[PATCH v3 0/3] drm/bridge: ti-sn65dsi86: Support non-eDP DisplayPort connectors

[Doug Anderson]

Hi,

On Thu, Mar 10, 2022 at 7:22 AM Kieran Bingham
<kieran.bingham+renesas at ideasonboard.com> wrote:
>
> Implement support for non eDP connectors on the TI-SN65DSI86 bridge, and
> provide IRQ based hotplug detect to identify when the connector is
> present.
>
> no-hpd is extended to be the default behaviour for non DisplayPort
> connectors.
>
> This series is based upon Sam Ravnborgs and Rob Clarks series [0] to
> support DRM_BRIDGE_STATE_OPS and NO_CONNECTOR support on the SN65DSI86,
> however some extra modifications have been made on the top of Sam's
> series to fix compile breakage and the NO_CONNECTOR support.

This confused me a little bit. As far as I know Rob's series is
abandoned and he's not working on it. I assume that Sam will
eventually re-post his series, but it had unsolved problems and the
bpp solution he had totally didn't work because nobody was setting
"output_bus_cfg.format" [1]. Did you solve that? ...or you're just
going to let your patches sit there and hope that Sam will solve the
problem and re-post his series?

I'll admit I didn't go through your git tree to figure out if you
solved it some way. If you did, I would have assumed you'd have
re-posted his patches in your series w/ the solution...

[1] https://lore.kernel.org/r/CAD=FV=WW6HWLOD9AzTpjwva9UHY=AR+LABEWqJQznz6Nbb4sOw@mail.gmail.com/

-Doug