[PATCH v16 1/4] drm/bridge: dw-hdmi: introduce dw_hdmi_enable_poll()

[Paul Cercueil]

Hi Neil,

Le jeu., mars 3 2022 at 17:23:02 +0100, Neil Armstrong 
<narmstrong at baylibre.com> a écrit :
> Hi,
> 
> On 26/02/2022 18:12, H. Nikolaus Schaller wrote:
>> so that specialization drivers like ingenic-dw-hdmi can enable 
>> polling.
>> 
>> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
>> ---
>>   drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 9 +++++++++
>>   include/drm/bridge/dw_hdmi.h              | 1 +
>>   2 files changed, 10 insertions(+)
>> 
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c 
>> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> index 4befc104d2200..43e375da131e8 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -3217,6 +3217,15 @@ static int dw_hdmi_parse_dt(struct dw_hdmi 
>> *hdmi)
>>   	return 0;
>>   }
>>   +void dw_hdmi_enable_poll(struct dw_hdmi *hdmi, bool enable)
>> +{
>> +	if (hdmi->bridge.dev)
>> +		hdmi->bridge.dev->mode_config.poll_enabled = enable;
>> +	else
>> +		dev_warn(hdmi->dev, "no hdmi->bridge.dev");
>> +}
>> +EXPORT_SYMBOL_GPL(dw_hdmi_enable_poll);
>> +
>>   struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
>>   			      const struct dw_hdmi_plat_data *plat_data)
>>   {
>> diff --git a/include/drm/bridge/dw_hdmi.h 
>> b/include/drm/bridge/dw_hdmi.h
>> index 2a1f85f9a8a3f..963960794b40e 100644
>> --- a/include/drm/bridge/dw_hdmi.h
>> +++ b/include/drm/bridge/dw_hdmi.h
>> @@ -196,5 +196,6 @@ enum drm_connector_status 
>> dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
>>   void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
>>   			    bool force, bool disabled, bool rxsense);
>>   void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
>> +void dw_hdmi_enable_poll(struct dw_hdmi *hdmi, bool enable);
>>     #endif /* __IMX_HDMI_H__ */
> 
> As I understand, this is because the IRQ line of the dw-hdmi IP isn't 
> connected right ? and you use the display-connector ddc gpio instead ?

According to the CI20 schematic, it is wired properly. So that's 
strange.

> 
> In this case I think the Ingenic DRM core should call 
> drm_kms_helper_poll_init(drm) instead.

Yes, the ingenic-drm driver does not poll for connectors because until 
now it never has been needed.

Cheers,
-Paul