[PATCH v5 3/9] arm64: dts: qcom: sc7280: Enable backlight for eDP panel

[Stephen Boyd]

Quoting Sankeerth Billakanti (2022-03-16 10:35:48)
> Enable backlight support for eDP panel on CRD platform for sc7280.
>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka at quicinc.com>
> ---
>
> Changes in v5:
>   - Separate out backlight nodes
>
>  arch/arm64/boot/dts/qcom/sc7280-crd.dts | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> index 2df654e..16d1a5b 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> @@ -37,6 +37,15 @@
>                 pinctrl-0 = <&edp_panel_power>;
>         };
>
> +       edp_backlight: edp-backlight {

Does this also move to qcard.dtsi? Why can't this be combined with the
previous patch?

> +               compatible = "pwm-backlight";
> +
> +               power-supply = <&vreg_edp_bp>;
> +               pwms = <&pm8350c_pwm 3 65535>;
> +
> +               enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
> +       };
> +
>         vreg_edp_bp: vreg-edp-bp-regulator {
>                 compatible = "regulator-fixed";
>                 regulator-name = "vreg_edp_bp";
> @@ -123,7 +132,9 @@ ap_ts_pen_1v8: &i2c13 {
>                 edp_panel: edp-panel {
>                         compatible = "edp-panel";
>
> +                       backlight = <&edp_backlight>;
>                         power-supply = <&edp_3v3_regulator>;
> +

Nitpick: Remove this newline from this hunk and put it in when
power-supply is introduced.

>                         ports {
>                                 #address-cells = <1>;
>                                 #size-cells = <0>;
> @@ -172,6 +183,13 @@ ap_ts_pen_1v8: &i2c13 {
>         };
>  };
>
> +&pm8350c_pwm {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&edp_bl_pwm>;

I see the pinctrl is used now but it would be easier to review this
patch if the pinctrl was in this patch.