[PATCH v3 1/4] drm/ingenic : add ingenic_drm_bridge_atomic_enable

Christophe Branchereau cbranchereau at gmail.com
Fri Mar 11 12:04:50 UTC 2022


This allows the CRTC to be enabled after panels have slept out,
and before their display is turned on, solving a graphical bug
on the newvision nv3502c

Signed-off-by: Christophe Branchereau <cbranchereau at gmail.com>
---
 drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index dcf44cb00821..51512f41263e 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -226,6 +226,18 @@ static int ingenic_drm_update_pixclk(struct notifier_block *nb,
 	}
 }
 
+static void ingenic_drm_bridge_atomic_enable(struct drm_bridge *bridge,
+					     struct drm_bridge_state *old_bridge_state)
+{
+	struct ingenic_drm *priv = drm_device_get_priv(bridge->dev);
+
+	regmap_write(priv->map, JZ_REG_LCD_STATE, 0);
+
+	regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
+			   JZ_LCD_CTRL_ENABLE | JZ_LCD_CTRL_DISABLE,
+			   JZ_LCD_CTRL_ENABLE);
+}
+
 static void ingenic_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 					   struct drm_atomic_state *state)
 {
@@ -237,17 +249,11 @@ static void ingenic_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 	if (WARN_ON(IS_ERR(priv_state)))
 		return;
 
-	regmap_write(priv->map, JZ_REG_LCD_STATE, 0);
-
 	/* Set addresses of our DMA descriptor chains */
 	next_id = priv_state->use_palette ? HWDESC_PALETTE : 0;
 	regmap_write(priv->map, JZ_REG_LCD_DA0, dma_hwdesc_addr(priv, next_id));
 	regmap_write(priv->map, JZ_REG_LCD_DA1, dma_hwdesc_addr(priv, 1));
 
-	regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
-			   JZ_LCD_CTRL_ENABLE | JZ_LCD_CTRL_DISABLE,
-			   JZ_LCD_CTRL_ENABLE);
-
 	drm_crtc_vblank_on(crtc);
 }
 
@@ -968,6 +974,7 @@ static const struct drm_encoder_helper_funcs ingenic_drm_encoder_helper_funcs =
 
 static const struct drm_bridge_funcs ingenic_drm_bridge_funcs = {
 	.attach			= ingenic_drm_bridge_attach,
+	.atomic_enable		= ingenic_drm_bridge_atomic_enable,
 	.atomic_check		= ingenic_drm_bridge_atomic_check,
 	.atomic_reset		= drm_atomic_helper_bridge_reset,
 	.atomic_duplicate_state	= drm_atomic_helper_bridge_duplicate_state,
-- 
2.35.1



More information about the dri-devel mailing list