[PATCH v1 1/2] Revert "dt-bindings:drm/bridge:anx7625:add vendor define"

[Rob Herring]

On Mon, Mar 07, 2022 at 04:45:57PM +0100, Robert Foss wrote:
> This reverts commit a43661e7e819b100e1f833a35018560a1d9abb39.

S-o-b and reason for the revert?

> ---
>  .../display/bridge/analogix,anx7625.yaml      | 65 +------------------
>  1 file changed, 2 insertions(+), 63 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> index 1d3e88daca041..ab48ab2f4240d 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -43,70 +43,14 @@ properties:
>    vdd33-supply:
>      description: Regulator that provides the supply 3.3V power.
>  
> -  analogix,lane0-swing:
> -    $ref: /schemas/types.yaml#/definitions/uint8-array
> -    minItems: 1
> -    maxItems: 20
> -    description:
> -      an array of swing register setting for DP tx lane0 PHY.
> -      Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
> -      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
> -      Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
> -      [Swing control] setting.
> -      Registers 0~9, bit 3:0 is [Boost control], these bits control
> -      post cursor manual, increase the [Boost control] to increase
> -      Pre-emphasis value.
> -      Registers 0~9, bit 6:4 is [Swing control], these bits control
> -      swing manual, increase [Swing control] setting to add Vp-p value
> -      for each Swing, Pre.
> -      Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
> -      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
> -      Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
> -      [R Termination control] setting.
> -      Registers 10~19, bit 4:0 is [R select control], these bits are
> -      compensation manual, increase it can enhance IO driven strength
> -      and Vp-p.
> -      Registers 10~19, bit 5:6 is [R termination control], these bits
> -      adjust 50ohm impedance of DP tx termination. 00:55 ohm,
> -      01:50 ohm(default), 10:45 ohm, 11:40 ohm.
> -
> -  analogix,lane1-swing:
> -    $ref: /schemas/types.yaml#/definitions/uint8-array
> -    minItems: 1
> -    maxItems: 20
> -    description:
> -      an array of swing register setting for DP tx lane1 PHY.
> -      DP TX lane1 swing register setting same with lane0
> -      swing, please refer lane0-swing property description.

These apply to the DP side, so no need to revert this part.

> -
> -  analogix,audio-enable:
> -    type: boolean
> -    description: let the driver enable audio HDMI codec function or not.
> -

Not sure on this one...

>    ports:
>      $ref: /schemas/graph.yaml#/properties/ports
>  
>      properties:
>        port at 0:
> -        $ref: /schemas/graph.yaml#/$defs/port-base
> -        unevaluatedProperties: false
> +        $ref: /schemas/graph.yaml#/properties/port
>          description:
> -          MIPI DSI/DPI input.
> -
> -        properties:
> -          endpoint:
> -            $ref: /schemas/media/video-interfaces.yaml#
> -            type: object
> -            additionalProperties: false
> -
> -            properties:
> -              remote-endpoint: true
> -
> -              bus-type:
> -                enum: [1, 5]

I think the error here is really 1 should be 4 which corresponds to 
D-PHY which is used by both CSI and DSI. Otherwise, I don't really see 
the issue with bus-type being shared between CSI and DSI.

> -                default: 1
> -
> -              data-lanes: true
> +          Video port for MIPI DSI input.
>  
>        port at 1:
>          $ref: /schemas/graph.yaml#/properties/port
> @@ -143,9 +87,6 @@ examples:
>              vdd10-supply = <&pp1000_mipibrdg>;
>              vdd18-supply = <&pp1800_mipibrdg>;
>              vdd33-supply = <&pp3300_mipibrdg>;
> -            analogix,audio-enable;
> -            analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
> -            analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
>  
>              ports {
>                  #address-cells = <1>;
> @@ -155,8 +96,6 @@ examples:
>                      reg = <0>;
>                      anx7625_in: endpoint {
>                          remote-endpoint = <&mipi_dsi>;
> -                        bus-type = <5>;
> -                        data-lanes = <0 1 2 3>;
>                      };
>                  };
>  
> -- 
> 2.32.0
> 
>