[PATCH v5 1/2] drm/panfrost: Add specific register offset macros for JS and MMU AS
Adrián Larumbe
adrian.larumbe at collabora.com
Mon Jul 18 17:24:17 UTC 2022
Each Panfrost job has its own job slot and MMU address space set of
registers, which are selected with a job-specific index.
Turn the shift and stride used for selection of the right register set base
into a define rather than using magic numbers.
Signed-off-by: Adrián Larumbe <adrian.larumbe at collabora.com>
---
drivers/gpu/drm/panfrost/panfrost_regs.h | 42 ++++++++++++++----------
1 file changed, 24 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/panfrost/panfrost_regs.h b/drivers/gpu/drm/panfrost/panfrost_regs.h
index accb4fa3adb8..3574c0513129 100644
--- a/drivers/gpu/drm/panfrost/panfrost_regs.h
+++ b/drivers/gpu/drm/panfrost/panfrost_regs.h
@@ -226,23 +226,25 @@
#define JOB_INT_MASK_DONE(j) BIT(j)
#define JS_BASE 0x1800
-#define JS_HEAD_LO(n) (JS_BASE + ((n) * 0x80) + 0x00)
-#define JS_HEAD_HI(n) (JS_BASE + ((n) * 0x80) + 0x04)
-#define JS_TAIL_LO(n) (JS_BASE + ((n) * 0x80) + 0x08)
-#define JS_TAIL_HI(n) (JS_BASE + ((n) * 0x80) + 0x0c)
-#define JS_AFFINITY_LO(n) (JS_BASE + ((n) * 0x80) + 0x10)
-#define JS_AFFINITY_HI(n) (JS_BASE + ((n) * 0x80) + 0x14)
-#define JS_CONFIG(n) (JS_BASE + ((n) * 0x80) + 0x18)
-#define JS_XAFFINITY(n) (JS_BASE + ((n) * 0x80) + 0x1c)
-#define JS_COMMAND(n) (JS_BASE + ((n) * 0x80) + 0x20)
-#define JS_STATUS(n) (JS_BASE + ((n) * 0x80) + 0x24)
-#define JS_HEAD_NEXT_LO(n) (JS_BASE + ((n) * 0x80) + 0x40)
-#define JS_HEAD_NEXT_HI(n) (JS_BASE + ((n) * 0x80) + 0x44)
-#define JS_AFFINITY_NEXT_LO(n) (JS_BASE + ((n) * 0x80) + 0x50)
-#define JS_AFFINITY_NEXT_HI(n) (JS_BASE + ((n) * 0x80) + 0x54)
-#define JS_CONFIG_NEXT(n) (JS_BASE + ((n) * 0x80) + 0x58)
-#define JS_COMMAND_NEXT(n) (JS_BASE + ((n) * 0x80) + 0x60)
-#define JS_FLUSH_ID_NEXT(n) (JS_BASE + ((n) * 0x80) + 0x70)
+#define JS_SLOT_STRIDE 0x80
+
+#define JS_HEAD_LO(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x00)
+#define JS_HEAD_HI(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x04)
+#define JS_TAIL_LO(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x08)
+#define JS_TAIL_HI(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x0c)
+#define JS_AFFINITY_LO(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x10)
+#define JS_AFFINITY_HI(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x14)
+#define JS_CONFIG(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x18)
+#define JS_XAFFINITY(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x1c)
+#define JS_COMMAND(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x20)
+#define JS_STATUS(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x24)
+#define JS_HEAD_NEXT_LO(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x40)
+#define JS_HEAD_NEXT_HI(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x44)
+#define JS_AFFINITY_NEXT_LO(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x50)
+#define JS_AFFINITY_NEXT_HI(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x54)
+#define JS_CONFIG_NEXT(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x58)
+#define JS_COMMAND_NEXT(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x60)
+#define JS_FLUSH_ID_NEXT(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x70)
/* Possible values of JS_CONFIG and JS_CONFIG_NEXT registers */
#define JS_CONFIG_START_FLUSH_CLEAN BIT(8)
@@ -281,7 +283,9 @@
#define AS_COMMAND_FLUSH_MEM 0x05 /* Wait for memory accesses to complete, flush all the L1s cache then
flush all L2 caches then issue a flush region command to all MMUs */
-#define MMU_AS(as) (0x2400 + ((as) << 6))
+#define MMU_BASE 0x2400
+#define MMU_AS_SHIFT 0x06
+#define MMU_AS(as) (MMU_BASE + ((as) << MMU_AS_SHIFT))
#define AS_TRANSTAB_LO(as) (MMU_AS(as) + 0x00) /* (RW) Translation Table Base Address for address space n, low word */
#define AS_TRANSTAB_HI(as) (MMU_AS(as) + 0x04) /* (RW) Translation Table Base Address for address space n, high word */
@@ -300,6 +304,8 @@
#define AS_FAULTEXTRA_LO(as) (MMU_AS(as) + 0x38) /* (RO) Secondary fault address for address space n, low word */
#define AS_FAULTEXTRA_HI(as) (MMU_AS(as) + 0x3C) /* (RO) Secondary fault address for address space n, high word */
+#define MMU_AS_STRIDE 0x40 /* Increase when adding new AS registers */
+
/*
* Begin LPAE MMU TRANSTAB register values
*/
--
2.37.0
More information about the dri-devel
mailing list