[PATCH] drm/bridge: parade-ps8640: Fix regulator supply order

[Neil Armstrong]

On 21/07/2022 11:22, Chen-Yu Tsai wrote:
> The datasheet says that VDD12 must be enabled and at full voltage before
> VDD33 is enabled.
> 
> Reorder the bulk regulator supply names so that VDD12 is enabled before
> VDD33. Any enable ramp delays should be handled by setting proper
> constraints on the regulators.
> 
> Fixes: bc1aee7fc8f0 ("drm/bridge: Add I2C based driver for ps8640 bridge")
> Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> ---
>   drivers/gpu/drm/bridge/parade-ps8640.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
> index 31e88cb39f8a..49107a6cdac1 100644
> --- a/drivers/gpu/drm/bridge/parade-ps8640.c
> +++ b/drivers/gpu/drm/bridge/parade-ps8640.c
> @@ -631,8 +631,8 @@ static int ps8640_probe(struct i2c_client *client)
>   	if (!ps_bridge)
>   		return -ENOMEM;
>   
> -	ps_bridge->supplies[0].supply = "vdd33";
> -	ps_bridge->supplies[1].supply = "vdd12";
> +	ps_bridge->supplies[0].supply = "vdd12";
> +	ps_bridge->supplies[1].supply = "vdd33";
>   	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ps_bridge->supplies),
>   				      ps_bridge->supplies);
>   	if (ret)

Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>