[PATCH v4 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings
Biju Das
biju.das.jz at bp.renesas.com
Fri Jul 22 19:19:23 UTC 2022
The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. It
can operate in DSI mode, with up to four data lanes.
Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
Reviewed-by: Rob Herring <robh at kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
v3->v4:
* No change.
v2->v3:
* Added Rb tag from Geert and Laurent
* Fixed the typo "Receive" -> "transmit"
* Added accepible values for data-lanes
* Sorted Header file in the example
* Added SoC specific compaible along with generic one.
v1->v2:
* Added full path for dsi-controller.yaml
* Modeled DSI + D-PHY as single block and updated reg property
* Fixed typo D_PHY->D-PHY
* Updated description
* Added interrupts and interrupt-names and updated the example
RFC->v1:
* Added a ref to dsi-controller.yaml.
RFC:-
* https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.10773-22-biju.das.jz@bp.renesas.com/
---
.../bindings/display/bridge/renesas,dsi.yaml | 182 ++++++++++++++++++
1 file changed, 182 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
new file mode 100644
index 000000000000..131d5b63ec4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L MIPI DSI Encoder
+
+maintainers:
+ - Biju Das <biju.das.jz at bp.renesas.com>
+
+description: |
+ This binding describes the MIPI DSI encoder embedded in the Renesas
+ RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with
+ up to four data lanes.
+
+allOf:
+ - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC}
+ - const: renesas,rzg2l-mipi-dsi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: Sequence operation channel 0 interrupt
+ - description: Sequence operation channel 1 interrupt
+ - description: Video-Input operation channel 1 interrupt
+ - description: DSI Packet Receive interrupt
+ - description: DSI Fatal Error interrupt
+ - description: DSI D-PHY PPI interrupt
+ - description: Debug interrupt
+
+ interrupt-names:
+ items:
+ - const: seq0
+ - const: seq1
+ - const: vin1
+ - const: rcv
+ - const: ferr
+ - const: ppi
+ - const: debug
+
+ clocks:
+ items:
+ - description: DSI D-PHY PLL multiplied clock
+ - description: DSI D-PHY system clock
+ - description: DSI AXI bus clock
+ - description: DSI Register access clock
+ - description: DSI Video clock
+ - description: DSI D-PHY Escape mode transmit clock
+
+ clock-names:
+ items:
+ - const: pllclk
+ - const: sysclk
+ - const: aclk
+ - const: pclk
+ - const: vclk
+ - const: lpclk
+
+ resets:
+ items:
+ - description: MIPI_DSI_CMN_RSTB
+ - description: MIPI_DSI_ARESET_N
+ - description: MIPI_DSI_PRESET_N
+
+ reset-names:
+ items:
+ - const: rst
+ - const: arst
+ - const: prst
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Parallel input port
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: DSI output port
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description: array of physical DSI data lane indexes.
+ minItems: 1
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ required:
+ - data-lanes
+
+ required:
+ - port at 0
+ - port at 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ dsi0: dsi at 10850000 {
+ compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
+ reg = <0x10850000 0x20000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "seq0", "seq1", "vin1", "rcv",
+ "ferr", "ppi", "debug";
+ clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+ clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+ resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+ <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+ <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+ reset-names = "rst", "arst", "prst";
+ power-domains = <&cpg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&du_out_dsi0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&adv7535_in>;
+ };
+ };
+ };
+ };
+...
--
2.25.1
More information about the dri-devel
mailing list