[PATCH 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings
Rob Herring
robh at kernel.org
Wed Mar 23 18:17:23 UTC 2022
On Mon, Mar 14, 2022 at 04:10:02PM +0000, Biju Das wrote:
> The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. It
> can operate in DSI mode, with up to four data lanes.
>
> Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
> ---
> RFC->v1:
> * Added a ref to dsi-controller.yaml.
> RFC:-
> * https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.10773-22-biju.das.jz@bp.renesas.com/
> ---
> .../bindings/display/bridge/renesas,dsi.yaml | 146 ++++++++++++++++++
> 1 file changed, 146 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> new file mode 100644
> index 000000000000..74bc3782d230
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> @@ -0,0 +1,146 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L MIPI DSI Encoder
> +
> +maintainers:
> + - Biju Das <biju.das.jz at bp.renesas.com>
> +
> +description: |
> + This binding describes the MIPI DSI encoder embedded in the Renesas
> + RZ/G2L family of SoC's. The encoder can operate in DSI mode with up
> + to four data lanes.
> +
> +allOf:
> + - $ref: ../dsi-controller.yaml#
Full path preferred:
/schemas/display/dsi-controller.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - renesas,rzg2l-mipi-dsi # RZ/G2L and RZ/V2L
> +
> + reg:
> + items:
> + - description: Link register
> + - description: D-PHY register
D-PHY is not a separate block?
> +
> + clocks:
> + items:
> + - description: DSI D-PHY PLL multiplied clock
> + - description: DSI D-PHY system clock
> + - description: DSI AXI bus clock
> + - description: DSI Register access clock
> + - description: DSI Video clock
> + - description: DSI D_PHY Escape mode Receive clock
D-PHY
> +
> + clock-names:
> + items:
> + - const: pllclk
> + - const: sysclk
> + - const: aclk
> + - const: pclk
> + - const: vclk
> + - const: lpclk
> +
> + power-domains:
> + maxItems: 1
> +
> + resets:
> + items:
> + - description: MIPI_DSI_CMN_RSTB
> + - description: MIPI_DSI_ARESET_N
> + - description: MIPI_DSI_PRESET_N
> +
> + reset-names:
> + items:
> + - const: rst
> + - const: arst
> + - const: prst
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port at 0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Parallel input port
> +
> + port at 1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: DSI output port
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - data-lanes
> +
> + required:
> + - port at 0
> + - port at 1
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - power-domains
> + - resets
> + - reset-names
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/r9a07g044-cpg.h>
> +
> + dsi0: dsi at 10860000 {
> + compatible = "renesas,rzg2l-mipi-dsi";
> + reg = <0x10860000 0x10000>,
> + <0x10850000 0x10000>;
> + power-domains = <&cpg>;
> + clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
> + <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
> + <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
> + <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
> + <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
> + <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
> + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
> + resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
> + <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
> + <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
> + reset-names = "rst", "arst", "prst";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + dsi0_in: endpoint {
> + remote-endpoint = <&du_out_dsi0>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + dsi0_out: endpoint {
> + data-lanes = <1 2 3 4>;
> + remote-endpoint = <&adv7535_in>;
> + };
> + };
> + };
> + };
> +...
> --
> 2.17.1
>
>
More information about the dri-devel
mailing list