[PATCH libdrm v1 2/2] tests/modetest: Add support for writeback connector
Rohith Iyer
quic_rohiiyer at quicinc.com
Mon Jul 25 19:26:39 UTC 2022
Add writeback support to modetest with the below options:
- Passing in -c will now also show the writeback connector
- Test a built-in mode on writeback connector
- Test a custom mode from user input on writeback connector
Usage: "./modetest -M msm -x <connector_id>:<mode_parameters>
-a -P <plane_id>@<crtc_id>:<widthxheight>+0+0 at RG24."
Refer to --help for exact syntax
- Dump the writeback output buffer to bitstream
Usage: "./modetest -M msm -s <connector_id>:<widthxheight>
-a -o <filepath>
-P <plane_id>@<crtc_id>:<widthxheight>+0+0 at RG24"
This currently supports a singular writeback connector.
Signed-off-by: Rohith Iyer <quic_rohiiyer at quicinc.com>
---
tests/modetest/buffers.c | 19 ++++++
tests/modetest/buffers.h | 1 +
tests/modetest/modetest.c | 124 ++++++++++++++++++++++++++++++++------
3 files changed, 125 insertions(+), 19 deletions(-)
diff --git a/tests/modetest/buffers.c b/tests/modetest/buffers.c
index 8a8d9e01..279d7b28 100644
--- a/tests/modetest/buffers.c
+++ b/tests/modetest/buffers.c
@@ -353,3 +353,22 @@ void bo_destroy(struct bo *bo)
free(bo);
}
+
+void bo_dump(struct bo *bo, const char *filename)
+{
+ FILE *fp;
+
+ if (!bo || !filename)
+ return;
+
+ fp = fopen(filename, "wb");
+ if (fp) {
+ void *addr;
+
+ bo_map(bo, &addr);
+ printf("Dumping buffer %p to file %s.\n", bo->ptr, filename);
+ fwrite(bo->ptr, 1, bo->size, fp);
+ bo_unmap(bo);
+ fclose(fp);
+ }
+}
diff --git a/tests/modetest/buffers.h b/tests/modetest/buffers.h
index 7f95396b..cbd54e9e 100644
--- a/tests/modetest/buffers.h
+++ b/tests/modetest/buffers.h
@@ -36,5 +36,6 @@ struct bo *bo_create(int fd, unsigned int format,
unsigned int handles[4], unsigned int pitches[4],
unsigned int offsets[4], enum util_fill_pattern pattern);
void bo_destroy(struct bo *bo);
+void bo_dump(struct bo *bo, const char *filename);
#endif
diff --git a/tests/modetest/modetest.c b/tests/modetest/modetest.c
index f33f303c..beda78c7 100644
--- a/tests/modetest/modetest.c
+++ b/tests/modetest/modetest.c
@@ -70,6 +70,7 @@
static enum util_fill_pattern primary_fill = UTIL_PATTERN_SMPTE;
static enum util_fill_pattern secondary_fill = UTIL_PATTERN_TILES;
+static enum util_fill_pattern plain_fill = UTIL_PATTERN_PLAIN;
struct crtc {
drmModeCrtc *crtc;
@@ -135,6 +136,11 @@ static inline int64_t U642I64(uint64_t val)
return (int64_t)*((int64_t *)&val);
}
+static inline uint64_t to_user_pointer(const void *ptr)
+{
+ return (uintptr_t)ptr;
+}
+
static float mode_vrefresh(drmModeModeInfo *mode)
{
return mode->clock * 1000.00
@@ -813,6 +819,10 @@ struct pipe_arg {
struct crtc *crtc;
unsigned int fb_id[2], current_fb_id;
struct timeval start;
+ unsigned int out_fb_id;
+ struct bo *out_bo;
+ bool custom;
+ bool dump;
int swap_count;
};
@@ -919,27 +929,43 @@ static struct crtc *pipe_find_crtc(struct device *dev, struct pipe_arg *pipe)
return &dev->resources->crtcs[crtc_idx - 1];
}
+static int parse_mode_string(char *mode_string, drmModeModeInfo *user_mode)
+{
+ return sscanf(mode_string, "%u,%hu,%hu,%hu,%hu,%hu,%hu,%hu,%hu,%hu,%hu,%u,%s",
+ &user_mode->clock, &user_mode->hdisplay, &user_mode->hsync_start,
+ &user_mode->hsync_end, &user_mode->htotal, &user_mode->hskew,
+ &user_mode->vdisplay, &user_mode->vsync_start, &user_mode->vsync_end,
+ &user_mode->vtotal, &user_mode->vscan, &user_mode->vrefresh,
+ user_mode->name);
+}
+
static int pipe_find_crtc_and_mode(struct device *dev, struct pipe_arg *pipe)
{
drmModeModeInfo *mode = NULL;
int i;
+ static drmModeModeInfo user_mode;
- pipe->mode = NULL;
-
- for (i = 0; i < (int)pipe->num_cons; i++) {
- mode = connector_find_mode(dev, pipe->con_ids[i],
- pipe->mode_str, pipe->vrefresh);
- if (mode == NULL) {
- if (pipe->vrefresh)
- fprintf(stderr,
- "failed to find mode "
- "\"%s-%.2fHz\" for connector %s\n",
- pipe->mode_str, pipe->vrefresh, pipe->cons[i]);
- else
- fprintf(stderr,
- "failed to find mode \"%s\" for connector %s\n",
- pipe->mode_str, pipe->cons[i]);
+ if (pipe->custom) {
+ if (parse_mode_string(pipe->mode_str, &user_mode) == 13)
+ mode = &user_mode;
+ else
return -EINVAL;
+ } else {
+ for (i = 0; i < (int)pipe->num_cons; i++) {
+ mode = connector_find_mode(dev, pipe->con_ids[i],
+ pipe->mode_str, pipe->vrefresh);
+ if (mode == NULL) {
+ if (pipe->vrefresh)
+ fprintf(stderr,
+ "failed to find mode "
+ "\"%s-%.2fHz\" for connector %s\n",
+ pipe->mode_str, pipe->vrefresh, pipe->cons[i]);
+ else
+ fprintf(stderr,
+ "failed to find mode \"%s\" for connector %s\n",
+ pipe->mode_str, pipe->cons[i]);
+ return -EINVAL;
+ }
}
}
@@ -1664,6 +1690,45 @@ static void set_mode(struct device *dev, struct pipe_arg *pipes, unsigned int co
}
}
+static void writeback_config(struct device *dev, struct pipe_arg *pipes, unsigned int count)
+{
+ int32_t *out_fence_ptr;
+ drmModeConnector *connector;
+
+ for (int j = 0; j < count; j++) {
+ struct pipe_arg *pipe = &pipes[j];
+
+ for (int i = 0; i < pipe->num_cons; i++) {
+ connector = get_connector_by_id(dev, pipe->con_ids[i]);
+ if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) {
+ bo_fb_create(dev->fd, pipes[j].fourcc, pipe->mode->hdisplay,
+ pipe->mode->vdisplay, plain_fill, &pipe->out_bo,
+ &pipe->out_fb_id);
+ add_property(dev, pipe->con_ids[i], "WRITEBACK_FB_ID",
+ pipe->out_fb_id);
+ add_property(dev, pipe->con_ids[i], "WRITEBACK_OUT_FENCE_PTR",
+ to_user_pointer(out_fence_ptr));
+ }
+ }
+ }
+}
+
+static void dump_output_fb(struct device *dev, struct pipe_arg *pipes, char *dump_path,
+ unsigned int count)
+{
+ drmModeConnector *connector;
+
+ for (int j = 0; j < count; j++) {
+ struct pipe_arg *pipe = &pipes[j];
+
+ for (int i = 0; i < pipe->num_cons; i++) {
+ connector = get_connector_by_id(dev, pipe->con_ids[i]);
+ if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
+ bo_dump(pipe->out_bo, dump_path);
+ }
+ }
+}
+
static void atomic_clear_mode(struct device *dev, struct pipe_arg *pipes, unsigned int count)
{
unsigned int i;
@@ -1992,7 +2057,7 @@ static void parse_fill_patterns(char *arg)
static void usage(char *name)
{
- fprintf(stderr, "usage: %s [-acDdefMPpsCvrw]\n", name);
+ fprintf(stderr, "usage: %s [-acDdefMPpsCvrwx]\n", name);
fprintf(stderr, "\n Query options:\n\n");
fprintf(stderr, "\t-c\tlist connectors\n");
@@ -2002,7 +2067,12 @@ static void usage(char *name)
fprintf(stderr, "\n Test options:\n\n");
fprintf(stderr, "\t-P <plane_id>@<crtc_id>:<w>x<h>[+<x>+<y>][*<scale>][@<format>]\tset a plane\n");
- fprintf(stderr, "\t-s <connector_id>[,<connector_id>][@<crtc_id>]:[#<mode index>]<mode>[-<vrefresh>][@<format>]\tset a mode\n");
+ fprintf(stderr, "\t-s <connector_id>[,<connector_id>][@<crtc_id>]:[#<mode index>]");
+ fprintf(stderr, "<mode>[-<vrefresh>][@<format>]\tset a built-in mode\n");
+ fprintf(stderr, "\t-x <connector_id>[@<crtc_id>]:<clock,hdisplay,hsyncstart,hsyncend,");
+ fprintf(stderr, "htotal,hskew,vdisplay,vsyncstart,vsyncend,vtotal,vscan,");
+ fprintf(stderr, "vrefresh,name>\tset a custom mode\n");
+ fprintf(stderr, "\t-o <desired file path> \t Dump output buffer to file\n");
fprintf(stderr, "\t-C\ttest hw cursor\n");
fprintf(stderr, "\t-v\ttest vsynced page flipping\n");
fprintf(stderr, "\t-r\tset the preferred mode for all connectors\n");
@@ -2019,7 +2089,7 @@ static void usage(char *name)
exit(0);
}
-static char optstr[] = "acdD:efF:M:P:ps:Cvrw:";
+static const char optstr[] = "acdD:efF:M:o:P:ps:Cvrw:x:";
int main(int argc, char **argv)
{
@@ -2042,6 +2112,7 @@ int main(int argc, char **argv)
struct property_arg *prop_args = NULL;
unsigned int args = 0;
int ret;
+ char *dump_path;
memset(&dev, 0, sizeof dev);
@@ -2080,6 +2151,10 @@ int main(int argc, char **argv)
/* Preserve the default behaviour of dumping all information. */
args--;
break;
+ case 'o':
+ pipe_args->dump = true;
+ dump_path = optarg;
+ break;
case 'P':
plane_args = realloc(plane_args,
(plane_count + 1) * sizeof *plane_args);
@@ -2098,6 +2173,7 @@ int main(int argc, char **argv)
crtcs = 1;
planes = 1;
break;
+ case 'x':
case 's':
pipe_args = realloc(pipe_args,
(count + 1) * sizeof *pipe_args);
@@ -2109,7 +2185,7 @@ int main(int argc, char **argv)
if (parse_connector(&pipe_args[count], optarg) < 0)
usage(argv[0]);
-
+ pipe_args->custom = (c == 'x');
count++;
break;
case 'C':
@@ -2165,6 +2241,7 @@ int main(int argc, char **argv)
if (use_atomic) {
ret = drmSetClientCap(dev.fd, DRM_CLIENT_CAP_ATOMIC, 1);
+ drmSetClientCap(dev.fd, DRM_CLIENT_CAP_WRITEBACK_CONNECTORS, 1);
if (ret) {
fprintf(stderr, "no atomic modesetting support: %s\n", strerror(errno));
drmClose(dev.fd);
@@ -2208,6 +2285,8 @@ int main(int argc, char **argv)
if (set_preferred || count)
set_mode(&dev, pipe_args, count);
+ writeback_config(&dev, pipe_args, count);
+
if (plane_count)
atomic_set_planes(&dev, plane_args, plane_count, false);
@@ -2217,6 +2296,13 @@ int main(int argc, char **argv)
return 1;
}
+ /*
+ * Since only writeback connectors have an output fb, this should only be
+ * called for writeback.
+ */
+ if (pipe_args->dump)
+ dump_output_fb(&dev, pipe_args, dump_path, count);
+
if (test_vsync)
atomic_test_page_flip(&dev, pipe_args, plane_args, plane_count);
--
2.31.0
More information about the dri-devel
mailing list