[PATCH v3 6/6] ARM: dts: stm32: Use new media bus type macros

[Laurent Pinchart]

Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT sources.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 arch/arm/boot/dts/stm32429i-eval.dts  | 3 ++-
 arch/arm/boot/dts/stm32mp157c-ev1.dts | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 0d98aca01736..5fae11e6607b 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -50,6 +50,7 @@
 #include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
 
 / {
 	model = "STMicroelectronics STM32429i-EVAL board";
@@ -186,7 +187,7 @@ &dcmi {
 	port {
 		dcmi_0: endpoint {
 			remote-endpoint = <&ov2640_0>;
-			bus-type = <5>;
+			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 			bus-width = <8>;
 			hsync-active = <0>;
 			vsync-active = <0>;
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index d142dd30e16b..306d41a6138f 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -8,6 +8,7 @@
 #include "stm32mp157c-ed1.dts"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
 
 / {
 	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
@@ -90,7 +91,7 @@ &dcmi {
 	port {
 		dcmi_0: endpoint {
 			remote-endpoint = <&ov5640_0>;
-			bus-type = <5>;
+			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 			bus-width = <8>;
 			hsync-active = <0>;
 			vsync-active = <0>;
-- 
Regards,

Laurent Pinchart