[PATCH v16 0/3] eDP/DP Phy vdda realted function

[Doug Anderson]

Hi,

On Thu, Jul 21, 2022 at 7:52 AM Doug Anderson <dianders at chromium.org> wrote:
>
> Hi,
>
> On Thu, Jul 21, 2022 at 7:39 AM Doug Anderson <dianders at chromium.org> wrote:
> >
> > > You could add a way to specify constant base loads in DT on either a per
> > > regulator or per consumer basis.
> >
> > Yes, this please! ...on a per consumer basis. :-) It's been on my
> > wishlist for a while and would eliminate a massive amount of code /
> > tables in the drivers.
> >
> > We could debate syntax, but I guess you'd either do it w/ two cells
> >
> > vdda-phy-supply = <&vdda_mipi_dsi0_1p2 21800>;
> >
> > ...or with matching properties:
> >
> > vdda-phy-supply = <&vdda_mipi_dsi0_1p2>;
> > vdda-phy-supply-base-load = <21800>;
>
> Ah, sorry to respond to my own thread so quickly, but I just thought
> of a reason for the "matching properties" solution instead of the two
> cells. It would allow the SoC "dtsi" file to specify a base load while
> the board "dts" file can then specify the supply. That feels like it
> could be a nice solution.

This seemed easy, so I whipped up a quick prototype. Forewarned that I
did very little detailed testing. I didn't CC everyone on this thread,
but hopefully folks can find it if they are interested...

https://lore.kernel.org/r/20220721182622.RFC.1.I8a64b707169cfd73d9309c5eaf5d43b8bc4db988@changeid

-Doug