[PATCH v2 1/3] drm/msm/dpu: move intf and wb assignment to dpu_encoder_setup_display()

Abhinav Kumar quic_abhinavk at quicinc.com
Wed Jun 15 21:22:00 UTC 2022


intf and wb resources are not dependent on the rm global
state so need not be allocated during dpu_encoder_virt_atomic_mode_set().

Move the allocation of intf and wb resources to dpu_encoder_setup_display()
so that we can utilize the hw caps even during atomic_check() phase.

Since dpu_encoder_setup_display() already has protection against
setting invalid intf_idx and wb_idx, these checks can now
be dropped as well.

changes in v2:
	- add phys->hw_intf and phys->hw_wb checks back

Fixes: e02a559a720f ("make changes to dpu_encoder to support virtual encoder")
Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 36 ++++++++++++++---------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 3a462e327e0e..3be73211d631 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -1048,24 +1048,6 @@ static void dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc,
 		phys->hw_pp = dpu_enc->hw_pp[i];
 		phys->hw_ctl = to_dpu_hw_ctl(hw_ctl[i]);
 
-		if (phys->intf_idx >= INTF_0 && phys->intf_idx < INTF_MAX)
-			phys->hw_intf = dpu_rm_get_intf(&dpu_kms->rm, phys->intf_idx);
-
-		if (phys->wb_idx >= WB_0 && phys->wb_idx < WB_MAX)
-			phys->hw_wb = dpu_rm_get_wb(&dpu_kms->rm, phys->wb_idx);
-
-		if (!phys->hw_intf && !phys->hw_wb) {
-			DPU_ERROR_ENC(dpu_enc,
-				      "no intf or wb block assigned at idx: %d\n", i);
-			return;
-		}
-
-		if (phys->hw_intf && phys->hw_wb) {
-			DPU_ERROR_ENC(dpu_enc,
-					"invalid phys both intf and wb block at idx: %d\n", i);
-			return;
-		}
-
 		phys->cached_mode = crtc_state->adjusted_mode;
 		if (phys->ops.atomic_mode_set)
 			phys->ops.atomic_mode_set(phys, crtc_state, conn_state);
@@ -2293,7 +2275,25 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 		struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i];
 		atomic_set(&phys->vsync_cnt, 0);
 		atomic_set(&phys->underrun_cnt, 0);
+
+		if (phys->intf_idx >= INTF_0 && phys->intf_idx < INTF_MAX)
+			phys->hw_intf = dpu_rm_get_intf(&dpu_kms->rm, phys->intf_idx);
+
+		if (phys->wb_idx >= WB_0 && phys->wb_idx < WB_MAX)
+			phys->hw_wb = dpu_rm_get_wb(&dpu_kms->rm, phys->wb_idx);
+
+		if (!phys->hw_intf && !phys->hw_wb) {
+			DPU_ERROR_ENC(dpu_enc, "no intf or wb block assigned at idx: %d\n", i);
+			ret = -EINVAL;
+		}
+
+		if (phys->hw_intf && phys->hw_wb) {
+			DPU_ERROR_ENC(dpu_enc,
+					"invalid phys both intf and wb block at idx: %d\n", i);
+			ret = -EINVAL;
+		}
 	}
+
 	mutex_unlock(&dpu_enc->enc_lock);
 
 	return ret;
-- 
2.7.4



More information about the dri-devel mailing list