[PATCH v11 2/7] MIPS: Loongson64: dts: introduce ls3A4000 evaluation board

Sui Jingfeng 15330273260 at 189.cn
Wed Mar 23 01:53:14 UTC 2022


On 2022/3/23 00:06, Jiaxun Yang wrote:
>
>
> 在 2022/3/22 13:38, Sui Jingfeng 写道:
>>
>> On 2022/3/22 21:05, Jiaxun Yang wrote:
>>>
>>>
>>> 在 2022/3/21 16:29, Sui Jingfeng 写道:
>>>> From: suijingfeng <suijingfeng at loongson.cn>
>>>>
>>>> The board name is LS3A4000_7A1000_EVB_BOARD_V1.4, it consist of 1.8Ghz
>>>> mips64r5 4-core CPU and LS7A1000 bridge chip. It has PCIe GEN2 x8 
>>>> slot,
>>>> therefore can play with discrete graphics card.
>>>
>>> Hi Jingfeng,
>>>
>>> As we've discussed before if you are going to introduce new dts then 
>>> you *MUST*
>>> include it in makefile and wire it up in code.
>>>
>>> A dts file doing nothing lying in the tree is just suspicious.
>>>
>>> Thanks.
>>> - Jiaxun
>>>
>> Hi, Jiaxun,
>>
>> I know what you means, but it is the kernel side developer's job.
>> I am just a naive graphic driver developer,I can not care so much.
>> Below is my private patch which can be used to built specific dts
>> into the linux kernel, therefore make the verification easier.
> Hi Jingfeng,
>
> In kernel world we take care all the stuff we touched ourself :-)
>
> If you are not confident with them please drop those DTS from the 
> patchset
> besides the generic one. I can do the rest for you after getting this 
> set merged.
>
> Thanks.
> - Jiaxun
>
Hi, Jiaxun

Build all dts into vmlinuz will make the vmlinuz bigger and bigger.
How does the kernel get the dtb is another big issue, either from built-in
dtb or pass from the firmware(pmon and uefi etc). This should be
solved with another patch carefully. Providing board specific dts
helps to code review, it helps reviewers understand that there are
variant boards and have to be express with different OF graph.

Now, there are about 6 dts under arch/mips/boot/dts/loongson/,
Suppose loongson have 1000+ different board, do you want built all
of them into vmlinuz?

Besides, ls7a1000 and ls2k1000 lack a i2c driver, gpio driver,
pwm driver, clk driver, can you pay more attention to salve those
problems, please ?



More information about the dri-devel mailing list