[PATCH 1/2] drm: bridge: adv7511: fix CEC power down control register offset

[Alvin Šipraga]

From: Alvin Šipraga <alsi at bang-olufsen.dk>

The ADV7511_REG_CEC_CTRL = 0xE2 register is part of the main register
map - not the CEC register map. As such, we shouldn't apply an offset to
the register address. Doing so will cause us to address a bogus register
for chips with a CEC register map offset (e.g. ADV7533).

Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Alvin Šipraga <alsi at bang-olufsen.dk>
---
 drivers/gpu/drm/bridge/adv7511/adv7511.h     | 5 +----
 drivers/gpu/drm/bridge/adv7511/adv7511_cec.c | 4 ++--
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index 592ecfcf00ca..4e7cbaa9204f 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -386,10 +386,7 @@ void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
 #else
 static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
 {
-	unsigned int offset = adv7511->type == ADV7533 ?
-						ADV7533_REG_CEC_OFFSET : 0;
-
-	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
 		     ADV7511_CEC_CTRL_POWER_DOWN);
 	return 0;
 }
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
index 28d9becc939c..4ee7f2e911e3 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
@@ -303,7 +303,7 @@ int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
 		goto err_cec_alloc;
 	}
 
-	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset, 0);
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL, 0);
 	/* cec soft reset */
 	regmap_write(adv7511->regmap_cec,
 		     ADV7511_REG_CEC_SOFT_RESET + offset, 0x01);
@@ -330,7 +330,7 @@ int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
 	dev_info(dev, "Initializing CEC failed with error %d, disabling CEC\n",
 		 ret);
 err_cec_parse_dt:
-	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
 		     ADV7511_CEC_CTRL_POWER_DOWN);
 	return ret == -EPROBE_DEFER ? ret : 0;
 }
-- 
2.35.1