[PATCH 1/1] drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_rgb332()
José Expósito
jose.exposito89 at gmail.com
Tue Jun 7 17:54:32 UTC 2022
Hi Thomas,
Thanks a lot for your review.
On Tue, Jun 07, 2022 at 09:22:38AM +0200, Thomas Zimmermann wrote:
> Hi,
>
> ading Kunit tests for the conversion helpers is pretty cool. Thanks for
> doing that.
>
> Am 06.06.22 um 11:55 schrieb José Expósito:
> > Test the conversion from XRGB8888 to RGB332.
> >
> > What is tested?
> >
> > - Different values for the X in XRGB8888 to make sure it is ignored
> > - Different clip values: Single pixel and full and partial buffer
> > - Well known colors: White, black, red, green, blue, magenta, yellow
> > and cyan
> > - Other colors: Randomly picked
> > - Destination pitch
> >
> > How to run the tests?
> >
> > $ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/gpu/drm \
> > --kconfig_add CONFIG_VIRTIO_UML=y \
> > --kconfig_add CONFIG_UML_PCI_OVER_VIRTIO=y
> >
> > Suggested-by: Javier Martinez Canillas <javierm at redhat.com>
> > Signed-off-by: José Expósito <jose.exposito89 at gmail.com>
> >
> > ---
> >
> > RFC -> v1: https://lore.kernel.org/dri-devel/20220530102017.471865-1-jose.exposito89@gmail.com/T/
> >
> > - Add .kunitconfig (Maxime Ripard)
> > - Fix memory leak (Daniel Latypov)
> > - Make config option generic (Javier Martinez Canillas):
> > DRM_FORMAR_HELPER_TEST -> DRM_KUNIT_TEST
> > - Remove DISABLE_STRUCTLEAK_PLUGIN (Daniel Latypov)
> > ---
> > drivers/gpu/drm/.kunitconfig | 3 +
> > drivers/gpu/drm/Kconfig | 16 +++
> > drivers/gpu/drm/Makefile | 2 +
> > drivers/gpu/drm/drm_format_helper_test.c | 166 +++++++++++++++++++++++
> > 4 files changed, 187 insertions(+)
> > create mode 100644 drivers/gpu/drm/.kunitconfig
> > create mode 100644 drivers/gpu/drm/drm_format_helper_test.c
> >
> > diff --git a/drivers/gpu/drm/.kunitconfig b/drivers/gpu/drm/.kunitconfig
> > new file mode 100644
> > index 000000000000..6ec04b4c979d
> > --- /dev/null
> > +++ b/drivers/gpu/drm/.kunitconfig
> > @@ -0,0 +1,3 @@
> > +CONFIG_KUNIT=y
> > +CONFIG_DRM=y
> > +CONFIG_DRM_KUNIT_TEST=y
> > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> > index e88c497fa010..3c0b1faba439 100644
> > --- a/drivers/gpu/drm/Kconfig
> > +++ b/drivers/gpu/drm/Kconfig
> > @@ -70,6 +70,22 @@ config DRM_DEBUG_SELFTEST
> > If in doubt, say "N".
> > +config DRM_KUNIT_TEST
> > + tristate "KUnit tests for DRM" if !KUNIT_ALL_TESTS
> > + depends on DRM && KUNIT=y
> > + select DRM_KMS_HELPER
> > + default KUNIT_ALL_TESTS
> > + help
> > + This builds unit tests for DRM. This option is not useful for
> > + distributions or general kernels, but only for kernel
> > + developers working on DRM and associated drivers.
> > +
> > + For more information on KUnit and unit tests in general,
> > + please refer to the KUnit documentation in
> > + Documentation/dev-tools/kunit/.
> > +
> > + If in doubt, say "N".
> > +
> > config DRM_KMS_HELPER
> > tristate
> > depends on DRM
> > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> > index 15fe3163f822..6549471f09c7 100644
> > --- a/drivers/gpu/drm/Makefile
> > +++ b/drivers/gpu/drm/Makefile
> > @@ -76,6 +76,8 @@ obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o
> > #
> > obj-$(CONFIG_DRM_DEBUG_SELFTEST) += selftests/
> > +obj-$(CONFIG_DRM_KUNIT_TEST) += drm_kms_helper.o \
>
> You already selected DRM_KMS_HELPER in Kconfig. Why do you need to list the
> module here?
Actually, it is not required. I'll remove it in v2.
> > + drm_format_helper_test.o
>
> One comment about source-code organization:
>
> There is potentially a long list of test files that will contain unit tests.
> I would prefer to put the unit tests into their own subdirectory (e.g.,
> kunit).
It makes sense, and it'd also be more consistent with selftest tests.
> > obj-$(CONFIG_DRM_MIPI_DBI) += drm_mipi_dbi.o
> > obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
> > diff --git a/drivers/gpu/drm/drm_format_helper_test.c b/drivers/gpu/drm/drm_format_helper_test.c
> > new file mode 100644
> > index 000000000000..e9302219f3f9
> > --- /dev/null
> > +++ b/drivers/gpu/drm/drm_format_helper_test.c
> > @@ -0,0 +1,166 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +
> > +#include <kunit/test.h>
> > +
> > +#include <drm/drm_device.h>
> > +#include <drm/drm_file.h>
> > +#include <drm/drm_format_helper.h>
> > +#include <drm/drm_fourcc.h>
> > +#include <drm/drm_framebuffer.h>
> > +#include <drm/drm_gem_framebuffer_helper.h>
> > +#include <drm/drm_mode.h>
> > +#include <drm/drm_print.h>
> > +#include <drm/drm_rect.h>
> > +
> > +#include "drm_crtc_internal.h"
> > +
> > +#define TEST_BUF_SIZE 50
> > +#define CLIP(x, y, w, h) { (x), (y), (x) + (w), (y) + (h) }
>
> I have long wished for an initializer macro for drm_rect.
> Please rename that CLIP macro to DRM_RECT_INIT and put it into
> <drm/drm_rect.h> with docs.
I'll include an extra patch for it on v2.
> > +
> > +struct xrgb8888_to_rgb332_case {
> > + const char *name;
> > + unsigned int pitch;
> > + unsigned int dst_pitch;
> > + struct drm_rect clip;
> > + const u32 xrgb8888[TEST_BUF_SIZE];
> > + const u8 expected[4 * TEST_BUF_SIZE];
> > +};
> > +
> > +static struct xrgb8888_to_rgb332_case xrgb8888_to_rgb332_cases[] = {
>
> The names of these tests are only mildly descriptive. Maybe add a
> single-line comment before each test case to describe what it does. Your
> commit description has a nice list of tests, which you can copy here almost
> as-is.
Ok, written down for v2.
> > + {
> > + .name = "Single pixel source",
> > + .pitch = 1 * 4,
> > + .dst_pitch = 0,
> > + .clip = CLIP(0, 0, 1, 1),
> > + .xrgb8888 = { 0x01FF0000 },
> > + .expected = { 0xE0 },
> > + },
> > + {
> > + .name = "Single pixel clip",
> > + .pitch = 2 * 4,
> > + .dst_pitch = 0,
> > + .clip = CLIP(1, 1, 1, 1),
> > + .xrgb8888 = {
> > + 0x00000000, 0x00000000,
> > + 0x00000000, 0x10FF0000,
> > + },
> > + .expected = { 0xE0 },
> > + },
> > + {
> > + .name = "White, black, red, green, blue, magenta, yellow, cyan",
> > + .pitch = 4 * 4,
> > + .dst_pitch = 0,
> > + .clip = CLIP(1, 1, 2, 4),
> > + .xrgb8888 = {
> > + 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> > + 0x00000000, 0x11FFFFFF, 0x22000000, 0x00000000,
> > + 0x00000000, 0x33FF0000, 0x4400FF00, 0x00000000,
> > + 0x00000000, 0x550000FF, 0x66FF00FF, 0x00000000,
> > + 0x00000000, 0x77FFFF00, 0x8800FFFF, 0x00000000,
> > + },
> > + .expected = {
> > + 0xFF, 0x00,
> > + 0xE0, 0x1C,
> > + 0x03, 0xE3,
> > + 0xFC, 0x1F,
> > + },
> > + },
> > + {
> > + .name = "Destination pitch",
> > + .pitch = 3 * 4,
> > + .dst_pitch = 5,
> > + .clip = CLIP(0, 0, 3, 3),
> > + .xrgb8888 = {
> > + 0xA10E449C, 0xB1114D05, 0xC1A80303,
> > + 0xD16C7073, 0xA20E449C, 0xB2114D05,
> > + 0xC2A80303, 0xD26C7073, 0xA30E449C,
> > + },
> > + .expected = {
> > + 0x0A, 0x08, 0xA0, 0x00, 0x00,
> > + 0x6D, 0x0A, 0x08, 0x00, 0x00,
> > + 0xA0, 0x6D, 0x0A, 0x00, 0x00,
> > + },
> > + },
> > +};
> > +
> > +/**
> > + * conversion_buf_size - Return the destination buffer size required to convert
> > + * between formats.
> > + * @src_format: source buffer pixel format (DRM_FORMAT_*)
> > + * @dst_format: destination buffer pixel format (DRM_FORMAT_*)
> > + * @dst_pitch: Number of bytes between two consecutive scanlines within dst
> > + * @clip: Clip rectangle area to convert
> > + *
> > + * Returns:
> > + * The size of the destination buffer or negative value on error.
> > + */
>
> You don't need to document internal functions with formatted comments. It
> will only confuse readers of the generated documentation. If you don't want
> to outright remove the comment, at least remove the /** at the top.
Cool, I'll remove the extra * on v2.
Speaking about documentation, I sent a patch explaining how to run
the tests:
https://lore.kernel.org/dri-devel/20220606180940.43371-1-jose.exposito89@gmail.com/T/
I'll send it as part of the v2 of this series.
Best wishes,
Jose
> Best regards
> Thomas
>
> > +static size_t conversion_buf_size(u32 src_format, u32 dst_format,
> > + unsigned int dst_pitch,
> > + const struct drm_rect *clip)
> > +{
> > + const struct drm_format_info *src_fi = drm_format_info(src_format);
> > + const struct drm_format_info *dst_fi = drm_format_info(dst_format);
> > + size_t width = drm_rect_width(clip);
> > + size_t src_nbytes;
> > +
> > + if (!src_fi || !dst_fi)
> > + return -EINVAL;
> > +
> > + if (dst_pitch)
> > + width = dst_pitch;
> > +
> > + src_nbytes = width * drm_rect_height(clip) * src_fi->cpp[0];
> > + if (!src_nbytes)
> > + return 0;
> > +
> > + return (src_nbytes * dst_fi->cpp[0]) / src_fi->cpp[0];
> > +}
> > +
> > +static void xrgb8888_to_rgb332_case_desc(struct xrgb8888_to_rgb332_case *t,
> > + char *desc)
> > +{
> > + strscpy(desc, t->name, KUNIT_PARAM_DESC_SIZE);
> > +}
> > +
> > +KUNIT_ARRAY_PARAM(xrgb8888_to_rgb332, xrgb8888_to_rgb332_cases,
> > + xrgb8888_to_rgb332_case_desc);
> > +
> > +static void xrgb8888_to_rgb332_test(struct kunit *test)
> > +{
> > + const struct xrgb8888_to_rgb332_case *params = test->param_value;
> > + size_t dst_size;
> > + __u8 *dst = NULL;
> > +
> > + struct drm_framebuffer fb = {
> > + .format = drm_format_info(DRM_FORMAT_XRGB8888),
> > + .pitches = { params->pitch, 0, 0 },
> > + };
> > +
> > + dst_size = conversion_buf_size(DRM_FORMAT_XRGB8888, DRM_FORMAT_RGB332,
> > + params->dst_pitch, ¶ms->clip);
> > + KUNIT_ASSERT_GT(test, dst_size, 0);
> > +
> > + dst = kunit_kzalloc(test, dst_size, GFP_KERNEL);
> > + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, dst);
> > +
> > + drm_fb_xrgb8888_to_rgb332(dst, params->dst_pitch, params->xrgb8888,
> > + &fb, ¶ms->clip);
> > + KUNIT_EXPECT_EQ(test, memcmp(dst, params->expected, dst_size), 0);
> > +}
> > +
> > +static struct kunit_case drm_format_helper_test_cases[] = {
> > + KUNIT_CASE_PARAM(xrgb8888_to_rgb332_test,
> > + xrgb8888_to_rgb332_gen_params),
> > + {}
> > +};
> > +
> > +static struct kunit_suite drm_format_helper_test_suite = {
> > + .name = "drm-format-helper-test",
> > + .test_cases = drm_format_helper_test_cases,
> > +};
> > +
> > +kunit_test_suite(drm_format_helper_test_suite);
> > +
> > +MODULE_DESCRIPTION("KUnit tests for the drm_format_helper APIs");
> > +MODULE_LICENSE("GPL");
> > +MODULE_AUTHOR("José Expósito <jose.exposito89 at gmail.com>");
>
> --
> Thomas Zimmermann
> Graphics Driver Developer
> SUSE Software Solutions Germany GmbH
> Maxfeldstr. 5, 90409 Nürnberg, Germany
> (HRB 36809, AG Nürnberg)
> Geschäftsführer: Ivo Totev
More information about the dri-devel
mailing list