[PATCH v3 05/14] dt-bindings: backlight: Add Mediatek MT6370 backlight

[Joe Simmons-Talbott]

On Thu, Jun 23, 2022 at 07:56:22PM +0800, ChiaEn Wu wrote:
> From: ChiYuan Huang <cy_huang at richtek.com>
> 
> Add mt6370 backlight binding documentation.
> 
> Signed-off-by: ChiYuan Huang <cy_huang at richtek.com>
> ---
> 
> v3
> - Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
>   "mediatek,bled-pwm-hys-input-th-steps"
> - Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
>   "bled-ocp-microamp" enum values
> ---
>  .../leds/backlight/mediatek,mt6370-backlight.yaml  | 92 ++++++++++++++++++++++
>  1 file changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> new file mode 100644
> index 0000000..26563ae
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT6370 Backlight
> +
> +maintainers:
> +  - ChiaEn Wu <chiaen_wu at richtek.com>
> +
> +description: |
> +  This module is part of the MT6370 MFD device.
> +  The MT6370 Backlight WLED driver supports up to a 29V output voltage for
> +  4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
> +  capability with 2048 current steps (11 bits) in exponential or linear
> +  mapping curves.
> +
> +allOf:
> +  - $ref: common.yaml#
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt6370-backlight
> +
> +  default-brightness:
> +    minimum: 0
> +    maximum: 2048
> +
> +  max-brightness:
> +    minimum: 0
> +    maximum: 2048
> +
> +  enable-gpios:
> +    description: External backlight 'enable' pin
> +    maxItems: 1
> +
> +  mediatek,bled-pwm-enable:
> +    description: |
> +      Enable external PWM input for backlight dimming
> +    type: boolean
> +
> +  mediatek,bled-pwm-hys-enable:
> +    description: |
> +      Enable the backlight input-hysteresis for PWM mode
> +    type: boolean
> +
> +  mediatek,bled-pwm-hys-input-th-steps:
> +    $ref: /schemas/types.yaml#/definitions/uint8
> +    enum: [1, 4, 16, 64]
> +    description: |
> +      The selection of the upper and lower bounds threshold of backlight
> +      PWM resolution. If we choose selection 64, the variation of PWM
> +      resolution needs over than 64 steps.

more than?

Thanks,
Joe

> +
> +  mediatek,bled-ovp-shutdown:
> +    description: |
> +      Enable the backlight shutdown when OVP level triggered
> +    type: boolean
> +
> +  mediatek,bled-ovp-microvolt:
> +    enum: [17000000, 21000000, 25000000, 29000000]
> +    description: |
> +      Backlight OVP level selection.
> +
> +  mediatek,bled-ocp-shutdown:
> +    description: |
> +      Enable the backlight shutdown when OCP level triggerred.
> +    type: boolean
> +
> +  mediatek,bled-ocp-microamp:
> +    enum: [900000, 1200000, 1500000, 1800000]
> +    description: |
> +      Backlight OC level selection.
> +
> +  mediatek,bled-channel-use:
> +    $ref: /schemas/types.yaml#/definitions/uint8
> +    description: |
> +      Backlight LED channel to be used.
> +      Each bit mapping to:
> +        - 0: CH4
> +        - 1: CH3
> +        - 2: CH2
> +        - 3: CH1
> +    minimum: 1
> +    maximum: 15
> +
> +required:
> +  - compatible
> +  - mediatek,bled-channel-use
> +
> +additionalProperties: false
> -- 
> 2.7.4
>