[PATCH v8 00/13] Add GuC Error Capture Support
Alan Previn
alan.previn.teres.alexis at intel.com
Sat Mar 12 00:13:30 UTC 2022
This series:
1. Enables support of GuC to report error-state-capture
using a list of MMIO registers the driver registers
and GuC will dump, log and notify right before a GuC
triggered engine-reset event.
2. Updates the ADS blob creation to register said lists
of global, engine class and engine instance registers
with GuC.
3. Defines tables of register lists that are global or
engine class or engine instance in scope.
4. Updates usage and buffer-state data for the regions
of the shared GuC log-buffer to accomdate both
the existing relay logging of general debug logs
along with the new error state capture usage.
5. Using a pool of preallocated memory, provide ability
to extract and format the GuC reported register-capture
data into chunks consistent with existing i915 error-
state collection flows and structures.
6. Connects the i915_gpu_coredump reporting function
to the GuC error capture module to print all GuC
error state capture dumps that is reported.
This is the 8th rev of this series with the first 3 revs
labelled as RFC.
Prior receipts of rvb's:
- Patch #2, #3, #4, #5, #10, #11, #12, #13 have received
R-v-b's from Umesh Nerlige Ramappa <umesh.nerlige.ramappa at intel.com>
- Patch #6, #7, #8, #9 has received an R-v-b from Matthew Brost
<matthew.brost at intel.com>. NOTE: some of these came in on the
trybot series. https://patchwork.freedesktop.org/series/100831/
Changes from prior revs:
v8: - Fix a bug found by CI in rev7: Create a cached ADS
capture list for null-header like the other lists.
- Fixed a bug on the ggtt offset calculation in the
ADS population loop. Thanks to Matt Brost.
- Change the storage uses for initial allocation and
caching of the ADS register lists so we only store
a regular pointer instead of file handle.
- Multiple improvements on code styling, variable names,
comments and code reduction from Umesh suggestions
across multiple patches.
v7: - Rebased on lastest drm_tip that has the ADS now using
shmem based ads_blob_write utilities. Stress test
was performed with this patch included to fix a
legacy bug:
https://patchwork.freedesktop.org/series/100768/
v6: - In patch #1, ADS reg-list population, we now alloc
regular memory to create the lists and cache them for
simpler and faster use by GuC ADS module at init,
suspend-resume and reset cycles. This was in response
to review comments from Lucas De Marchi that also
wanted to ensure the GuC ADS module owns the final
copying into the ADS phyical memory.
- Thanks to Jani Nikula for pointing out that patch #2
and #3 should ensure static tables as constant and
dynamic lists should be allocated and cached but
attached to the GT level for the case of multiple
cards with different fusings for steered registers.
These are addressed now along with multiple code
style fixups (thanks to review comment from Umesh)
and splitting the steered register list generation
as a seperate patch.
- The extraction functionality, Patch #10 and #11 (was
patch #7), has fixed all of Umesh's review comments
related to the code styling. Additionally, it was
discovered during stress tests that the extraction
function could be called by the ct processing thread
at the same time as the start of a GT reset event.
Thus, a redesign was done whereby the linked list of
processed capture-output-nodes are allocated up
front and reused throughout the driver's life to
ensure no memory locks are taken during extraction.
- For patch #6 (now 7, 8 and 9), updates to
intel_guc_log was split into smaller chunks and the
log_state structure was returned back to inside of
the intel_guc_log struct as opposed to the
intel_guc struct in prior rev. This is in response
to review comments by Matt Brost.
- #Patch 13 (previously #10) is mostly identical but
addresses all of the code styling comments reviews
from Umesh.
v5: - Added Gen9->Gen11 register list for CI coverage that
included Gen9 with GuC submission.
- Redesigned the extraction of the GuC error-capture
dumps by grouping them into complete per-engine-reset
nodes. Complete here means each node includes the
global, engine-class and engine-instance register
lists in a single structure.
- Extraction is decoupled from the print-out. We now
do the extraction immediately when receiving the
G2H for error-capture notification. A link list of
nodes is maintained with a FIFO based threshold
while awaiting retrieval from i915_gpu_coredump's
capture_engine function.
- Added new plumbing through the i915_gpu_coredump
allocation and capture functions to include a flag
that is used indicate that GuC had triggered the
reset. This new plumbing guarantees an exact match
from i915_gpu_coredump's per-engine vma recording
and node-retrieval from the guc-error-capture.
- Broke the coredump gt_global capture and recording
functions into smaller subsets so we can reuse as
much of the existing legacy register reading + printing
functions and only rely on GuC error-capture for
the smaller subset of registers that are tied to
engine workload execution.
- Updated the register list to follow the legacy execlist
format of printout.
v4:
- Rebased on latest drm-tip that has been merged with the
support of GuC firmware version 69.0.3 that is required
for GuC error-state-catpure to work.
- Added register list for DG2 which is the same as XE_LP
except an additional steering register set.
- Fixed a bug in the end of capture parsing loop in
intel_guc_capture_out_print_next_group that was not
properly comparing the engine-instance and engine-
class being parsed against the one that triggered
the i915_gpu_coredump.
v3:
- Fixed all review comments from rev2 except the following:
- Michal Wajdeczko proposed adding a seperate function
to lookup register string nameslookup (based on offset)
but decided against it because of offset conflicts
and the current table layout is easier to maintain.
- Last set of checkpatch errors pertaining to "COMPLEX
MACROS" should be fixed on next rev.
- Abstracted internal-to-guc-capture information into a new
__guc_state_capture_priv structure that allows the exclusion
of intel_guc.h and intel_guc_fwif.h from intel_guc_capture.h.
Now, only the first 2 patches have a wider build time
impact because of the changes to intel_guc_fwif.h but
subsequent changes to guc-capture internal structures
or firmware interfaces used solely by guc-capture module
shoudn't impact the rest of the driver build.
- Added missing Gen12LP registers and added slice+subslice
indices when reporting extended steered registers.
- Add additional checks to ensure that the GuC reported
error capture information matches the i915_gpu_coredump
that is being printed before we print out the corresponding
VMA dumps such as the batch buffer.
v2:
- Ignore - failed CI retest.
Alan Previn (13):
drm/i915/guc: Update GuC ADS size for error capture lists
drm/i915/guc: Add XE_LP static registers for GuC error capture.
drm/i915/guc: Add XE_LP steered register lists support
drm/i915/guc: Add DG2 registers for GuC error state capture.
drm/i915/guc: Add Gen9 registers for GuC error state capture.
drm/i915/guc: Add GuC's error state capture output structures.
drm/i915/guc: Update GuC-log relay function names
drm/i915/guc: Add capture region into intel_guc_log
drm/i915/guc: Check sizing of guc_capture output
drm/i915/guc: Extract GuC error capture lists on G2H notification.
drm/i915/guc: Pre-allocate output nodes for extraction
drm/i915/guc: Plumb GuC-capture into gpu_coredump
drm/i915/guc: Print the GuC error capture output register list.
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/gt/intel_engine_cs.c | 4 +-
.../drm/i915/gt/intel_execlists_submission.c | 4 +-
drivers/gpu/drm/i915/gt/intel_reset.c | 2 +-
.../gpu/drm/i915/gt/uc/abi/guc_actions_abi.h | 7 +
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h | 218 +++
drivers/gpu/drm/i915/gt/uc/intel_guc.c | 13 +-
drivers/gpu/drm/i915/gt/uc/intel_guc.h | 12 +-
drivers/gpu/drm/i915/gt/uc/intel_guc_ads.c | 125 +-
.../gpu/drm/i915/gt/uc/intel_guc_capture.c | 1655 +++++++++++++++++
.../gpu/drm/i915/gt/uc/intel_guc_capture.h | 33 +
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h | 12 +-
drivers/gpu/drm/i915/gt/uc/intel_guc_log.c | 126 +-
drivers/gpu/drm/i915/gt/uc/intel_guc_log.h | 7 +-
.../gpu/drm/i915/gt/uc/intel_guc_submission.c | 18 +-
drivers/gpu/drm/i915/i915_debugfs.c | 3 +-
drivers/gpu/drm/i915/i915_gpu_error.c | 282 ++-
drivers/gpu/drm/i915/i915_gpu_error.h | 35 +-
18 files changed, 2376 insertions(+), 181 deletions(-)
create mode 100644 drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h
create mode 100644 drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c
create mode 100644 drivers/gpu/drm/i915/gt/uc/intel_guc_capture.h
--
2.25.1
More information about the dri-devel
mailing list