[PATCH v3 4/6] drm/i915/gem: Add extra pages in ttm_tt for ccs data

Matthew Auld matthew.auld at intel.com
Mon Mar 7 15:32:24 UTC 2022


On 07/03/2022 13:40, Ramalingam C wrote:
> On Xe-HP and later devices, dedicated compression control state (CCS)
> stored in local memory is used for each surface, to support the
> 3D and media compression formats.
> 
> The memory required for the CCS of the entire local memory is 1/256 of
> the local memory size. So before the kernel boot, the required memory
> is reserved for the CCS data and a secure register will be programmed
> with the CCS base address
> 
> So when an object is allocated in local memory, dont need to explicitly
> allocate the space for ccs data. But when the obj is evicted into the
> smem, to hold the compression related data along with the obj extra space
> is needed in smem. i.e obj_size + (obj_size/256).
> 
> Hence when a smem pages are allocated for an obj with lmem placement
> possibility we create with the extra pages required for the ccs data for
> the obj size.
> 
> v2:
>    Used imperative wording [Thomas]
> 
> Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
> cc: Christian Koenig <christian.koenig at amd.com>
> cc: Hellstrom Thomas <thomas.hellstrom at intel.com>
> Reviewed-by: Thomas Hellström <thomas.hellstrom at linux.intel.com>
> ---
>   drivers/gpu/drm/i915/gem/i915_gem_ttm.c | 23 ++++++++++++++++++++++-
>   1 file changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/gem/i915_gem_ttm.c b/drivers/gpu/drm/i915/gem/i915_gem_ttm.c
> index 1a8262f5f692..c7a36861c38d 100644
> --- a/drivers/gpu/drm/i915/gem/i915_gem_ttm.c
> +++ b/drivers/gpu/drm/i915/gem/i915_gem_ttm.c
> @@ -20,6 +20,7 @@
>   #include "gem/i915_gem_ttm.h"
>   #include "gem/i915_gem_ttm_move.h"
>   #include "gem/i915_gem_ttm_pm.h"
> +#include "gt/intel_gpu_commands.h"
>   
>   #define I915_TTM_PRIO_PURGE     0
>   #define I915_TTM_PRIO_NO_PAGES  1
> @@ -255,12 +256,27 @@ static const struct i915_refct_sgt_ops tt_rsgt_ops = {
>   	.release = i915_ttm_tt_release
>   };
>   
> +static inline bool
> +i915_gem_object_has_lmem_placement(struct drm_i915_gem_object *obj)
> +{
> +	int i;
> +
> +	for (i = 0; i < obj->mm.n_placements; i++)
> +		if (obj->mm.placements[i]->type == INTEL_MEMORY_LOCAL)
> +			return true;
> +
> +	return false;
> +}
> +
>   static struct ttm_tt *i915_ttm_tt_create(struct ttm_buffer_object *bo,
>   					 uint32_t page_flags)
>   {
> +	struct drm_i915_private *i915 = container_of(bo->bdev, typeof(*i915),
> +						     bdev);
>   	struct ttm_resource_manager *man =
>   		ttm_manager_type(bo->bdev, bo->resource->mem_type);
>   	struct drm_i915_gem_object *obj = i915_ttm_to_gem(bo);
> +	unsigned long ccs_pages = 0;
>   	enum ttm_caching caching;
>   	struct i915_ttm_tt *i915_tt;
>   	int ret;
> @@ -283,7 +299,12 @@ static struct ttm_tt *i915_ttm_tt_create(struct ttm_buffer_object *bo,
>   		i915_tt->is_shmem = true;
>   	}
>   
> -	ret = ttm_tt_init(&i915_tt->ttm, bo, page_flags, caching, 0);
> +	if (HAS_FLAT_CCS(i915) && i915_gem_object_has_lmem_placement(obj))
> +		ccs_pages = DIV_ROUND_UP(DIV_ROUND_UP(bo->base.size,
> +						      NUM_BYTES_PER_CCS_BYTE),
> +					 PAGE_SIZE);

Did you figure out how to handle the case where we have LMEM + SMEM, and 
are unable to place the object into LMEM, and then it just ends up being 
kept in SMEM? AFAIK the vm.insert_entries code has always just assumed 
that the vma sg_table size is the same as the vma->size, and so will 
happily create PTEs for the hidden ccs page(s), which might corrupt the 
users vm, depending on the exact layout.

Also it looks like the _shmem_writeback() call should now use 
ttm_tt->num_pages, instead of the object size?

> +
> +	ret = ttm_tt_init(&i915_tt->ttm, bo, page_flags, caching, ccs_pages);
>   	if (ret)
>   		goto err_free;
>   


More information about the dri-devel mailing list