[PATCH] drm/ast: Fix black screen when getting out of suspend

[Jocelyn Falempe]

With an AST2600, the screen is garbage when going out of suspend.
This is because color settings are lost, and not restored on resume.
Force the color settings on DPMS_ON, to make sure the settings are correct.

I didn't write this code, it comes from the out-of-tree aspeed driver v1.13
https://www.aspeedtech.com/support_driver/

Signed-off-by: Jocelyn Falempe <jfalempe at redhat.com>
Tested-by: Venkat Tadikonda <venkateswara.rao at intel.com>
---
 drivers/gpu/drm/ast/ast_mode.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 3eb9afecd9d4..cdddcb5c4439 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -990,6 +990,9 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
 	struct ast_private *ast = to_ast_private(crtc->dev);
 	u8 ch = AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF;
+	struct ast_crtc_state *ast_state;
+	const struct drm_format_info *format;
+	struct ast_vbios_mode_info *vbios_mode_info;
 
 	/* TODO: Maybe control display signal generation with
 	 *       Sync Enable (bit CR17.7).
@@ -1007,6 +1010,16 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
 			ast_dp_set_on_off(crtc->dev, 1);
 		}
 
+		ast_state = to_ast_crtc_state(crtc->state);
+		format = ast_state->format;
+
+		if (format){
+			vbios_mode_info = &ast_state->vbios_mode_info;
+
+			ast_set_color_reg(ast, format);
+			ast_set_vbios_color_reg(ast, format, vbios_mode_info);
+		}
+
 		ast_crtc_load_lut(ast, crtc);
 		break;
 	case DRM_MODE_DPMS_STANDBY:
-- 
2.36.1