[PATCH v2 0/4] drm/bridge: ti-sn65dsi86: Support non-eDP DisplayPort connectors

[Kieran Bingham]

Implement support for non eDP connectors on the TI-SN65DSI86 bridge, and
provide IRQ based hotplug detect to identify when the connector is
present.

no-hpd is extended to be the default behaviour for non DisplayPort
connectors.

This series is based on top of José Expósito's patch [0] "drm/bridge:
ti-sn65dsi86: switch to devm_drm_of_get_bridge" and Nikita Yushchenko's
patch [1] "drm/bridge_connector: enable HPD by default if supported".

[0] https://lore.kernel.org/all/20220228183955.25508-1-jose.exposito89@gmail.com/
[1] https://lore.kernel.org/all/20211225063151.2110878-1-nikita.yoush@cogentembedded.com/

Kieran Bingham (1):
  drm/bridge: ti-sn65dsi86: Support hotplug detection

Laurent Pinchart (3):
  drm/bridge: ti-sn65dsi86: Implement bridge connector operations
  drm/bridge: ti-sn65dsi86: Make connector creation optional
  drm/bridge: ti-sn65dsi86: Support DisplayPort (non-eDP) mode

 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 178 ++++++++++++++++++++++----
 1 file changed, 156 insertions(+), 22 deletions(-)

-- 
2.32.0