[PATCH v2 8/8] drm: bridge: anx7625: Switch to devm_drm_of_get_bridge

[Jagan Teki]

On Wed, Mar 2, 2022 at 4:50 AM Linus Walleij <linus.walleij at linaro.org> wrote:
>
> On Tue, Mar 1, 2022 at 3:13 PM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> > +       bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, 0);
> > +       if (IS_ERR(bridge)) {
> > +               dev_err(dev, "error to get bridge\n");
> > +               return PTR_ERR(bridge);
> >         }
> >
> >         d->bridge_out = bridge;
>
> Also notice how this bridge gets used in other places:
>
> struct drm_connector *connector = drm_panel_bridge_connector(mcde->bridge);

mcde->bridge bridge is the current bridge pointer it cannot affect
this change. d->bridge_out is what we are finding of the downstream
bridge.

>
> Since you deleted:
>
> -       } else if (bridge) {
> -               /* TODO: AV8100 HDMI encoder goes here for example */
> -               dev_info(dev, "connected to non-panel bridge (unsupported)\n");
> -               return -ENODEV;

So, this means mcde dsi can support if the downstream bridge is the
panel not if the downstream bridge is the next bridge. With
devm_drm_of_get_bridge we cannot find that diff. Identifying the
panel-bridge with some name pointer during panel_bridge_add might
solve this, not sure that is proper way to do that?

Thanks,
Jagan.