[PATCH v3 31/71] drm/vc4: dpi: Protect device resources

Maxime Ripard maxime at cerno.tech
Wed Jun 29 12:34:30 UTC 2022


Our current code now mixes some resources whose lifetime are tied to the
device (clocks, IO mappings, etc.) and some that are tied to the DRM device
(encoder, bridge).

The device one will be freed at unbind time, but the DRM one will only be
freed when the last user of the DRM device closes its file handle.

So we end up with a time window during which we can call the encoder hooks,
but we don't have access to the underlying resources and device.

Let's protect all those sections with drm_dev_enter() and drm_dev_exit() so
that we bail out if we are during that window.

Reviewed-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_dpi.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_dpi.c b/drivers/gpu/drm/vc4/vc4_dpi.c
index b4059820c9f5..e892ac853f64 100644
--- a/drivers/gpu/drm/vc4/vc4_dpi.c
+++ b/drivers/gpu/drm/vc4/vc4_dpi.c
@@ -13,6 +13,7 @@
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
+#include <drm/drm_drv.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
@@ -111,9 +112,16 @@ static const struct debugfs_reg32 dpi_regs[] = {
 
 static void vc4_dpi_encoder_disable(struct drm_encoder *encoder)
 {
+	struct drm_device *dev = encoder->dev;
 	struct vc4_dpi *dpi = to_vc4_dpi(encoder);
+	int idx;
+
+	if (!drm_dev_enter(dev, &idx))
+		return;
 
 	clk_disable_unprepare(dpi->pixel_clock);
+
+	drm_dev_exit(idx);
 }
 
 static void vc4_dpi_encoder_enable(struct drm_encoder *encoder)
@@ -124,6 +132,7 @@ static void vc4_dpi_encoder_enable(struct drm_encoder *encoder)
 	struct drm_connector_list_iter conn_iter;
 	struct drm_connector *connector = NULL, *connector_scan;
 	u32 dpi_c = DPI_ENABLE;
+	int idx;
 	int ret;
 
 	/* Look up the connector attached to DPI so we can get the
@@ -203,6 +212,9 @@ static void vc4_dpi_encoder_enable(struct drm_encoder *encoder)
 			dpi_c |= DPI_VSYNC_DISABLE;
 	}
 
+	if (!drm_dev_enter(dev, &idx))
+		return;
+
 	DPI_WRITE(DPI_C, dpi_c);
 
 	ret = clk_set_rate(dpi->pixel_clock, mode->clock * 1000);
@@ -212,6 +224,8 @@ static void vc4_dpi_encoder_enable(struct drm_encoder *encoder)
 	ret = clk_prepare_enable(dpi->pixel_clock);
 	if (ret)
 		DRM_ERROR("Failed to set clock rate: %d\n", ret);
+
+	drm_dev_exit(idx);
 }
 
 static enum drm_mode_status vc4_dpi_encoder_mode_valid(struct drm_encoder *encoder,
-- 
2.36.1



More information about the dri-devel mailing list