[PATCH v2 05/14] drm/mgag200: Store primary plane's color format in CRTC state

Thomas Zimmermann tzimmermann at suse.de
Mon Jul 18 09:27:44 UTC 2022


Store the primary plane's color format in the CRTC state and use
it for programming the CRTC's gamma LUTs.

Gamma tables (i.e., color management) are provided by the CRTC, but
depend in the primary plane's color format. Store the format in the
CRTC state and use it. This has not been an issue with simple-KMS
helpers, which mix-up plane and CRTC state to some extent. For using
regular atomic helpers, it's necessary to distinguish between the two.

Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe at redhat.com>
Tested-by: Jocelyn Falempe <jfalempe at redhat.com>
Acked-by: Sam Ravnborg <sam at ravnborg.org>
---
 drivers/gpu/drm/mgag200/mgag200_drv.h  |  3 +++
 drivers/gpu/drm/mgag200/mgag200_mode.c | 22 ++++++++++++----------
 2 files changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.h b/drivers/gpu/drm/mgag200/mgag200_drv.h
index face2904556a..bf6a01ff9719 100644
--- a/drivers/gpu/drm/mgag200/mgag200_drv.h
+++ b/drivers/gpu/drm/mgag200/mgag200_drv.h
@@ -187,6 +187,9 @@ struct mgag200_pll {
 struct mgag200_crtc_state {
 	struct drm_crtc_state base;
 
+	/* Primary-plane format; required for modesetting and color mgmt. */
+	const struct drm_format_info *format;
+
 	struct mgag200_pll_values pixpllc;
 };
 
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index 0c98742a1b65..bbd1d97a926f 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -419,11 +419,9 @@ static void mgag200_set_offset(struct mga_device *mdev,
 	WREG_ECRT(0x00, crtcext0);
 }
 
-static void mgag200_set_format_regs(struct mga_device *mdev,
-				    const struct drm_framebuffer *fb)
+static void mgag200_set_format_regs(struct mga_device *mdev, const struct drm_format_info *format)
 {
 	struct drm_device *dev = &mdev->base;
-	const struct drm_format_info *format = fb->format;
 	unsigned int bpp, bppshift, scale;
 	u8 crtcext3, xmulctrl;
 
@@ -502,7 +500,7 @@ static void mgag200_g200er_reset_tagfifo(struct mga_device *mdev)
 
 static void mgag200_g200se_set_hiprilvl(struct mga_device *mdev,
 					const struct drm_display_mode *mode,
-					const struct drm_framebuffer *fb)
+					const struct drm_format_info *format)
 {
 	struct mgag200_g200se_device *g200se = to_mgag200_g200se_device(&mdev->base);
 	unsigned int hiprilvl;
@@ -514,9 +512,9 @@ static void mgag200_g200se_set_hiprilvl(struct mga_device *mdev,
 		unsigned int bpp;
 		unsigned long mb;
 
-		if (fb->format->cpp[0] * 8 > 16)
+		if (format->cpp[0] * 8 > 16)
 			bpp = 32;
-		else if (fb->format->cpp[0] * 8 > 8)
+		else if (format->cpp[0] * 8 > 8)
 			bpp = 16;
 		else
 			bpp = 8;
@@ -696,6 +694,7 @@ mgag200_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
 	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
 	struct mgag200_crtc_state *mgag200_crtc_state = to_mgag200_crtc_state(crtc_state);
 	struct drm_framebuffer *fb = plane_state->fb;
+	const struct drm_format_info *format = mgag200_crtc_state->format;
 	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
 	struct drm_rect fullscreen = {
 		.x1 = 0,
@@ -707,7 +706,7 @@ mgag200_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
 	if (mdev->type == G200_WB || mdev->type == G200_EW3)
 		mgag200_g200wb_hold_bmc(mdev);
 
-	mgag200_set_format_regs(mdev, fb);
+	mgag200_set_format_regs(mdev, format);
 	mgag200_set_mode_regs(mdev, adjusted_mode);
 
 	pixpll->funcs->update(pixpll, &mgag200_crtc_state->pixpllc);
@@ -716,7 +715,7 @@ mgag200_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
 		mgag200_g200er_reset_tagfifo(mdev);
 
 	if (IS_G200_SE(mdev))
-		mgag200_g200se_set_hiprilvl(mdev, adjusted_mode, fb);
+		mgag200_g200se_set_hiprilvl(mdev, adjusted_mode, format);
 	else if (mdev->type == G200_EV)
 		mgag200_g200ev_set_hiprilvl(mdev);
 
@@ -724,9 +723,9 @@ mgag200_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
 		mgag200_g200wb_release_bmc(mdev);
 
 	if (crtc_state->gamma_lut)
-		mgag200_crtc_set_gamma(mdev, fb->format, crtc_state->gamma_lut->data);
+		mgag200_crtc_set_gamma(mdev, format, crtc_state->gamma_lut->data);
 	else
-		mgag200_crtc_set_gamma_linear(mdev, fb->format);
+		mgag200_crtc_set_gamma_linear(mdev, format);
 
 	mgag200_enable_display(mdev);
 
@@ -769,6 +768,8 @@ mgag200_simple_display_pipe_check(struct drm_simple_display_pipe *pipe,
 	if (!fb || (fb->format != new_fb->format))
 		crtc_state->mode_changed = true; /* update PLL settings */
 
+	mgag200_crtc_state->format = new_fb->format;
+
 	if (crtc_state->mode_changed) {
 		ret = pixpll->funcs->compute(pixpll, crtc_state->mode.clock,
 					     &mgag200_crtc_state->pixpllc);
@@ -832,6 +833,7 @@ mgag200_simple_display_pipe_duplicate_crtc_state(struct drm_simple_display_pipe
 		return NULL;
 	__drm_atomic_helper_crtc_duplicate_state(crtc, &new_mgag200_crtc_state->base);
 
+	new_mgag200_crtc_state->format = mgag200_crtc_state->format;
 	memcpy(&new_mgag200_crtc_state->pixpllc, &mgag200_crtc_state->pixpllc,
 	       sizeof(new_mgag200_crtc_state->pixpllc));
 
-- 
2.36.1



More information about the dri-devel mailing list