[PATCH 3/4] drm/msm: Add SYSPROF param

[Rob Clark]

On Thu, Mar 3, 2022 at 1:17 PM Rob Clark <robdclark at gmail.com> wrote:
>
> On Thu, Mar 3, 2022 at 12:47 PM Stephen Boyd <swboyd at chromium.org> wrote:
> >
> > Quoting Rob Clark (2022-03-03 11:46:47)
> > > diff --git a/drivers/gpu/drm/msm/msm_gpu.h b/drivers/gpu/drm/msm/msm_gpu.h
> > > index fde9a29f884e..0ba1dbd4e50f 100644
> > > --- a/drivers/gpu/drm/msm/msm_gpu.h
> > > +++ b/drivers/gpu/drm/msm/msm_gpu.h
> > > @@ -330,6 +337,24 @@ struct msm_file_private {
> > >         struct kref ref;
> > >         int seqno;
> > >
> > > +       /**
> > > +        * sysprof:
> > > +        *
> > > +        * The value of MSM_PARAM_SYSPROF set by userspace.  This is
> > > +        * intended to be used by system profiling tools like Mesa's
> > > +        * pps-producer (perfetto), and restricted to CAP_SYS_ADMIN.
> > > +        *
> > > +        * Setting a value of 1 will preserve performance counters across
> > > +        * context switches.  Setting a value of 2 will in addition
> > > +        * suppress suspend.  (Performance counters loose  state across
> >
> > s/loose  /lose/
>
> fixed locally
>
> > > +        * power collapse, which is undesirable for profiling in some
> > > +        * cases.)
> > > +        *
> > > +        * The value automatically reverts to zero when the drm device
> > > +        * file is closed.
> > > +        */
> > > +       int sysprof;
> > > +
> > >         /**
> > >          * elapsed:
> > >          *
> > > diff --git a/drivers/gpu/drm/msm/msm_submitqueue.c b/drivers/gpu/drm/msm/msm_submitqueue.c
> > > index 7cb158bcbcf6..4179db54ac93 100644
> > > --- a/drivers/gpu/drm/msm/msm_submitqueue.c
> > > +++ b/drivers/gpu/drm/msm/msm_submitqueue.c
> > > @@ -7,6 +7,40 @@
> > >
> > >  #include "msm_gpu.h"
> > >
> > > +int msm_file_private_set_sysprof(struct msm_file_private *ctx,
> > > +                                struct msm_gpu *gpu, int sysprof)
> > > +{
> > > +       /* unwind old value first: */
> > > +       switch (ctx->sysprof) {
> > > +       case 2:
> > > +               pm_runtime_put_autosuspend(&gpu->pdev->dev);
> > > +               fallthrough;
> > > +       case 1:
> > > +               refcount_dec(&gpu->sysprof_active);
> > > +               fallthrough;
> > > +       case 0:
> > > +               break;
> > > +       }
> > > +
> > > +       /* then apply new value: */
> >
> > It would be safer to swap this. Otherwise a set when the values are at
> > "1" would drop to "zero" here and potentially trigger some glitch,
> > whereas incrementing one more time and then dropping the previous state
> > would avoid that short blip.
> >
> > > +       switch (sysprof) {
> > > +       default:
> > > +               return -EINVAL;
> >
> > This will become more complicated though.
>
> Right, that is why I took the "unwind first and then re-apply"
> approach.. in practice I expect userspace to set the value before it
> starts sampling counter values, so I wasn't too concerned about this
> racing with a submit and clearing the counters.  (Plus any glitch if
> userspace did decide to change it dynamically would just be transient
> and not really a big deal.)

Actually I could just swap the two switch's.. the result would be that
an EINVAL would not change the state instead of dropping the state to
zero.  Maybe that is better anyways

BR,
-R


> BR,
> -R
>
> > > +       case 2:
> > > +               pm_runtime_get_sync(&gpu->pdev->dev);
> > > +               fallthrough;
> > > +       case 1:
> > > +               refcount_inc(&gpu->sysprof_active);
> > > +               fallthrough;
> > > +       case 0:
> > > +               break;
> > > +       }
> > > +
> > > +       ctx->sysprof = sysprof;
> > > +
> > > +       return 0;
> > > +}