[PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
Markuss Broks
markuss.broks at gmail.com
Thu Jul 28 14:28:19 UTC 2022
Add early console support for generic linear framebuffer devices.
This driver supports probing from cmdline early parameters
or from the device-tree using information in simple-framebuffer node.
The EFI functionality should be retained in whole.
The driver was disabled on ARM because of a bug in early_ioremap
implementation on ARM.
Signed-off-by: Markuss Broks <markuss.broks at gmail.com>
---
.../admin-guide/kernel-parameters.txt | 12 +-
MAINTAINERS | 5 +
drivers/firmware/efi/Kconfig | 6 +-
drivers/firmware/efi/Makefile | 1 -
drivers/firmware/efi/earlycon.c | 246 --------------
drivers/video/fbdev/Kconfig | 11 +
drivers/video/fbdev/Makefile | 1 +
drivers/video/fbdev/earlycon.c | 301 ++++++++++++++++++
8 files changed, 327 insertions(+), 256 deletions(-)
delete mode 100644 drivers/firmware/efi/earlycon.c
create mode 100644 drivers/video/fbdev/earlycon.c
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 8090130b544b0701237a7b657a29c83c000a60f4..22a8625bb342f95e731fcc3a24390fca2c0f194c 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1281,12 +1281,9 @@
specified address. The serial port must already be
setup and configured. Options are not yet supported.
- efifb,[options]
+ efifb
Start an early, unaccelerated console on the EFI
- memory mapped framebuffer (if available). On cache
- coherent non-x86 systems that use system memory for
- the framebuffer, pass the 'ram' option so that it is
- mapped with the correct attributes.
+ memory mapped framebuffer (if available).
linflex,<addr>
Use early console provided by Freescale LINFlexD UART
@@ -1294,6 +1291,11 @@
address must be provided, and the serial port must
already be setup and configured.
+ simplefb,<addr>,<width>,<height>,<bpp>
+ Use early console with simple framebuffer that is
+ pre-initialized by firmware. A valid base address,
+ width, height and pixel size must be provided.
+
earlyprintk= [X86,SH,ARM,M68k,S390]
earlyprintk=vga
earlyprintk=sclp
diff --git a/MAINTAINERS b/MAINTAINERS
index 1fc9ead83d2aa3e60ccc4cfa8ee16df09ef579bf..140dee7f6920197a895d310afdde67a0de474522 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7033,6 +7033,11 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/
T: git git://linuxtv.org/anttip/media_tree.git
F: drivers/media/tuners/e4000*
+EARLY CONSOLE FRAMEBUFFER DRIVER
+M: Markuss Broks <markuss.broks at gmail.com>
+S: Maintained
+F: drivers/video/fbdev/earlycon.c
+
EARTH_PT1 MEDIA DRIVER
M: Akihiro Tsukada <tskd08 at gmail.com>
L: linux-media at vger.kernel.org
diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
index 7aa4717cdcac46f91dd202f868c463388eb02735..56241b2e19383d70387f07114a27bb4f33ac7857 100644
--- a/drivers/firmware/efi/Kconfig
+++ b/drivers/firmware/efi/Kconfig
@@ -259,10 +259,8 @@ config EFI_DISABLE_PCI_DMA
may be used to override this option.
config EFI_EARLYCON
- def_bool y
- depends on SERIAL_EARLYCON && !ARM && !IA64
- select FONT_SUPPORT
- select ARCH_USE_MEMREMAP_PROT
+ bool "EFI early console support"
+ depends on FB_EARLYCON && !IA64
config EFI_CUSTOM_SSDT_OVERLAYS
bool "Load custom ACPI SSDT overlay from an EFI variable"
diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
index c02ff25dd47707090a2ab86ee4f330e467f878f5..64eea61fbb43d76ec2d5416d467dfbb9aa21bda0 100644
--- a/drivers/firmware/efi/Makefile
+++ b/drivers/firmware/efi/Makefile
@@ -44,6 +44,5 @@ obj-$(CONFIG_ARM64) += $(arm-obj-y)
riscv-obj-$(CONFIG_EFI) := efi-init.o riscv-runtime.o
obj-$(CONFIG_RISCV) += $(riscv-obj-y)
obj-$(CONFIG_EFI_CAPSULE_LOADER) += capsule-loader.o
-obj-$(CONFIG_EFI_EARLYCON) += earlycon.o
obj-$(CONFIG_UEFI_CPER_ARM) += cper-arm.o
obj-$(CONFIG_UEFI_CPER_X86) += cper-x86.o
diff --git a/drivers/firmware/efi/earlycon.c b/drivers/firmware/efi/earlycon.c
deleted file mode 100644
index a52236e11e5f73ddea5bb1f42ca2ca7c42425dab..0000000000000000000000000000000000000000
--- a/drivers/firmware/efi/earlycon.c
+++ /dev/null
@@ -1,246 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2013 Intel Corporation; author Matt Fleming
- */
-
-#include <linux/console.h>
-#include <linux/efi.h>
-#include <linux/font.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/serial_core.h>
-#include <linux/screen_info.h>
-
-#include <asm/early_ioremap.h>
-
-static const struct console *earlycon_console __initdata;
-static const struct font_desc *font;
-static u32 efi_x, efi_y;
-static u64 fb_base;
-static bool fb_wb;
-static void *efi_fb;
-
-/*
- * EFI earlycon needs to use early_memremap() to map the framebuffer.
- * But early_memremap() is not usable for 'earlycon=efifb keep_bootcon',
- * memremap() should be used instead. memremap() will be available after
- * paging_init() which is earlier than initcall callbacks. Thus adding this
- * early initcall function early_efi_map_fb() to map the whole EFI framebuffer.
- */
-static int __init efi_earlycon_remap_fb(void)
-{
- /* bail if there is no bootconsole or it has been disabled already */
- if (!earlycon_console || !(earlycon_console->flags & CON_ENABLED))
- return 0;
-
- efi_fb = memremap(fb_base, screen_info.lfb_size,
- fb_wb ? MEMREMAP_WB : MEMREMAP_WC);
-
- return efi_fb ? 0 : -ENOMEM;
-}
-early_initcall(efi_earlycon_remap_fb);
-
-static int __init efi_earlycon_unmap_fb(void)
-{
- /* unmap the bootconsole fb unless keep_bootcon has left it enabled */
- if (efi_fb && !(earlycon_console->flags & CON_ENABLED))
- memunmap(efi_fb);
- return 0;
-}
-late_initcall(efi_earlycon_unmap_fb);
-
-static __ref void *efi_earlycon_map(unsigned long start, unsigned long len)
-{
- pgprot_t fb_prot;
-
- if (efi_fb)
- return efi_fb + start;
-
- fb_prot = fb_wb ? PAGE_KERNEL : pgprot_writecombine(PAGE_KERNEL);
- return early_memremap_prot(fb_base + start, len, pgprot_val(fb_prot));
-}
-
-static __ref void efi_earlycon_unmap(void *addr, unsigned long len)
-{
- if (efi_fb)
- return;
-
- early_memunmap(addr, len);
-}
-
-static void efi_earlycon_clear_scanline(unsigned int y)
-{
- unsigned long *dst;
- u16 len;
-
- len = screen_info.lfb_linelength;
- dst = efi_earlycon_map(y*len, len);
- if (!dst)
- return;
-
- memset(dst, 0, len);
- efi_earlycon_unmap(dst, len);
-}
-
-static void efi_earlycon_scroll_up(void)
-{
- unsigned long *dst, *src;
- u16 len;
- u32 i, height;
-
- len = screen_info.lfb_linelength;
- height = screen_info.lfb_height;
-
- for (i = 0; i < height - font->height; i++) {
- dst = efi_earlycon_map(i*len, len);
- if (!dst)
- return;
-
- src = efi_earlycon_map((i + font->height) * len, len);
- if (!src) {
- efi_earlycon_unmap(dst, len);
- return;
- }
-
- memmove(dst, src, len);
-
- efi_earlycon_unmap(src, len);
- efi_earlycon_unmap(dst, len);
- }
-}
-
-static void efi_earlycon_write_char(u32 *dst, unsigned char c, unsigned int h)
-{
- const u32 color_black = 0x00000000;
- const u32 color_white = 0x00ffffff;
- const u8 *src;
- int m, n, bytes;
- u8 x;
-
- bytes = BITS_TO_BYTES(font->width);
- src = font->data + c * font->height * bytes + h * bytes;
-
- for (m = 0; m < font->width; m++) {
- n = m % 8;
- x = *(src + m / 8);
- if ((x >> (7 - n)) & 1)
- *dst = color_white;
- else
- *dst = color_black;
- dst++;
- }
-}
-
-static void
-efi_earlycon_write(struct console *con, const char *str, unsigned int num)
-{
- struct screen_info *si;
- unsigned int len;
- const char *s;
- void *dst;
-
- si = &screen_info;
- len = si->lfb_linelength;
-
- while (num) {
- unsigned int linemax;
- unsigned int h, count = 0;
-
- for (s = str; *s && *s != '\n'; s++) {
- if (count == num)
- break;
- count++;
- }
-
- linemax = (si->lfb_width - efi_x) / font->width;
- if (count > linemax)
- count = linemax;
-
- for (h = 0; h < font->height; h++) {
- unsigned int n, x;
-
- dst = efi_earlycon_map((efi_y + h) * len, len);
- if (!dst)
- return;
-
- s = str;
- n = count;
- x = efi_x;
-
- while (n-- > 0) {
- efi_earlycon_write_char(dst + x*4, *s, h);
- x += font->width;
- s++;
- }
-
- efi_earlycon_unmap(dst, len);
- }
-
- num -= count;
- efi_x += count * font->width;
- str += count;
-
- if (num > 0 && *s == '\n') {
- efi_x = 0;
- efi_y += font->height;
- str++;
- num--;
- }
-
- if (efi_x + font->width > si->lfb_width) {
- efi_x = 0;
- efi_y += font->height;
- }
-
- if (efi_y + font->height > si->lfb_height) {
- u32 i;
-
- efi_y -= font->height;
- efi_earlycon_scroll_up();
-
- for (i = 0; i < font->height; i++)
- efi_earlycon_clear_scanline(efi_y + i);
- }
- }
-}
-
-static int __init efi_earlycon_setup(struct earlycon_device *device,
- const char *opt)
-{
- struct screen_info *si;
- u16 xres, yres;
- u32 i;
-
- if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
- return -ENODEV;
-
- fb_base = screen_info.lfb_base;
- if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
- fb_base |= (u64)screen_info.ext_lfb_base << 32;
-
- fb_wb = opt && !strcmp(opt, "ram");
-
- si = &screen_info;
- xres = si->lfb_width;
- yres = si->lfb_height;
-
- /*
- * efi_earlycon_write_char() implicitly assumes a framebuffer with
- * 32 bits per pixel.
- */
- if (si->lfb_depth != 32)
- return -ENODEV;
-
- font = get_default_font(xres, yres, -1, -1);
- if (!font)
- return -ENODEV;
-
- efi_y = rounddown(yres, font->height) - font->height;
- for (i = 0; i < (yres - efi_y) / font->height; i++)
- efi_earlycon_scroll_up();
-
- device->con->write = efi_earlycon_write;
- earlycon_console = device->con;
- return 0;
-}
-EARLYCON_DECLARE(efifb, efi_earlycon_setup);
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index f2a6b81e45c41334db71cca35f4fa5a827f728fe..2bb3f7a9e6e0f8ad2e9042d8c602b1cdec30755c 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -627,6 +627,17 @@ config FB_VESA
You will get a boot time penguin logo at no additional cost. Please
read <file:Documentation/fb/vesafb.rst>. If unsure, say Y.
+config FB_EARLYCON
+ bool "Generic framebuffer early console"
+ depends on FB && SERIAL_EARLYCON && !ARM
+ select FONT_SUPPORT
+ select ARCH_USE_MEMREMAP_PROT
+ help
+ Say Y here if you want early console support for firmware established
+ linear framebuffer. Unless you are using EFI framebuffer, you need to
+ specify framebuffer geometry and address in device-tree or in kernel
+ command line.
+
config FB_EFI
bool "EFI-based Framebuffer Support"
depends on (FB = y) && !IA64 && EFI
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 7795c4126706fd7bb832d94da5d14b0060849d1f..07406ab45a3f306a07d008a9f0a401347aeaa695 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -129,6 +129,7 @@ obj-$(CONFIG_FB_MX3) += mx3fb.o
obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o
obj-$(CONFIG_FB_SIMPLE) += simplefb.o
+obj-$(CONFIG_FB_EARLYCON) += earlycon.o
# the test framebuffer is last
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
diff --git a/drivers/video/fbdev/earlycon.c b/drivers/video/fbdev/earlycon.c
new file mode 100644
index 0000000000000000000000000000000000000000..5f6f4b228a50f23c1c77cf7ba5d50ff833efdd46
--- /dev/null
+++ b/drivers/video/fbdev/earlycon.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Intel Corporation; author Matt Fleming
+ * Copyright (C) 2022 Markuss Broks <markuss.broks at gmail.com>
+ */
+
+#include <asm/early_ioremap.h>
+#include <linux/console.h>
+#include <linux/efi.h>
+#include <linux/font.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/serial_core.h>
+#include <linux/screen_info.h>
+
+struct fb_earlycon {
+ u32 x, y, curr_x, curr_y, depth, stride;
+ size_t size;
+ phys_addr_t phys_base;
+ void __iomem *virt_base;
+};
+
+static const struct console *earlycon_console __initconst;
+static struct fb_earlycon info;
+static const struct font_desc *font;
+
+static int __init simplefb_earlycon_remap_fb(void)
+{
+ int is_ram;
+ /* bail if there is no bootconsole or it has been disabled already */
+ if (!earlycon_console || !(earlycon_console->flags & CON_ENABLED))
+ return 0;
+
+ is_ram = region_intersects(info.phys_base, info.size,
+ IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE);
+ is_ram = is_ram == REGION_INTERSECTS;
+
+ info.virt_base = memremap(info.phys_base, info.size,
+ is_ram ? MEMREMAP_WB : MEMREMAP_WC);
+
+ return info.virt_base ? 0 : -ENOMEM;
+}
+early_initcall(simplefb_earlycon_remap_fb);
+
+static int __init simplefb_earlycon_unmap_fb(void)
+{
+ /* unmap the bootconsole fb unless keep_bootcon has left it enabled */
+ if (info.virt_base && !(earlycon_console->flags & CON_ENABLED))
+ memunmap(info.virt_base);
+ return 0;
+}
+late_initcall(simplefb_earlycon_unmap_fb);
+
+static __ref void *simplefb_earlycon_map(unsigned long start, unsigned long len)
+{
+ pgprot_t fb_prot;
+
+ if (info.virt_base)
+ return info.virt_base + start;
+
+ fb_prot = PAGE_KERNEL;
+ return early_memremap_prot(info.phys_base + start, len, pgprot_val(fb_prot));
+}
+
+static __ref void simplefb_earlycon_unmap(void *addr, unsigned long len)
+{
+ if (info.virt_base)
+ return;
+
+ early_memunmap(addr, len);
+}
+
+static void simplefb_earlycon_clear_scanline(unsigned int y)
+{
+ unsigned long *dst;
+ u16 len;
+
+ len = info.stride;
+ dst = simplefb_earlycon_map(y * len, len);
+ if (!dst)
+ return;
+
+ memset(dst, 0, len);
+ simplefb_earlycon_unmap(dst, len);
+}
+
+static void simplefb_earlycon_scroll_up(void)
+{
+ unsigned long *dst, *src;
+ u16 len;
+ u32 i, height;
+
+ len = info.stride;
+ height = info.y;
+
+ for (i = 0; i < height - font->height; i++) {
+ dst = simplefb_earlycon_map(i * len, len);
+ if (!dst)
+ return;
+
+ src = simplefb_earlycon_map((i + font->height) * len, len);
+ if (!src) {
+ simplefb_earlycon_unmap(dst, len);
+ return;
+ }
+
+ memmove(dst, src, len);
+
+ simplefb_earlycon_unmap(src, len);
+ simplefb_earlycon_unmap(dst, len);
+ }
+}
+
+static void simplefb_earlycon_write_char(u8 *dst, unsigned char c, unsigned int h)
+{
+ const u8 *src;
+ int m, n, bytes;
+ u8 x;
+
+ bytes = BITS_TO_BYTES(font->width);
+ src = font->data + c * font->height * bytes + h * bytes;
+
+ for (m = 0; m < font->width; m++) {
+ n = m % 8;
+ x = *(src + m / 8);
+ if ((x >> (7 - n)) & 1)
+ memset(dst, 0xff, (info.depth / 8));
+ else
+ memset(dst, 0, (info.depth / 8));
+ dst += (info.depth / 8);
+ }
+}
+
+static void
+simplefb_earlycon_write(struct console *con, const char *str, unsigned int num)
+{
+ unsigned int len;
+ const char *s;
+ void *dst;
+
+ len = info.stride;
+
+ while (num) {
+ unsigned int linemax;
+ unsigned int h, count = 0;
+
+ for (s = str; *s && *s != '\n'; s++) {
+ if (count == num)
+ break;
+ count++;
+ }
+
+ linemax = (info.x - info.curr_x) / font->width;
+ if (count > linemax)
+ count = linemax;
+
+ for (h = 0; h < font->height; h++) {
+ unsigned int n, x;
+
+ dst = simplefb_earlycon_map((info.curr_y + h) * len, len);
+ if (!dst)
+ return;
+
+ s = str;
+ n = count;
+ x = info.curr_x;
+
+ while (n-- > 0) {
+ simplefb_earlycon_write_char(dst + (x * 4), *s, h);
+ x += font->width;
+ s++;
+ }
+
+ simplefb_earlycon_unmap(dst, len);
+ }
+
+ num -= count;
+ info.curr_x += count * font->width;
+ str += count;
+
+ if (num > 0 && *s == '\n') {
+ info.curr_x = 0;
+ info.curr_y += font->height;
+ str++;
+ num--;
+ }
+
+ if (info.curr_x + font->width > info.x) {
+ info.curr_x = 0;
+ info.curr_y += font->height;
+ }
+
+ if (info.curr_y + font->height > info.y) {
+ u32 i;
+
+ info.curr_y -= font->height;
+ simplefb_earlycon_scroll_up();
+
+ for (i = 0; i < font->height; i++)
+ simplefb_earlycon_clear_scanline(info.curr_y + i);
+ }
+ }
+}
+
+static int __init simplefb_earlycon_setup_common(struct earlycon_device *device,
+ const char *opt)
+{
+ int i;
+
+ info.stride = info.x * 4;
+ info.size = info.x * info.y * (info.depth / 8);
+
+ font = get_default_font(info.x, info.y, -1, -1);
+ if (!font)
+ return -ENODEV;
+
+ info.curr_y = rounddown(info.y, font->height) - font->height;
+ for (i = 0; i < (info.y - info.curr_y) / font->height; i++)
+ simplefb_earlycon_scroll_up();
+
+ device->con->write = simplefb_earlycon_write;
+ earlycon_console = device->con;
+ return 0;
+}
+
+static int __init simplefb_earlycon_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ struct uart_port *port = &device->port;
+ int ret;
+
+ if (!port->mapbase)
+ return -ENODEV;
+
+ info.phys_base = port->mapbase;
+
+ ret = sscanf(device->options, "%u,%u,%u", &info.x, &info.y, &info.depth);
+ if (ret != 3)
+ return -ENODEV;
+
+ return simplefb_earlycon_setup_common(device, opt);
+}
+
+EARLYCON_DECLARE(simplefb, simplefb_earlycon_setup);
+
+#ifdef CONFIG_EFI_EARLYCON
+static int __init simplefb_earlycon_setup_efi(struct earlycon_device *device,
+ const char *opt)
+{
+ if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
+ return -ENODEV;
+
+ info.phys_base = screen_info.lfb_base;
+ if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+ info.phys_base |= (u64)screen_info.ext_lfb_base << 32;
+
+ info.x = screen_info.lfb_width;
+ info.y = screen_info.lfb_height;
+ info.depth = screen_info.lfb_depth;
+
+ return simplefb_earlycon_setup_common(device, opt);
+}
+
+EARLYCON_DECLARE(efifb, simplefb_earlycon_setup_efi);
+#endif
+
+#ifdef CONFIG_OF_EARLY_FLATTREE
+static int __init simplefb_earlycon_setup_of(struct earlycon_device *device,
+ const char *opt)
+{
+ struct uart_port *port = &device->port;
+ const __be32 *val;
+
+ if (!port->mapbase)
+ return -ENODEV;
+
+ info.phys_base = port->mapbase;
+
+ val = of_get_flat_dt_prop(device->node, "width", NULL);
+ if (!val)
+ return -ENODEV;
+ info.x = be32_to_cpu(*val);
+
+ val = of_get_flat_dt_prop(device->node, "height", NULL);
+ if (!val)
+ return -ENODEV;
+ info.y = be32_to_cpu(*val);
+
+ val = of_get_flat_dt_prop(device->node, "stride", NULL);
+ if (!val)
+ return -ENODEV;
+ info.depth = (be32_to_cpu(*val) / info.x) * 8;
+
+ return simplefb_earlycon_setup_common(device, opt);
+}
+
+OF_EARLYCON_DECLARE(simplefb, "simple-framebuffer", simplefb_earlycon_setup_of);
+#endif
--
2.37.0
More information about the dri-devel
mailing list