poll_timer, jiffies + 1);
+
+ /*
+ * Rerun handler to delete timer if engines are off, and
+ * to shorten abort latency. This is a little nasty.
+ */
+
+ via_dmablit_handler(dev, engine, 0);
+
+ }
+}
+
+/*
+ * Workqueue task that frees data and mappings associated with a blit.
+ * Also wakes up waiting processes. Each of these tasks handles one
+ * blit engine only and may not be called on each interrupt.
+ */
+static void
+via_dmablit_workqueue(struct work_struct *work)
+{
+ drm_via_blitq_t *blitq = container_of(work, drm_via_blitq_t, wq);
+ struct drm_device *dev = blitq->dev;
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+ unsigned long irqsave;
+ drm_via_sg_info_t *cur_sg;
+ int cur_released;
+
+
+ DRM_DEBUG("Workqueue task called for blit engine %ld\n", (unsigned long)
+ (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues));
+
+ spin_lock_irqsave(&blitq->blit_lock, irqsave);
+
+ while (blitq->serviced != blitq->cur) {
+
+ cur_released = blitq->serviced++;
+
+ DRM_DEBUG("Releasing blit slot %d\n", cur_released);
+
+ if (blitq->serviced >= VIA_NUM_BLIT_SLOTS)
+ blitq->serviced = 0;
+
+ cur_sg = blitq->blits[cur_released];
+ blitq->num_free++;
+
+ spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
+
+ wake_up(&blitq->busy_queue);
+
+ via_free_sg_info(pdev, cur_sg);
+ kfree(cur_sg);
+
+ spin_lock_irqsave(&blitq->blit_lock, irqsave);
+ }
+
+ spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
+}
+
+/*
+ * Init all blit engines. Currently we use two, but some hardware have 4.
+ */
+static void
+via_init_dmablit(struct drm_device *dev)
+{
+ int i, j;
+ drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+ drm_via_blitq_t *blitq;
+
+ pci_set_master(pdev);
+
+ for (i = 0; i < VIA_NUM_BLIT_ENGINES; ++i) {
+ blitq = dev_priv->blit_queues + i;
+ blitq->dev = dev;
+ blitq->cur_blit_handle = 0;
+ blitq->done_blit_handle = 0;
+ blitq->head = 0;
+ blitq->cur = 0;
+ blitq->serviced = 0;
+ blitq->num_free = VIA_NUM_BLIT_SLOTS - 1;
+ blitq->num_outstanding = 0;
+ blitq->is_active = 0;
+ blitq->aborting = 0;
+ spin_lock_init(&blitq->blit_lock);
+ for (j = 0; j < VIA_NUM_BLIT_SLOTS; ++j)
+ init_waitqueue_head(blitq->blit_queue + j);
+ init_waitqueue_head(&blitq->busy_queue);
+ INIT_WORK(&blitq->wq, via_dmablit_workqueue);
+ timer_setup(&blitq->poll_timer, via_dmablit_timer, 0);
+ }
+}
+
+/*
+ * Build all info and do all mappings required for a blit.
+ */
+static int
+via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer)
+{
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+ int draw = xfer->to_fb;
+ int ret = 0;
+
+ vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+ vsg->bounce_buffer = NULL;
+
+ vsg->state = dr_via_sg_init;
+
+ if (xfer->num_lines <= 0 || xfer->line_length <= 0) {
+ DRM_ERROR("Zero size bitblt.\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Below check is a driver limitation, not a hardware one. We
+ * don't want to lock unused pages, and don't want to incoporate the
+ * extra logic of avoiding them. Make sure there are no.
+ * (Not a big limitation anyway.)
+ */
+
+ if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) {
+ DRM_ERROR("Too large system memory stride. Stride: %d, "
+ "Length: %d\n", xfer->mem_stride, xfer->line_length);
+ return -EINVAL;
+ }
+
+ if ((xfer->mem_stride == xfer->line_length) &&
+ (xfer->fb_stride == xfer->line_length)) {
+ xfer->mem_stride *= xfer->num_lines;
+ xfer->line_length = xfer->mem_stride;
+ xfer->fb_stride = xfer->mem_stride;
+ xfer->num_lines = 1;
+ }
+
+ /*
+ * Don't lock an arbitrary large number of pages, since that causes a
+ * DOS security hole.
+ */
+
+ if (xfer->num_lines > 2048 || (xfer->num_lines*xfer->mem_stride > (2048*2048*4))) {
+ DRM_ERROR("Too large PCI DMA bitblt.\n");
+ return -EINVAL;
+ }
+
+ /*
+ * we allow a negative fb stride to allow flipping of images in
+ * transfer.
+ */
+
+ if (xfer->mem_stride < xfer->line_length ||
+ abs(xfer->fb_stride) < xfer->line_length) {
+ DRM_ERROR("Invalid frame-buffer / memory stride.\n");
+ return -EINVAL;
+ }
+
+ /*
+ * A hardware bug seems to be worked around if system memory addresses start on
+ * 16 byte boundaries. This seems a bit restrictive however. VIA is contacted
+ * about this. Meanwhile, impose the following restrictions:
+ */
+
+#ifdef VIA_BUGFREE
+ if ((((unsigned long)xfer->mem_addr & 3) != ((unsigned long)xfer->fb_addr & 3)) ||
+ ((xfer->num_lines > 1) && ((xfer->mem_stride & 3) != (xfer->fb_stride & 3)))) {
+ DRM_ERROR("Invalid DRM bitblt alignment.\n");
+ return -EINVAL;
+ }
+#else
+ if ((((unsigned long)xfer->mem_addr & 15) ||
+ ((unsigned long)xfer->fb_addr & 3)) ||
+ ((xfer->num_lines > 1) &&
+ ((xfer->mem_stride & 15) || (xfer->fb_stride & 3)))) {
+ DRM_ERROR("Invalid DRM bitblt alignment.\n");
+ return -EINVAL;
+ }
+#endif
+
+ if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) {
+ DRM_ERROR("Could not lock DMA pages.\n");
+ via_free_sg_info(pdev, vsg);
+ return ret;
+ }
+
+ via_map_blit_for_device(pdev, xfer, vsg, 0);
+ if (0 != (ret = via_alloc_desc_pages(vsg))) {
+ DRM_ERROR("Could not allocate DMA descriptor pages.\n");
+ via_free_sg_info(pdev, vsg);
+ return ret;
+ }
+ via_map_blit_for_device(pdev, xfer, vsg, 1);
+
+ return 0;
+}
+
+/*
+ * Reserve one free slot in the blit queue. Will wait for one second for one
+ * to become available. Otherwise -EBUSY is returned.
+ */
+static int
+via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine)
+{
+ int ret = 0;
+ unsigned long irqsave;
+
+ DRM_DEBUG("Num free is %d\n", blitq->num_free);
+ spin_lock_irqsave(&blitq->blit_lock, irqsave);
+ while (blitq->num_free == 0) {
+ spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
+
+ VIA_WAIT_ON(ret, blitq->busy_queue, HZ, blitq->num_free > 0);
+ if (ret)
+ return (-EINTR == ret) ? -EAGAIN : ret;
+
+ spin_lock_irqsave(&blitq->blit_lock, irqsave);
+ }
+
+ blitq->num_free--;
+ spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
+
+ return 0;
+}
+
+/*
+ * Hand back a free slot if we changed our mind.
+ */
+static void
+via_dmablit_release_slot(drm_via_blitq_t *blitq)
+{
+ unsigned long irqsave;
+
+ spin_lock_irqsave(&blitq->blit_lock, irqsave);
+ blitq->num_free++;
+ spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
+ wake_up(&blitq->busy_queue);
+}
+
+/*
+ * Grab a free slot. Build blit info and queue a blit.
+ */
+static int
+via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer)
+{
+ drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
+ drm_via_sg_info_t *vsg;
+ drm_via_blitq_t *blitq;
+ int ret;
+ int engine;
+ unsigned long irqsave;
+
+ if (dev_priv == NULL) {
+ DRM_ERROR("Called without initialization.\n");
+ return -EINVAL;
+ }
+
+ engine = (xfer->to_fb) ? 0 : 1;
+ blitq = dev_priv->blit_queues + engine;
+ if (0 != (ret = via_dmablit_grab_slot(blitq, engine)))
+ return ret;
+ if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) {
+ via_dmablit_release_slot(blitq);
+ return -ENOMEM;
+ }
+ if (0 != (ret = via_build_sg_info(dev, vsg, xfer))) {
+ via_dmablit_release_slot(blitq);
+ kfree(vsg);
+ return ret;
+ }
+ spin_lock_irqsave(&blitq->blit_lock, irqsave);
+
+ blitq->blits[blitq->head++] = vsg;
+ if (blitq->head >= VIA_NUM_BLIT_SLOTS)
+ blitq->head = 0;
+ blitq->num_outstanding++;
+ xfer->sync.sync_handle = ++blitq->cur_blit_handle;
+
+ spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
+ xfer->sync.engine = engine;
+
+ via_dmablit_handler(dev, engine, 0);
+
+ return 0;
+}
+
+/*
+ * Sync on a previously submitted blit. Note that the X server use signals extensively, and
+ * that there is a very big probability that this IOCTL will be interrupted by a signal. In that
+ * case it returns with -EAGAIN for the signal to be delivered.
+ * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock().
+ */
+static int
+via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv)
+{
+ drm_via_blitsync_t *sync = data;
+ int err;
+
+ if (sync->engine >= VIA_NUM_BLIT_ENGINES)
+ return -EINVAL;
+
+ err = via_dmablit_sync(dev, sync->sync_handle, sync->engine);
+
+ if (-EINTR == err)
+ err = -EAGAIN;
+
+ return err;
+}
+
+/*
+ * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal
+ * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should
+ * be reissued. See the above IOCTL code.
+ */
+static int
+via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv)
+{
+ drm_via_dmablit_t *xfer = data;
+ int err;
+
+ err = via_dmablit(dev, xfer);
+
+ return err;
+}
+
static u32 via_get_vblank_counter(struct drm_device *dev, unsigned int pipe)
{
drm_via_private_t *dev_priv = dev->dev_private;
diff --git a/drivers/gpu/drm/via/via_drv.h b/drivers/gpu/drm/via/via_drv.h
index a1bbe3d5247e..6b26decfadb8 100644
--- a/drivers/gpu/drm/via/via_drv.h
+++ b/drivers/gpu/drm/via/via_drv.h
@@ -24,6 +24,7 @@
#ifndef _VIA_DRV_H_
#define _VIA_DRV_H_
+#include <linux/dma-mapping.h>
#include <linux/irqreturn.h>
#include <linux/jiffies.h>
#include <linux/sched.h>
@@ -47,12 +48,57 @@
#include "via_verifier.h"
-#include "via_dmablit.h"
-
#define VIA_PCI_BUF_SIZE 60000
#define VIA_FIRE_BUF_SIZE 1024
#define VIA_NUM_IRQS 4
+
+#define VIA_NUM_BLIT_ENGINES 2
+#define VIA_NUM_BLIT_SLOTS 8
+
+struct _drm_via_descriptor;
+
+typedef struct _drm_via_sg_info {
+ struct page **pages;
+ unsigned long num_pages;
+ struct _drm_via_descriptor **desc_pages;
+ int num_desc_pages;
+ int num_desc;
+ enum dma_data_direction direction;
+ unsigned char *bounce_buffer;
+ dma_addr_t chain_start;
+ uint32_t free_on_sequence;
+ unsigned int descriptors_per_page;
+ int aborted;
+ enum {
+ dr_via_device_mapped,
+ dr_via_desc_pages_alloc,
+ dr_via_pages_locked,
+ dr_via_pages_alloc,
+ dr_via_sg_init
+ } state;
+} drm_via_sg_info_t;
+
+typedef struct _drm_via_blitq {
+ struct drm_device *dev;
+ uint32_t cur_blit_handle;
+ uint32_t done_blit_handle;
+ unsigned serviced;
+ unsigned head;
+ unsigned cur;
+ unsigned num_free;
+ unsigned num_outstanding;
+ unsigned long end;
+ int aborting;
+ int is_active;
+ drm_via_sg_info_t *blits[VIA_NUM_BLIT_SLOTS];
+ spinlock_t blit_lock;
+ wait_queue_head_t blit_queue[VIA_NUM_BLIT_SLOTS];
+ wait_queue_head_t busy_queue;
+ struct work_struct wq;
+ struct timer_list poll_timer;
+} drm_via_blitq_t;
+
typedef struct drm_via_ring_buffer {
drm_local_map_t map;
char *virtual_start;
@@ -183,9 +229,6 @@ do { \
remove_wait_queue(&(queue), &entry); \
} while (0)
-extern int via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv);
-extern int via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv);
-
extern int via_init_context(struct drm_device *dev, int context);
extern int via_do_cleanup_map(struct drm_device *dev);
@@ -194,7 +237,4 @@ extern int via_dma_cleanup(struct drm_device *dev);
extern void via_init_command_verifier(void);
extern int via_driver_dma_quiescent(struct drm_device *dev);
-extern void via_dmablit_handler(struct drm_device *dev, int engine, int from_irq);
-extern void via_init_dmablit(struct drm_device *dev);
-
#endif
--
2.34.1
More information about the dri-devel
mailing list