[PATCH] drm/amd: Fix typo 'the the' in comment

[Slark Xiao]

Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao at 163.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 2 +-
 drivers/gpu/drm/amd/include/atombios.h    | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
index ff659d4f772b..8adeb7469f1e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
@@ -47,7 +47,7 @@
  * for GPU/CPU synchronization.  When the fence is written,
  * it is expected that all buffers associated with that fence
  * are no longer in use by the associated ring on the GPU and
- * that the the relevant GPU caches have been flushed.
+ * that the relevant GPU caches have been flushed.
  */
 
 struct amdgpu_fence {
diff --git a/drivers/gpu/drm/amd/include/atombios.h b/drivers/gpu/drm/amd/include/atombios.h
index 1f9df4e7509b..15943bc21bc5 100644
--- a/drivers/gpu/drm/amd/include/atombios.h
+++ b/drivers/gpu/drm/amd/include/atombios.h
@@ -3255,8 +3255,8 @@ ucMaxNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of  t
 ucMinNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
 
 
-usInterNBVoltageLow:    Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
-usInterNBVoltageHigh:   Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageLow:    Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
+usInterNBVoltageHigh:   Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
 */
 
 
-- 
2.25.1