[PATCH v23 04/14] drm/mediatek: add display merge advance config API for MT8195

[CK Hu]

Hi, Nancy:

On Mon, 2022-06-20 at 17:19 +0800, Nancy.Lin wrote:
> Add merge new advance config API. The original merge API is
> mtk_ddp_comp_funcs function prototype. The API interface parameters
> cannot be modified, so add a new config API for extension. This is
> the preparation for ovl_adaptor merge control.

Applied to mediatek-drm-next [1], thanks.

[1] 
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
CK

> 
> Signed-off-by: Nancy.Lin <nancy.lin at mediatek.com>
> Reviewed-by: Chun-Kuang Hu <chunkuang.hu at kernel.org>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
> Tested-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
> Tested-by: Bo-Chen Chen <rex-bc.chen at mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_drv.h   |  3 ++
>  drivers/gpu/drm/mediatek/mtk_disp_merge.c | 52 ++++++++++++++++++++-
> --
>  2 files changed, 48 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> index 2cd1c660ace3..e847e90f436d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> @@ -63,6 +63,9 @@ void mtk_merge_config(struct device *dev, unsigned
> int width,
>  		      unsigned int bpc, struct cmdq_pkt *cmdq_pkt);
>  void mtk_merge_start(struct device *dev);
>  void mtk_merge_stop(struct device *dev);
> +void mtk_merge_advance_config(struct device *dev, unsigned int l_w,
> unsigned int r_w,
> +			      unsigned int h, unsigned int vrefresh,
> unsigned int bpc,
> +			      struct cmdq_pkt *cmdq_pkt);
>  
>  void mtk_ovl_bgclr_in_on(struct device *dev);
>  void mtk_ovl_bgclr_in_off(struct device *dev);
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_merge.c
> b/drivers/gpu/drm/mediatek/mtk_disp_merge.c
> index 45face638153..40da0555416d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_merge.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_merge.c
> @@ -17,6 +17,7 @@
>  #define DISP_REG_MERGE_CTRL		0x000
>  #define MERGE_EN				1
>  #define DISP_REG_MERGE_CFG_0		0x010
> +#define DISP_REG_MERGE_CFG_1		0x014
>  #define DISP_REG_MERGE_CFG_4		0x020
>  #define DISP_REG_MERGE_CFG_10		0x038
>  /* no swap */
> @@ -25,9 +26,12 @@
>  #define DISP_REG_MERGE_CFG_12		0x040
>  #define CFG_10_10_1PI_2PO_BUF_MODE		6
>  #define CFG_10_10_2PI_2PO_BUF_MODE		8
> +#define CFG_11_10_1PI_2PO_MERGE			18
>  #define FLD_CFG_MERGE_MODE			GENMASK(4, 0)
>  #define DISP_REG_MERGE_CFG_24		0x070
>  #define DISP_REG_MERGE_CFG_25		0x074
> +#define DISP_REG_MERGE_CFG_26		0x078
> +#define DISP_REG_MERGE_CFG_27		0x07c
>  #define DISP_REG_MERGE_CFG_36		0x0a0
>  #define ULTRA_EN				BIT(0)
>  #define PREULTRA_EN				BIT(4)
> @@ -98,12 +102,19 @@ static void mtk_merge_fifo_setting(struct
> mtk_disp_merge *priv,
>  void mtk_merge_config(struct device *dev, unsigned int w,
>  		      unsigned int h, unsigned int vrefresh,
>  		      unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
> +{
> +	mtk_merge_advance_config(dev, w, 0, h, vrefresh, bpc,
> cmdq_pkt);
> +}
> +
> +void mtk_merge_advance_config(struct device *dev, unsigned int l_w,
> unsigned int r_w,
> +			      unsigned int h, unsigned int vrefresh,
> unsigned int bpc,
> +			      struct cmdq_pkt *cmdq_pkt)
>  {
>  	struct mtk_disp_merge *priv = dev_get_drvdata(dev);
>  	unsigned int mode = CFG_10_10_1PI_2PO_BUF_MODE;
>  
> -	if (!h || !w) {
> -		dev_err(dev, "%s: input width(%d) or height(%d) is
> invalid\n", __func__, w, h);
> +	if (!h || !l_w) {
> +		dev_err(dev, "%s: input width(%d) or height(%d) is
> invalid\n", __func__, l_w, h);
>  		return;
>  	}
>  
> @@ -112,14 +123,41 @@ void mtk_merge_config(struct device *dev,
> unsigned int w,
>  		mode = CFG_10_10_2PI_2PO_BUF_MODE;
>  	}
>  
> -	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv-
> >regs,
> +	if (r_w)
> +		mode = CFG_11_10_1PI_2PO_MERGE;
> +
> +	mtk_ddp_write(cmdq_pkt, h << 16 | l_w, &priv->cmdq_reg, priv-
> >regs,
>  		      DISP_REG_MERGE_CFG_0);
> -	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv-
> >regs,
> +	mtk_ddp_write(cmdq_pkt, h << 16 | r_w, &priv->cmdq_reg, priv-
> >regs,
> +		      DISP_REG_MERGE_CFG_1);
> +	mtk_ddp_write(cmdq_pkt, h << 16 | (l_w + r_w), &priv->cmdq_reg, 
> priv->regs,
>  		      DISP_REG_MERGE_CFG_4);
> -	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv-
> >regs,
> +	/*
> +	 * DISP_REG_MERGE_CFG_24 is merge SRAM0 w/h
> +	 * DISP_REG_MERGE_CFG_25 is merge SRAM1 w/h.
> +	 * If r_w > 0, the merge is in merge mode (input0 and input1
> merge together),
> +	 * the input0 goes to SRAM0, and input1 goes to SRAM1.
> +	 * If r_w = 0, the merge is in buffer mode, the input goes
> through SRAM0 and
> +	 * then to SRAM1. Both SRAM0 and SRAM1 are set to the same
> size.
> +	 */
> +	mtk_ddp_write(cmdq_pkt, h << 16 | l_w, &priv->cmdq_reg, priv-
> >regs,
>  		      DISP_REG_MERGE_CFG_24);
> -	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv-
> >regs,
> -		      DISP_REG_MERGE_CFG_25);
> +	if (r_w)
> +		mtk_ddp_write(cmdq_pkt, h << 16 | r_w, &priv->cmdq_reg, 
> priv->regs,
> +			      DISP_REG_MERGE_CFG_25);
> +	else
> +		mtk_ddp_write(cmdq_pkt, h << 16 | l_w, &priv->cmdq_reg, 
> priv->regs,
> +			      DISP_REG_MERGE_CFG_25);
> +
> +	/*
> +	 * DISP_REG_MERGE_CFG_26 and DISP_REG_MERGE_CFG_27 is only used
> in LR merge.
> +	 * Only take effect when the merge is setting to merge mode.
> +	 */
> +	mtk_ddp_write(cmdq_pkt, h << 16 | l_w, &priv->cmdq_reg, priv-
> >regs,
> +		      DISP_REG_MERGE_CFG_26);
> +	mtk_ddp_write(cmdq_pkt, h << 16 | r_w, &priv->cmdq_reg, priv-
> >regs,
> +		      DISP_REG_MERGE_CFG_27);
> +
>  	mtk_ddp_write_mask(cmdq_pkt, SWAP_MODE, &priv->cmdq_reg, priv-
> >regs,
>  			   DISP_REG_MERGE_CFG_10, FLD_SWAP_MODE);
>  	mtk_ddp_write_mask(cmdq_pkt, mode, &priv->cmdq_reg, priv->regs,